• Journal of Power Electronics
• /
• v.11 no.3
• /
• pp.335-341
• /
• 2011

This paper presents an improved orientation strategy for energy-efficiency in photovoltaic (PV) panels. Conventionally, PV panels are tilted with the site's latitude angle or the difference between the latitude angle and the solar declination angle. A monthly-based orientation strategy has been proposed and analyzed in this study. The proposed strategy implies that the PV panels are tilted with the monthly-based angle that achieves the maximum incident radiation. Furthermore, the impact of using the proposed orientation strategy and three conventional strategies on the produced power and on the PV system design features has been investigated in detail. A Japanese city (Fukuoka) and an Egyptian city (Al-Kharijah) have been considered as locations for the PV power system installation. The results showed that the proposed strategy achieved an increase in the power produced from the PV power systems at the two different sites, and consequently the required solar cells area can be saved. Therefore, the cost of the PV power system components can be reduced including the solar cells area and the land area.

• 한국전산유체공학회:학술대회논문집
• /
• 2009.04a
• /
• pp.43-50
• /
• 2009

In order to reduce the download around Smart UAV(SUAV) at hovering and transition mode, flow control using synthetic jet has been performed. Many of the complex tilt rotor flow features are captured including wing leading and trailing edge separation, and the large region of separated flow beneath the wing. First, in order to control the trailing edge separation, synthetic jet is located at 30, 95% of flap chord length. The flow control using synthetic jet on flap shows that stall characteristics depending on several mode can be improved through separation vortices resizing. Also, a flap jet and a 0.01c jet which control the separation efficiently are applied at the same time at each test case because controlling the leading edge separation is essential for download reduction. As a result, time averaged download is reduced about 18% comparing with no control case at hovering mode and 48% at transition mode. These research results show that if flow control using leading edge jet and trailing edge jet is used effectively to the SUAV in overall flight mode, flight performance and stability can be improved.

• Journal of Broadcast Engineering
• /
• v.16 no.1
• /
• pp.178-181
• /
• 2011

With the development of mobile devices and intelligent surveillance system loaded with pan/tilt cameras, object tracking with non-stationary cameras has become a topic with increasing importancy. Since it is difficult to model a background image in a non-stationary camera environment, colors and texture are the most important features in the tracking algorithm. However, colors in the background similar to those in the target arise instability in the tracking. Recently, we proposed a robust color based tracking algorithm that uses an area weighted centroid shift. In this letter, we update the model such that it becomes more stable against background colors. The proposed algorithm also incorporates time filtering by adding an additional energy term to the energy functional.

• Journal of Environmental Science International
• /
• v.22 no.5
• /
• pp.543-554
• /
• 2013

Acoustic Doppler Current Profilers (ADCPs) are increasingly popular in the river research and management communities being primarily used for estimation of stream flows. ADCPs capabilities, however, entail additional features that are not fully explored, such as morphological representation of river or reservoir bed based upon multi-beam depth measurements. In addition to flow velocity, ADCP measurements include river bathymetry information through the depth measurements acquired in individual 4 or 5 beams with a given oblique angle. Such sounding capability indicates that multi-beam ADCPs can be utilized as an efficient depth-sounder to be more capable than the conventional single-beam eco-sounders. The paper introduces the post-processing algorithms required to deal with raw ADCP bathymetry measurements including the following aspects: a) correcting the individual beam depths for tilt (pitch and roll); b) filtering outliers using SMART filters; d) transforming the corrected depths into geographical coordinates by UTM conversion; and, e) tag the beam detecting locations with the concurrent GPS information; f) spatial representation in a GIS package. The developed algorithms are applied for the ADCP bathymetric dataset acquired from Han-Cheon in Jeju Island to validate themselves applicability.

• Clinical and Experimental Pediatrics
• /
• v.52 no.7
• /
• pp.798-803
• /
• 2009

Purpose : We aimed to examine the effectiveness of the head-up tilt test (HUT) for the diagnosis of syncope or presyncope in children and adolescents. Methods : HUT results and clinical features of 160 children and adolescents with syncope or presyncope were studied from May 2003 through March 2008 at the Chonbuk National University Hospital. The children and adolescents were subjected to $70^{\circ}$ HUT for 45 minutes. The testees were divided into 2 groups: group I (children) comprising 39 children in the age range 7-12 years (mean, $10.59{\pm}1.60$ years) and group II (adolescents) comprising 121 adolescents in the age range 13-20 years (mean, $15.93{\pm}2.28$ years). Positive result rates of the HUT and types of hemodynamic response to the test in the 2 groups were compared. Results : Of the 160 testees, 92 (57.5%) showed positive HUT results; they showed 3 patterns of response to tilting. Twelve patients showed a predominantly vasodepressor response; 10 patients showed a cardioinhibitory response; and 70 patients showed a mixed response. The positive result rates were 43.6% (17/39) and 62.0% (75/121) in groups I and II, respectively. Mixed response was the predominant positive hemodynamic response in both the groups. Conclusion : The HUT is a useful diagnostic tool for evaluating the condition of pediatric patients, including adolescents, with syncope. Further, it may be considered as the first step for evaluating the condition of such patients.

• Journal of Korean Foot and Ankle Society
• /
• v.20 no.1
• /
• pp.12-18
• /
• 2016

Purpose: The purpose of this study is to review the indications of ankle lateral complex reconstruction using tendon graft. Materials and Methods: We searched PubMed using the index, "ankle, instability, lateral ligament, reconstruction" from 1990 to present (September 30, 2015). We excluded 1) modified Brőstrom operation (MBO), 2) conventional tenodesis surgery, 3) review article, 4) technical note, and 5) articles written in another foreign language. We reviewed 24 papers through the publication events, operational method, the indications of surgery, and the specific features of the patient group. Results: There were the indications of 1) previous ligament surgery failure, 2) situation when ligament repair is impossible due to the ligament defect, 3) severe instability (preoperative talar tilt >$15^{\circ}$, anterior draw >10 mm or the difference of contralateral side talar tilt >$5^{\circ}$, anterior draw >3 mm), and 4) overweight (body mass index >$30kg/m^2$). Other considerations included 1) generalized joint laxity and 2) workers, highly-demanded or athlete highly-affected by instability. Conclusion: The ankle lateral complex reconstruction using tendon graft could be indicated in patients with the possibility of MBO failure with several considerations.

• Journal of Korean Neurosurgical Society
• /
• v.54 no.3
• /
• pp.201-206
• /
• 2013

Objective : To investigate the sagittal sacropelvic morphology and balance of the patients with SIJ pain following lumbar fusion. Methods : Among 452 patients who underwent posterior lumbar interbody fusion between June 2009 and January 2013, patients with postoperative SIJ pain, being responded to SIJ block were enrolled. For a control group, patients matched for sex, age group, the number of fused level and fusion to sacrum were randomly selected. Patients were assessed radiologic parameters including lumbar lordosis, pelvic incidence (PI), pelvic tilt (PT) and sacral slope (SS). To evaluate the sagittal sacropelvic morphology and balance, the ratio of PT/PI, SS/PI and PT/SS were analyzed. Results : A total of 28 patients with SIJ pain and 56 patients without SIJ pain were assessed. Postoperatively, SIJ pain group showed significantly greater PT (p=0.02) than non-SIJ pain group. Postoperatively, PT/PI and SS/PI in SIJ pain group was significantly greater and smaller than those in non-SIJ pain group respectively (p=0.03, 0.02, respectively) except for PT/SS (p=0.05). SIJ pain group did not show significant postoperative changes of PT/PI and SS/PI (p=0.09 and 0.08, respectively) while non-SIJ pain group showed significantly decrease of PT/PI (p=0.00) and increase of SS/PI (p=0.00). Conclusion : This study presents different sagittal sacropelvic morphology and balance between the patients with/without SIJ pain following lumbar fusion surgery. The patients with SIJ pain showed retroversed pelvis and vertical sacrum while the patients without SIJ pain have similar morphologic features with asymptomatic populations in the literature.

• Archives of Plastic Surgery
• /
• v.46 no.5
• /
• pp.414-420
• /
• 2019

Background Congenital muscular torticollis (CMT) is characterized by persistent head tilt toward the affected side. No consensus exists regarding the cause of this disorder. In this study, we analyzed various clinical factors in patients with CMT who were treated with surgical release. This analysis enabled us to identify potential causative factors of CMT and to establish a basis for surgical interventions. Methods In total, 584 patients who underwent surgical intervention for CMT from October 2007 to December 2016 were included in this study. Their demographic characteristics, birthrelated factors, and clinical features were analyzed. Results Data from 525 patients were analyzed in this study after exclusion of those with insufficient information. Before birth, 31 patients (5.9%) were diagnosed with oligohydramnios, and 87 (16.6%) had a breech presentation. Seven (1.3%) cases of clavicle fracture and two (0.4%) cases of cephalohematoma were noted at birth. Before surgery, 397 patients (75.6%) underwent physiotherapy and 128 patients (24.4%) did not. The duration of physiotherapy ranged from 1 to 50 months (average, 6 months). Conclusions Our study shows that 16.6% of the CMT patients presented in the breech position, which is a much higher rate than that observed in the general population (3%-4%). We hypothesize that being in the breech position as a fetus appears to exert a significant influence on shortening and fibrosis of the sternocleidomastoid muscle.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.1202-1205
• /
• 2005

This paper describes a method for vision-based person identification that can detect, track, and recognize person from video using multiple cues: height and dressing colors. The method does not require constrained target's pose or fully frontal face image to identify the person. First, the system, which is connected to a pan-tilt-zoom camera, detects target using motion detection and human cardboard model. The system keeps tracking the moving target while it is trying to identify whether it is a human and identify who it is among the registered persons in the database. To segment the moving target from the background scene, we employ a version of background subtraction technique and some spatial filtering. Once the target is segmented, we then align the target with the generic human cardboard model to verify whether the detected target is a human. If the target is identified as a human, the card board model is also used to segment the body parts to obtain some salient features such as head, torso, and legs. The whole body silhouette is also analyzed to obtain the target's shape information such as height and slimness. We then use these multiple cues (at present, we uses shirt color, trousers color, and body height) to recognize the target using a supervised self-organization process. We preliminary tested the system on a set of 5 subjects with multiple clothes. The recognition rate is 100% if the person is wearing the clothes that were learned before. In case a person wears new dresses the system fail to identify. This means height is not enough to classify persons. We plan to extend the work by adding more cues such as skin color, and face recognition by utilizing the zoom capability of the camera to obtain high resolution view of face; then, evaluate the system with more subjects.

• The Bulletin of The Korean Astronomical Society
• /
• v.36 no.2
• /
• pp.155.1-155.1
• /
• 2011

The Korea Astronomy and Space Science Institute (KASI) and the Department of Astronomy at the University of Texas at Austin (UT) are developing a near infrared wide-band high resolution spectrograph, IGRINS (Immersion Grating Infrared Spectrograph). The white-pupil design of the instrument optics uses 7 cryogenic mirrors including 3 aspherical off-axis collimators and 4 flat fold mirrors. Two of the 3 collimators are H- and K-band pupil transfer mirrors and they are designed as compensators for the system alignment in each channel. Therefore, their mount design will be one of the most sensitive parts in the IGRINS optomechanical system. The other flat fold mirrors are designed within the limited area. Each of those includes the features of 3 axial hard points and 2 radial hard points with one spring plunger in order for the proper deflection of the mirror. The design work will include the computer-aided 3D modeling and finite element analysis (FEA) to optimize the structural stability and the thermal behavior of the mount models. The mount body will also include a tip-tilt and translation adjustment mechanism to be used as the alignment compensators.