• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2009년도 춘계학술대회 논문집
• /
• pp.1989-1992
• /
• 2009

Maintenance is classified preventive maintenance before performing equipment failure and corrective maintenance after performing equipment failure. In preventive maintenance, we may analyze the failure data to end from beginning of equipment and allocate maintenance method and calculate maintenance cycle quantitatively by the failure data analysis. So, it has a merit to reduce system maintenance cost and to operate effectively but, it require high cost in system introducing and continuous operation to end of system. In corrective maintenance, we may calculate MTTR(mean time to repair) quantitatively based on function failure time. it can be based on establishing maintenance system for operation efficiency. In this paper, we may reflect the MTTR for the onboard equipped in Tilting train to establish maintenance system for Tilting train operation efficiency.

• 소음진동
• /
• 제4권4호
• /
• pp.459-467
• /
• 1994

Various maintenance programs and techniques have been implemented for roating machineries, since machines were invented for commerical use. The earliest type of maintenance was run-to-failure, where the machine was run until a fault caused to fail in service. It was obviously an expensive approach due to the unpredictability of the machine condition. Another type is the periodic maintenance, where machines are disassembled and overhauled on regular schedules. With the advent of reliable data collectors including FFT analyzer and developing of versatile supporting software such as ExpertALERT system, the predictive maintenance is known to be the most feasible maintenance type these days. The vibration analysis enables for a maintenance crew to find the exact cause of fault on a machine and to make a proper maintenance schedule with a trend analysis. The predicitive maintenance is considered to be the most important part of pro-active maintenance.

• 한국산학기술학회논문지
• /
• 제22권6호
• /
• pp.477-483
• /
• 2021

군의 정비체계에서 표준정비인시는 정비부대의 정비능력을 판단하는 도구로서 정비 소요와 작업량을 결정하는 기준을 제공하고, 정비계획 수립의 기초 자료로 활용된다. 군 주요 장비의 평시 표준정비인시는 이미 선정되어 활용하고 있으나 전시 정비환경에서 표준정비인시는 미선정되어 이를 산출할 필요성이 제기되었다. 이는 전시에 정비 시설, 공구, 장비, 인력 등이 충분치 않고, 정비 목표와 수준이 평시와는 상이하므로 평시 표준정비인시를 직접 적용하는 것은 적절하지 못하기 때문이다. 따라서 본 연구는 전시 표준정비인시 산정을 위해 필요한 데이터를 수집·선별하는 과정과 기준을 제시하고, 표준정비인시 산출 프로세스에서 정비인시 분포의 특징을 분석하여 표준정비인시로서의 대푯값을 선정하는 방법을 제안한다. 제시되는 전시 정비인시 산출 프로세스는 먼저 전시 정비환경을 고려한 기준과 가정사항 등을 반영한 모델을 설계하고, 표준정비인시 도출의 통계적 기법을 결정하며, 전시와 유사한 환경의 평시 정비실적 데이터를 수집하여 기술통계 분석과 정비인시 분포를 추정 및 검증하고 최종적으로 대푯값을 제시하는 방법을 사용한다. 제안된 방법을 토대로 육군이 운용 중인 4개 주요 전투장비의 전시 표준정비인시를 도출하였으며, 해당 장비들의 정비인시 분포가 로그 정규분포를 따르고 있는 것으로 분석되어 신뢰성 있는 결과값을 제시하였다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 춘계학술대회 논문집
• /
• pp.1350-1358
• /
• 2008

Recently the study related to life cycle cost analysis of railway structure consisted of a complex is proceeded covering several range, which is considering the methodology of efficiency and rationalization for maintenance and analysing long-time behavior of the structure of looking at standpoint from asset management and safety. But LCCA(life cycle cost analysis) of railway structure was almost impossible as there were not anything datum for maintenance plan, such as maintenance periods related to each of components(painting and corrosion of steel, and cracking of elements, etc)and maintenance proportion, despite of its 100-year history. According, for collecting data related to railway truss bridge, bridge record cards and testing safety papers, and researching question, etc are surveyed and classified for LCC Analysis. Especially, LCC assessment on the side of assets-maintenance considering about initial cost, maintenance cost, and indirect cost is constructed. Maintenance period and complementary measure rate are very important in maintenance. To decide maintenance period, Baysian updating method is applied.

• Journal of Construction Engineering and Project Management
• /
• 제4권3호
• /
• pp.21-32
• /
• 2014

The practiced conventional methods for maintenance management in Malaysian Polytechnic faced many issues due to poor service delivery, inadequate finance, poor maintenance plan and maintenance backlogs. The purpose of this study is to improve the conventional method practices which tend to be ineffective in Malaysian Polytechnic. The case studies were conducted with eight Polytechnics and are selected based on conventional method practices and its major problems. There are around 32 Polytechnics in Malaysia and almost are using conventional methods. The number is considered very big indicating that the use of modern Information and Communication Technology (ICT) is still very limited compared to other institutions of higher learning in Malaysia. The overall findings of this research indicated; poor service delivery, inadequate financial, poor maintenance planning and maintenance backlogs. There is also need to overcome less man power competencies of maintenance management practices which existed with all eight Polytechnics. The proposed system is intended to be used for maintenance management practices at Malaysian Polytechnics in order to provide high-quality of building facility with safe and healthy environments.

• 한국IT서비스학회지
• /
• 제9권4호
• /
• pp.169-185
• /
• 2010

According to software growth, also software maintenance has been continuously improving. In addition, the existing concept of software maintenance process demands operational management and improvement of service task. However, when we perform maintenance task, we have several constraints about applying service based requirement to system. Therefore, in order to solve these problems, we need a study of task of process for service based maintenance. In this paper, we propose a Service based Software Maintenance Process. Proposed process based on MaRMI-RE standard for software development and maintenance and compares it with the service based representative standards. In a related works, we study activity of ITIL and identify activities and tasks for maintenance. After this, identified activities and tasks compare with activities of MaRMI-RE. And then, we derive activities and tasks of a Service based Software Maintenance Process. Finally, we validate a result by comparing the proposed process with a general service operational process.

• 한국군사과학기술학회지
• /
• 제24권4호
• /
• pp.449-456
• /
• 2021

Impatience characteristics are an important factor to be considered in the defense field, which is sensitive to time, but there are not many cases applied. In addition, due to the difficulty of analysis that must consider various probabilistic factors (breakdown/maintenance distribution, impatience characteristics, etc.), military decision makers consider only simple data (number of occurrences per year, maintenance time, etc.) Therefore, in this study, a model capable of analyzing the performance of the emergency maintenance system for determining the appropriate size and organization of military and civilian maintenance personnel was presented in consideration of impatience characteristics and probabilistic factors. And through numerical analysis, the appropriate size of the military and civilian emergency maintenance teams was analyzed. This study is significant in that it can improve readiness of operational power and prevent waste of defense budget through efficient operation of the military's emergency maintenance system.

• 국제학술발표논문집
• /
• The 1th International Conference on Construction Engineering and Project Management
• /
• pp.1203-1207
• /
• 2005

At this point of time that it is required to improve educational environment and the function of educational facilities as well as interests on educational facility business is increasing, it is actual situation that unsystematic maintenance of educational facility is not being able to cope with the change caused by introducing the 7^th curriculum. Also, in spite of enormous career in maintenance work, the function is not properly performed because of unsystematic management. In case of educational facility manager, he parallels performing general administrative work and facilities maintenance work not as a maintenance expert but as a member of administration office. So there are difficulties in performing maintenance work, and systematic maintenance work cannot be expected because of lacking maintenance manual. Therefore, in this research, I would like to investigate and analyze the status of educational facilities and to elicit the point of issue as a basic research to save maintenance expenses and to make pleasant educational environment.

• 한국컴퓨터정보학회논문지
• /
• 제22권12호
• /
• pp.145-153
• /
• 2017

Systemic management is required at each phase of the C4I system life cycle to achieve information advantage in the battlefield through stable operation of the C4I system under the NCOE. In particular, the maintenance phase is the longest period of the C4I system life cycle, and it is easy to utilize and analyze data such as faults that occur during system operation. However, according to the previous research, the maintenance is evaluated as a phase in which the definition and management of comprehensive indicators are insufficient compared to other phase. In this paper, we propose the method of C4I Maintenance Priority decision using Maintenance metric. As a result of modifying the Naval Tactical C4I System's preventive maintenance cycle according to the priority, the total number of faults is reduced and the maintenance efficiency is improved.

• 국제학술발표논문집
• /
• The 1th International Conference on Construction Engineering and Project Management
• /
• pp.1138-1143
• /
• 2005

As the importance of building maintenance is being emphasized, studies regarding the efficient building maintenance focus on the evaluation of the maintenance plan, implementation and its cost only while the evaluation of the maintenance performance is nearly ignored. At this point when the importance is placed on the performance design we need to have methods to improve maintenance performance of the buildings in Design Phase. The purpose of this study was to set the design evaluation items to improve the maintenance performance of the buildings. Through the review of the existing literature, we set the concept of the maintenance performance and suggested evaluation items to evaluate the maintenance performance through the analysis of domestic and overseas certification and design guidelines.