• Journal of Biosystems Engineering
• /
• v.43 no.1
• /
• pp.81-81
• /
• 2018

• The Korean Journal of Food And Nutrition
• /
• v.30 no.1
• /
• pp.19-30
• /
• 2017

In this study, the quality characteristics of noodles containing different amounts of germinated black quinoa were investigated. The powder of black quinoa with the highest antioxidative activation was selected; and composite flour was prepared with 0%, 5%, 10%, 15%, and 20% of germinated black quinoa powder to produce the noodles. We evaluated the quality and sensory characteristics of the noodles, including pH, salinity, water absorption rate, volumetric expansion rate, turbidity, chromaticity, extensibility, and texture. With regards to the quality characteristics of noodles with added germinated black quinoa, the pH and salinity decreased with increasing percentage of added germinated black quinoa (p<0.001). Increasing the percentage of added germinated black quinoa resulted in decreased water absorption (p<0.01) and volumetric expansion rates and increased turbidity of the cooked noodles (p<0.001). In terms of the chromaticity, L and b values decreased and a value increased with the increasing percentage of added germinated black quinoa (p<0.001). For the texture, hardness (p<0.001), adhesiveness (p<0.01), springiness (p<0.01), chewiness (p<0.001), gumminess (p<0.001), and cohesiveness (p<0.05) decreased as the percentage of added germinated black quinoa increased; while extensibility (p<0.001) increased. Consumer testing results indicated that the noodles with 15% of added germinated black quinoa showed the best results. Collectively, the evaluation of quality characteristics and consumer acceptability indicated that adding 15% of germinated black quinoa to produce noodles is optimal.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.30 no.3
• /
• pp.74-83
• /
• 1998

The phenomenon of decrease in sizing efficiency when the stock temperature is increased is well recognized as summer sizing, and this is believed to be caused by uneven distribution of sizing agents on paper surface most often incurred by coagulation of sizing agents. When unevenly sized paper is used as coating base stock, nonuniform consolidation of the coating layer may result, which, in turn, causes uneven distribution of binder on coating surface. This causes nonuniform ink absorption to produce print mottle. In this study the effects of simple or polymeric electrolytes, storage temperature and time on the coagulation of cationic dispersed rosin size were investigated using a turbidity measurement method which was verified to correlate well with the particle size of rosin emulsion or its coagulates. Handsheets sized with rosin dispersions coagulated under various conditions were prepared and their sizing degree and coated paper properties including gloss and ink density were examined. The relationship between the sizing nonuniformity of coated papers and its ink absorption property was evaluated. Turbidity of rosin emulsion increased as the storage temperature and time were increased. Addition of simple or polymeric electrolytes caused reduction in $zeta$ -potential of the rosin dispersion and accelerated the coagulation tendency substantially. Reversion of the $zeta$ -potential of rosin dispersion, however, did not occur when coagulation was induced with simple electrolytes. On the other hand, addition of an anionic polyelectrolyte reversed the $zeta$ -potential of the flocculated rosin dispersion. This indicated that electrical double layer compaction and bridging flocculation were coagulation mechanisms for simple and polymeric electrolytes, respectively. Sizing degree decreased as coagulation of rosin was increased. Paper gloss, ink gloss and ink density were increased when sizing degree of base stock was increased most probably due to prevention of base paper swelling and increased binder migration to coating surface. This suggested that uneven printing ink density occurred when uneven sizing development was induced by coagulation of rosin particles.

• Journal of Korean Society of Water and Wastewater
• /
• v.33 no.5
• /
• pp.395-404
• /
• 2019

The point-of-use water dispenser systems are widely used because of convenience in handling and demand for high-quality drinking water. The application has been increased recently in the public places such as department stores, universities and the rest areas in express ways. Improvement of water qualities by the dispenser systems was compared with tap water in this study. The tap water is supplied to the dispenser as the influent of the dispenser system. The twelve dispensers in the public places were used. The five dispensers used reverse osmosis as the main filter and other dispensers used various filters such as ultrafiltration, nanofiltration, and alumina filter. The water quality indicators for sanitation safety, i.e., turbidity and total coliforms, were evaluated. Other water qualities such as pH, residual chlorine, heterotrophic plate count (HPC), and total cell counts were also analyzed. By the point-of-use water dispenser, the turbidity, residual chlorine and pH were decreased and the HPC and total cell counts were increased. The t-test results revealed that the HPC of the tap waters were not significantly different from the treated waters but the total cell counts of the two groups were significantly different. The low pH of the RO filter treatment was also significantly different from the tap waters. This study will contribute to understand the role of the point-of-use water dispenser in improving water quality and to identify key water quality for the proper maintenance of the dispenser systems.

• Journal of Korean Society on Water Environment
• /
• v.27 no.6
• /
• pp.855-861
• /
• 2011

Short-term effects of current velocity and turbid water on the benthic diatom community and water quality were examined in artificial channel ($20{\times}200{\times}10cm$) with two different experiments. The first and second experiments were consisted of different current velocities such as 1 L/min., and 1, 3, and 6 L/min., respectively. The concentration of turbid water is prepared with loess and fixed at 10 and 20 times of the turbidity of control inflow (10 NTU, LTW), respectively. At experiment 1 (EXP-1), introduction of turbid water increased dissolved oxygen, electric conductivity, pH and turbidity, but there were no differences between low- (100 NTU, MTW) and high-turbid water (200 NTU, HTW). However, experiment 2 (EXP-2) did not change any environmental parameters except dissolved total and inorganic nitrogen like EXP-1. MTW in EXP-1 strongly stimulated the growth of benthic diatom, while both MTW (150 NTU) and HTW (300 NTU) in EXP-2 did not increase or decrease the diatom abundance. Over the study, the dominant species was four, Aulacoseira ambigua, Cyclotella stelligera, Aulacoseira granulata and Achnanthes minutissima. In EXP-1, two highest species in abundance, A. ambigua and A. granulata were highly grown in MTW, while Achnanthes minutissima high in HTW adversely. These results indicate that the introduction of turbid water can play an important role in the shift of water quality and benthic diatom community in stream ecosystem, especially inflow of soil water in low current velocity.

• Journal of Korean Society of Water and Wastewater
• /
• v.21 no.2
• /
• pp.203-214
• /
• 2007

This study aimed at researching the process selection for two-stage and dual media filtration system, as a technology substituting the existing sand filter without expanding the site when retrofitting an old filter bed or designing a new one. In order to select the process for optimum complex filtration system, three running conditions have been tested. Test results demonstrated that Run 3 in which the 1st stage was filled with anthracite and coarse sand, and the 2nd stage was filled up with activated carbon and fine sand reduced the head loss and the load of turbidity substances. Also, Run 3 showed better performance in removing TOC, particle counts, THMFP and HAAFP, compared to other two conditions. 99 % of Cryptosporidium was removed. Bisphenol-A was rarely removed from the 1st stage of coarse sand and 2nd stage of fine sand, but 99 % of it was removed from the 2nd stage of activated carbon. In conclusion, when it is required to retrofit an old rapid filter bed or design a new one for the purpose of improving filtration performance, the following two-stage and dual media filtration system is suggested: the 1st stage of filter bed needs to be filled up with coarse sand to remove turbidity as the pretreatment for extending duration of filtering, the top part of 2nd stage needs to be filled up with granular activated caron to remove dissolved organic matters and others as the main process, and finally the bottom part of 2nd stage needs to be filled up with fine sand as the finishing process.

• Journal of Korean Society on Water Environment
• /
• v.39 no.2
• /
• pp.153-161
• /
• 2023

The reservoir tank in an apartment is crucial for maintaining the quality of drinking water after it has undergone treatment. Investigating the water quality and potential contaminants in the reservoir tank is essential to ensure the safety of the drinking water. This study examined the water quality and precipitated suspended solids that accumulate at the bottom of the reservoir tanks in four apartments located in Gyeonggi province. As a result of the water quality investigation, turbidity increased proportionally to the distance from the water treatment plant (WTP) to the household. Heavy metals were also detected in the reservoir tank inlet but not in the water supplied from the WTP. The precipitated suspended solids (SS) in the reservoir tank contain high levels of heavy metals and total organic carbon (TOC). The precipitated SS mainly consists of Al, Mn, and Fe, which are expected to be a combination with turbidity-inducing substances. The X-ray diffraction (XRD) analysis revealed the presence of γ-FeO(OH), MnO₂, and β-Fe₂O₃ in the SS. Additionally, F-EEM analysis indicates that the dissolved organic matter in the SS is mainly derived from a natural water source and microorganism activities, including metal-oxidizing bacteria and biofilms that can absorb metal ions. Based on these findings, several countermeasures can be taken to prevent the inflow of SS into the household, including regularly cleaning the reservoir tank, replacing or cleaning old pipes in the water supply system, and implementing monitoring and filtering systems to manage the SS.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.28 no.3
• /
• pp.251-262
• /
• 2014

This article is for understanding dementia with the perspective of Korean Medicine through research on syndrome differentiations of dementia clinically applied and relations between modern diseases and Korean Medicine pattern types of dementia. clinical papers were searched in China Academic Journals(CAJ) of China National Knowledge Infrastructure(CNKI) from 2012 to 2013. Conclusions are as follows. First, dementia was expressed in many ways such as imbecility, stupidity, fatuity, idiocy, vacuity, etc and was related with amnesia, forgetfulness, speech not in the right order, depressive psychosis(quiet insanity), manic psychosis, depression syndrome. Second, prescriptions such as QiFuYin and ZuoGuiWan from JingYueQuanShu, XiXinTang and ZhiMiTang from BianZhengLu, TongQiaoHuoXueTang, XueFuZhuYuTang and BuYangHaiWuTang from YiLinGaiCuo, HaiShaoDan from YiFangJiJie, HuangLianJieDuTang from WaiTaiMiYao were suggested for dementia. Third, syndrome differentiation pattern types of dementia are kidney deficiency and marrow decrease, qi-blood depletion, liver-kidney depletion, spleen-kidney depletion, heart-spleen deficiency as deficiency patterns and effulgent heart-liver fire, ascendant hyperactivity of liver yang, qi stagnation and blood stasis, phlegm turbidity obstructing orifice, phlegm-blood stasis obstructing orifice, intense heat toxin as excess patterns and qi deficiency with blood stasis, yin deficiency with yang hyperactivity as deficiency-excess complex patterns. Major pattern types are kidney deficiency and marrow decrease, phlegm-blood stasis obstructing orifice, qi stagnation and blood stasis, liver-kidney depletion, phlegm turbidity obstructing orifice.

• Journal of Korean Society of Water and Wastewater
• /
• v.18 no.6
• /
• pp.770-777
• /
• 2004

Three pilot-scale membrane systems were operated using lake water as influent in this study. Microfiltration (MF) membrane with pore size of 0.01 m was used in Systen I of which filtration mode was set at constant pressure of $1kgf/cm^2$. Ultrafiltration (UF) membranes with molecular cutoff (MWCO) of 80,000 and 13,000 were used in System II-1 and II-2, respectively. Constant flow mode was applied at the range between 0.7 and $1.5m^3/m^2{\cdot}d$ (average of $1.1m^3/m^2${\cdot}d) for System II-1 and between 0.37 and $1.65m^3/m^2{\cdot}d$ (average of $1.18m^3/m^2{\cdot}d$) for System II-2. In System I, the flux changed from $1m^3/m^2{\cdot}d$ to $0.2m^3/m^2{\cdot}d$ during the operation time of 5 months. System II showed recovery of 94% under the allowable maximum pressure of $3kgf/cm^2$ during the same operation period. From these results, the efficient operation was observed in constant flow mode with respect to filtration time and recovery. Average filtrate turbidity showed 0.0071 NTU in System I and 0.0054 NTU in System II, which implied that high turbidity removal was obtained in both MF and UF systems with no significant difference between MF and UF. From the fact that membrane flux depends largely on membrane type and operation mode, a guideline of optimum design and operation should be suggested for application of membrane systems to full scale water treatment.

• Journal of Korean Society of Water and Wastewater
• /
• v.17 no.4
• /
• pp.487-494
• /
• 2003

In this research, water qualities of river water and bank-filtrate were compared for six months including winter season. The location studied was Galjon area, the downstream of the Nakdong river. The well for bank-filtrate was installed 40 m apart from riverside. Main analytic results of bank-filtrate and river water were summarized as followings; the average concentrations in bank-filtrate were turbidity 0.8NTU, TN 0.4mg/l, $BOD_5$, 0.1mg/l, $KMnO_4$ consumption 1.6mg/l, heterotrophic bacteria 350cfu/ml, Fe 0.5mg/l, Mn 0.99mg/l while the average concentrations in river water were turbidity 6.1NTU, TN 3.9mg/l, $BOD_5$, 3.6mg/l, $KMnO_4$ consumption 11mg/l, heterotrophic bacteria 1,640cfu/ml, Fe 0.28mg/l, Mn 0.04mg/l. Water quality of bank-filtrate was mostly shown a good results than it of river water excepting Fe and Mn. In even basic constituents such as water temperature and pH, bank-filtrate was very settled while river water was extraordinary changable and high. In case of nitrogen, especially, total nitrogen of river water was 3.9mg/l while it of bank-filtrate was 0.4mg/l and its reduction was very high. The reason is that $NH^+_4-N$ among total nitrogen in the river water is nitrified and then denitrified in soil layer when it is pumped up as bank-filtrate. But Fe and Mn caused by the characteristics of soil was very high in bank-filtrate while Mn in river water was particularly very low and settled. As the distance between riverside and well was longer, concentration of Fe and Mn may be went up while its bacteria may be reduced.