• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.5
• /
• pp.1311-1321
• /
• 2010

Sensor network is used to obtain sensing data in various area. The interval to sense the events depends on the type of target application and the amounts of data generated by sensor nodes are not constant. Many applications exploit long sensing interval to enhance the life time of network but there are specific applications that requires very short interval to obtain fine-grained, high-precision sensing data. If the number of nodes in the network is increased and the interval to sense data is shortened, the amounts of generated data are greatly increased and this leads to increased amount of packets to transfer to the network. To transfer large amount of packets fast, it is necessary that the delay between successive packet transmissions should be minimized as possible. In this paper, we propose SET(SendDoneEventbasedTransmission Technique)which reduces the delay between successive packet transmissions by using SendDone Event which informs that a packet transmission has been completed. In SET, the delay between successive packet transmissions is shortened very much since the transmission of next packet starts at the time when the transmission of previous packet has completed, irrespective of the transmission time. Therefore SET could provide high packet transmission rate given large amount of packets.

• Journal of Internet Computing and Services
• /
• v.17 no.6
• /
• pp.81-91
• /
• 2016

VANET is one of the most developed technologies many people have considered a technology for the next generation. It basically utilizes the wireless technology and it can be used for measuring the speed of the vehicle, the location and even traffic control. With sharing those information, VANET can offer Cooperative ITS which can make a solution for a variety of traffic issues. In this way, safety for drivers, efficiency and mobility can be increased with VANET but data between vehicles or between vehicle and infrastructure are included with private information. Therefore alternatives are necessary to secure privacy. If there is no alternative for privacy, it can not only cause some problems about identification information but also it allows attackers to get location tracking and makes a target. Besides, people's lives or property can be dangerous because of sending wrong information or forgery. In addition to this, it is possible to be information stealing by attacker's impersonation or private information exposure through eavesdropping in communication environment. Therefore, in this paper we propose Privacy Assurance Architecture for VANET to ensure privacy from these threats.

• Journal of Convergence for Information Technology
• /
• v.10 no.12
• /
• pp.15-21
• /
• 2020

Although IoT systems are used in a variety of heterogeneous environments as cloud environments develop, all IoT devices are not provided with reliable protocols and services. This paper proposes an IoT data management technique that can extend the IoT cloud environment to an n-layer multi-level structure so that information collected from different heterogeneous IoT devices can be efficiently sorted and processed. The proposed technique aims to classify and process IoT information by transmitting routing information and weight information through wireless data link data collected from heterogeneous IoT devices. The proposed technique not only delivers information classified from IoT devices to the corresponding routing path but also improves the efficiency of IoT data processing by assigning priority according to weight information. The IoT devices used in the proposed technique use each other's reliable protocols, and queries for other IoT devices locally through a local cloud composed of hierarchical structures have features that ensure scalability because they maintain a certain cost.y channels of IoT information in order to make the most of the multiple antenna technology.

• Journal of the Korean Ceramic Society
• /
• v.41 no.8
• /
• pp.599-604
• /
• 2004

The LTCCs (Low-Temperature Co-fired Ceramics) are very important for electronic industry to build smaller RF modules and to fulfill the necessity for miniaturization of devices in wireless communication industry. The dielectric materials with sintering temperature $T_{sint}$＜90$0^{\circ}C$ are required. In this study, BaO-N $d_2$ $O_3$-Ti $O_2$ (BNT ： 20∼40 wt％) for ceramic materials and L $a_2$ $O_3$- $B_2$ $O_3$-Ti $O_2$ (LBT ： 80∼60 wt％) for crystallizable glasses were used. The glass/ceramic composites were investigated for sintering behavior, phase evaluation, densities, interface reaction and microwave dielectric properties. It was found that the addition LBT glass frist significantly lowered the sintering temperature to below 90$0^{\circ}C$ and the densification with increasing addition LBT glass frist developed rapidly which was meant to be namely 90％ of relative density. The sintered bodies ekhibited applicable dielectric properties, namely 15 for $\varepsilon$$_{r}$,, 10000 GHz for Q＊ $f_{0}$. The results suggest that the composites have good potential as a new candidate for LTCC materials.

• The KIPS Transactions:PartC
• /
• v.14C no.3 s.113
• /
• pp.229-238
• /
• 2007

Sensor networks consist of many tiny sensor nodes that collaborate among themselves to collect, process, analyze, and disseminate data. In sensor networks, sensor nodes are typically powered by batteries, and have limited computing resources. Moreover, the redeployment of nodes by energy exhaustion or their movement makes network topology change dynamically. These features incur problems that do not appear in traditional, wired networks. Security in sensor networks is challenging problem due to the nature of wireless communication and the lack of resources. Several efforts are underway to provide security services in sensor networks, but most of them are preventive approaches based on cryptography. However, sensor nodes are extremely vulnerable to capture or key compromise. To ensure the security of the network, it is critical to develop suity mechanisms that can survive malicious attacks from "insiders" who have access to the keying materials or the full control of some nodes. In order to protect against insider attacks, it is necessary to understand how an insider can attack a sensor network. Several attacks have been discussed in the literature. However, insider attacks in general have not been thoroughly studied and verified. In this paper, we study the insider attacks against routing protocols in sensor networks using the Ad-hoc On-Demand Distance Vector (AODV) protocol. We identify the goals of attack, and then study how to achieve these goals by modifying of the routing messages. Finally, with the simulation we study how an attacker affects the sensor networks. After we understand the features of inside attacker, we propose a detect mechanism using hop count information.

• Journal of KIISE:Information Networking
• /
• v.34 no.1
• /
• pp.1-15
• /
• 2007

Increase in the wireless mobile network users brings the issue of mobility management into the Virtual Private Network (VPN) services. We propose a provider edge (PE)-based provider provisioned mobile VPN mechanism, which enables efficient communication between a mobile VPN user and one or more correspondents located in different VPN sites. The proposed mechanism not only reduces the IPSec tunnel overhead at the mobile user node to the minimum, but also enables the traffic to be delivered through optimized paths among the (mobile) VPN users without incurring significant extra IPSec tunnel overhead regardless of the user's locations. The proposed architecture and protocols are based on the BGP/MPLS VPN technology that is defined in RFC24547. A service provider platform entity named PPVPN Network Server (PNS) is defined in order to extend the BGP/MPLS VPN service to the mobile users. Compared to the user- and CE-based mobile VPN mechanisms, the proposed mechanism requires less overhead with respect to the IPSec tunnel management. The simulation results also show that it outperforms the existing mobile VPN mechanisms with respect to the handoff latency and/or the end-to-end packet delay.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.1
• /
• pp.618-624
• /
• 2017

In Seoul and most metropolitan cities, urban trains are delayed due to high congestion during commute times. The delay effect of passengers boarding and disembarking is also significant. In this study, a wide passenger door system was developed as a way to improve the scheduled speed of urban trains by decreasing the passengers' flow time. The door size was defined experimentally to shorten the entrance time. The optimum door size was also determined to improve the stop precision performance of the train while considering the interference effect with peripheral devices. Because the change in door size changes the structural characteristics of the vehicle, the structural stability of a train was analyzed numerically. A prototype of the wide door system was made, and the proposed design was verified using functional and endurance tests. The systematic development process can be used as design data for door size definition and system production when applying a wide door to improve the scheduled speed.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.47 no.2
• /
• pp.9-17
• /
• 2010

Recently, there has been much interest in orthogonal frequency division multiplexing (OFDM) for next generation wireless wideband communication systems. OFDM is a special case of multicarrier transmission, where a single data stream is transmitted over a number of lower-rate subcarriers. One of the main reasons to use OFDM is to increase robustness against frequency-selective fading or narrowband interference. However, in the radio systems it is also important to distortion introduced by high power amplifiers (HPA's) such as solid state power amplifier (SSPA) considered in this paper. Since the signal amplitude of the OFDM system is Rayleigh-distributed, the performance of the OFDM system is significantly degraded by the nonlinearity of the HPA in the OFDM transmitter. In this paper, we propose a canonical piecewise-linear (PWL) model based digital predistorter to prevent signal distortion and spectral re-growth due to the high peak-to-average power ratio (PAPR) of OFDM signal and the nonlinearity of HPA's. Computer simulation on an OFDM system under additive white Gaussian noise (AWGN) channels with QPSK, 16-QAM and 64-QAM modulation schemes and modulator/demodulator implemented with 1024-point FFT/IFFT, demonstrate that the proposed predistorter achieves significant performance improvement by effectively compensating for the nonlinearity introduced by the SSPA.

• Journal of IKEEE
• /
• v.11 no.4
• /
• pp.348-357
• /
• 2007

Due to the improved performance and cost of personal mobile devices and rapid progress of wireless communication technology, the number of users who utilize these devices is increasing. This trend requires various types of services be available to users. So far, there have been many solutions provided for the shortest path problem. But, technologies which can offer various recommendation services to user depending on user’s current location are focused on Euclidean spaces rather than road network. Thus, in this paper, we extend the previous work to satisfy this requirement on road network database. Our proposed scheme requires pre-computation for the efficient query processing. In the preprocessing step, we first partition the input road network into a fixed number of Voronoi polygons and then pre-compute routing information for each polygon. In the meantime, we select the number of Voronoi polygons in proposition to the scale of road network. Through this selection, the required size of pre-computation is linearly increasing to the size of road network. Using this pre-computated information, we can process queries more quickly. Through experiments, we have shown that our proposed scheme can achieve excellent performance in terms of scheduling time and the number of visited nodes.

• Spatial Information Research
• /
• v.18 no.1
• /
• pp.19-26
• /
• 2010

It is important to manage the underground facilities efficiently because they are directly related to the convenience and safety of citizens. But the fact that the different agencies take on a role of managing the underground facilities respectively makes it impossible. So Korean government has exerted great efforts to solve this problem through several projects. Korean government expects that the ubiquitous technologies such as sensor and wireless communication in the domain of the underground facilities management will be useful. It is main duty of u-City Management Center to monitor several situations about the underground facilities using ubiquitous technologies. But there is no consensus about what concrete situations it has to monitor even though u-cities under construction. Because local governments or related companies are in charge of carrying out these roles yet, there is no legal basis on which to do these tasks by the center. And it is needed to develop new technologies for u-services efficiently. Because technologies for u-service are vast, various and converged, so it necessary to develop them according to priority or in cooperation with other developers. In this paper, we classify the monitoring items for each facility which were investigated by a recent research. It is expected to make use of defining the role of the center and developing technologies with u-service.