• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.544-547
• /
• 2006

In this study, the characteristics of large area internal linear ICP sources of $1,020mm{\times}920mm$ (substrate area is $880mm{\times}660mm$) were investigated using a multiple linear antennas with U-type parallel connection. Using the multiple linear antennas with U-type parallel connection, a high plasma density of $2{\times}10^{11}/cm^3$ and a high power transfer efficiency of about 88% could be obtained at 5kW of RF power and with 20mTorr Ar. A low plasma potential of less than 26V and a low electron temperature of $2.6{\sim}3.2eV$ could be also obtained. The measured plasma uniformity on the substrate size of 4th generation $(880mm{\times}660mm)$ was about 4%, therefore, it is believed that the multiple linear antennas with U-type parallel connection can be successfully applicable to the large area flat panel display processing.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집E
• /
• pp.733-737
• /
• 2001

Heat generated from the electronic parts in PDP is undesirable physical properties. To attain optimal arrangement of the electronic parts in PDP, thermal flows in PDP should be analyzed. PIV measurement has been made to quantify the characteristics of the inner flows and outer flows of an actual PDP. The quantity of heat flux from PDP has been estimated using the PIV results. Measurement system consists of Ar-ion laser, CCD camera and an image grabber installed on a host computer.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2004년도 전력전자학술대회 논문집(1)
• /
• pp.425-429
• /
• 2004

A new multi-level type energy recovery sustaining driver for AC PDP(Plasma Display Panel) is proposed in this paper. The multi-level driver has been developed to reduce the voltage stress on switching elements. Comparing the proposed driver with the conventional multi-level driver, 4 switching elements, 4 diodes, and two auxiliary capacitors are eliminated in the viewpoint of circuit structure. Moreover, the voltage stress on switching elements is more reduced and the sustain period is extended. To verify the validity of the proposed energy recovery circuit, computer simulations using PSpice program are carried out.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 E
• /
• pp.2218-2220
• /
• 1999

Plasma Display Panel(PDP) has mirco-cell, so it is difficult to know the physical properties of particles in PDP cell. To know this, we made a cell that is 200 times as large as a general PDP cell. Using this cell, the temperature and the density of electrons have been measured by the fast scanning probe.

• 한국표면공학회지
• /
• 제37권3호
• /
• pp.185-190
• /
• 2004

Plasma Display Panel is a display device emitting fluorescent light from gas discharge between a front and a rear panel sealed together. Front and rear panel have multitude of film layers and barrier ribs in the rear panel has the largest area so releasing various gases and affecting light emitting characteristics and lifetime. The remaining gases in a barrier rib were studied by thermal desorption analysis up to $400^{\circ}C$ and main gases were $H_2$ $H_2$O, CO. During sustaining at $300^{\circ}C$, the outgassing rates from other gases were decreased but$ H_2$ kept constantly increasing until 1 hour, which can be originated from the dissociation of organics remained in the inside of barrier rib material. In $H_2$O, two distinct peaks were observed: desorption from physically adsorbed one at $l00^{\circ}C$ and from chemically adsorbed one $400^{\circ}C$. The result can be utilized in interpretation of electronic and optical characteristics and evacuation process control of PDP

• 한국산학기술학회논문지
• /
• 제10권1호
• /
• pp.39-45
• /
• 2009

디스플레이 장치에서 기존의 CRT는 곡면이며 무겁고 큰 부피 때문에 LCD, PDP와 같은 평판디스플레이(FPD)로 대체되고 있다. FPD는 $0.6{\sim}0.8mm$ 두께의 대면적 글래스에 여러 공정을 거친 후에 최종 제품 규격으로 절단하여 제작하기 때문에 글래스의 면적이 크면 클수록 FPD의 생산성이 높다는 밀접한 관계를 갖는다. 따라서 FPD 제조 업계에서는 글래스 면적을 증가시키기 위하여 노력하고 있다. 7세대 글라스($2,220mm\;{\times}\;1,870mm\;{\times}\;0.7mm$)를 대상으로 유한요소해석 및 유동해석을 통하여 이송장치, 배급장치, 수평/경사 변환장치 및 제어장치로 구성된 비접촉 공기부상 이송시스템을 개발하였다. 본 개발에서 확보한 설계기술을 통하여 글라스의 크기가 대형화 되더라도 관련 이송장비를 보다 쉽게 제작하여 적용할 수 있다.

• 산업과 과학
• /
• 1권1호
• /
• pp.16-22
• /
• 2022

디스플레이는 브라운관을 시작으로 PDP(Plasma Display Panel), LCD(Liquid Crystal Display) 이후 AMOLED(Active Marix Organic Light Emitting Diode) 순으로 시장을 형성하고 있다. 유기발광다이오드 OLED는 4차 산업혁명을 준비하는 각 국가들의 발전을 위한 핵심 분야로 인정받고 있는 기술이며, 특히 국내 최고업계 삼성 디스플레이, LG디스플레이는 OLED의 90%이상의 점유율로 시장을 주도하고 있다. 현재 AMOLED는 접거나 휠 수 있는 영역으로 옮겨왔으며, 이와 같은 기술이 가능한 이유는 플렉서블 기판상에 TFT(Thin Film Transistor)와 OLED가 형성가능하기 때문이다. 향후 스트레처블 디스플레이로 그 기술은 이동할 것이며, 이를 위해서는 늘어나는 기판 소재 개발이 우선 진행되고, 다음으로 TFT, OLED 소자 역시 늘어날 수 있는 재료로 구현되어야 할 것이다.

• 조명전기설비학회논문지
• /
• 제20권7호
• /
• pp.14-20
• /
• 2006

본 연구는 위치지정 중첩 화상표시 구동방식에서 표시방전 유지펄스의 휴지기간 폭에 대한 방전특성을 실험한 것이다. 실험결과, 표시방전은 벽전하 뿐만 아니라 공간전하의 영향도 강하게 받는다는 것을 알았다. 휴지기간 바로 다음에 나오는 첫 번째 표시방전은 휴지기간에 대한 의존도가 높으며 두 번째 표시방전은 의존도가 매우 낮았다. 첫 번째 표시방전이 다소 불충분해도 어느 정도이상 벽전하가 축적되기만 하면 두 번째 표시방전은 안정적으로 유도될 수 있으나 공간전하의 영향을 고려하면 휴지기간의 폭은 $30[{\mu}s}]$ 이내가 바람직하다. 또한 휴지기간의 폭이 $30[{\mu}s}]$까지는 약 12[V]의 균일한 표시방전 전압의 동작마진을 얻을 수 있었다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2003년도 International Meeting on Information Display
• /
• pp.722-725
• /
• 2003

In AC plasma display, it is very important to quantify the wall voltage induced by the wall charge accumulated on the dielectric surface. If we know the quantities of the wall voltage in each period of every sequence; reset period, address period and sustain period, then it helps us to design the optimal driving waveform for high efficiency plasma display. We develop a new method to measure the wall voltage with VDS (Versatile Driving Simulator) system. From this method the wall voltage induced by a wall charge profiles just after the reset discharge of every cells in plasma display panel can be investigated and analyzed successfully. It is noted that the wall voltage profiles are influenced by the space charge and then they are stabilized as time goes by. It is also noted that both the remaining wall charge at the previous sequence and space charges contribute to wall voltage quantities just after the reset discharge. It is noted that the wall charges contribute dominantly after a few hundreds microseconds, while the space charges have been decayed within 100 ${\mu}s$ just after the reset discharge.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2005년도 전력전자학술대회 논문집
• /
• pp.93-95
• /
• 2005

A new energy-recovery- sustain circuit suitable for a Plasma Display Panel(PDP) application is proposed. The proposed circuit features the low device voltage stresses, essential to design a power efficient and low cost PDP driver circuit. The proposed circuit is demonstrated experimentally for driving a 42 inches plasma display panel.