• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제50권5호
• /
• pp.207-210
• /
• 2001

In this paper, the Flexible information display was implemented uing AC powder electroluminescent device. ZnS:Cu and $BaTiO_3$ were used as a phosphor and dielectric respectively. The growth of phosphor and dielectric layer was performed with screen printing. The flexible information display in this paper was categorized as following; EL display, driving circuit, software for driving. EL spectrum and brightness was measured as the device properties.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권1호
• /
• pp.159-161
• /
• 2007

We fabricated flexible OTFT-backplanes for the electrophoretic display(EPD). The OTFTs employed bottom contact structure on PEN substrate and used the cross-linked polyvinylphenol for gate insulator, pentacene for active layer. Especially, we used PVA/Acryl double layers for passivation of backplane as well as for pixel dielectric layer between backplane and EPD panel. The OTFT-EPD panel worked successfully anddemonstrated to display some patterns.

• Journal of the Optical Society of Korea
• /
• 제17권2호
• /
• pp.168-171
• /
• 2013

A reflective flexible display was fabricated by placing a thermochromic pigment on a polyethylene naphthalate (PEN) substrate coated with an indium tin oxide (ITO) film, and its thermo-optical characteristics were investigated. The reflective thermochromic display showed good image quality with a reflectance of approximately 65%. As a flexible display, the display showed reliability without damage to the image even after the display was bent strongly. The reflective display cell exhibits continuously the gray level according to the temperature controlled by applied voltage. This low cost display is expected be used in outdoor poster applications where information needs to be presented clearly.

• 디지털융복합연구
• /
• 제16권1호
• /
• pp.287-292
• /
• 2018

ICT(Information and Communications Technologies)기술이 중심이 되는 디지털 멀티미디어 환경은 우리의 상상을 현실의 다양한 경험으로 바꾸어주었다. 고도의 정보화 사회에서 요구되는 인간과 기계의 커뮤니케이션 수단으로 탄생한 플렉시블 디스플레이(Flexible display)는 시장을 다변화시키고, 사물인터넷등과의 연계를 통해 새로운 시장을 창출해 내고 있다. 플렉시블 디스플레이의 인터페이스는 입력 또는 출력의 결과로 물리적 형태를 제공할 수 있기 때문에 사용자 중심의 인터페이스 디자인이 무엇보다 중요하다. 이에 본 논문의 연구자는 플렉시블 디스플레이의 사용자 조작에 따른 물리적 변형과 특성에 대해 문헌과 사례조사를 통해 연구했다. 연구 결과 사용자 경험을 위한 플렉시블 디스플레이 인터페이스 디자인 가이드라인을 다음과 같이 제시한다. 첫째, 다양한 형태의 디스플레이 환경에서 사용자에게 필요한 기능을 최대한 제공할 수 있도록 디자인되어야 한다. 둘째, 인터페이스를 활용함에 있어서 다중 사용자의 시야각에 방해 요소는 제거되어야 한다. 셋째 터치와 접촉 이외에 플렉시블 디스플레이에서 가능한 사용자의 모든 조작행위가 고려되어야 한다. 넷째 플렉시블 디스플레이의 가변적 상황에 따라 사용자 경험을 위한 인터페이스디자인도 달라져야 한다. 위 가이드라인은 향후 다양한 플렉시블 디스플레이가 출시된 후, 실증적인 사용자 경험에 대한 분석과 연구에 도움이 될 것으로 기대된다.

• 로봇학회논문지
• /
• 제8권3호
• /
• pp.156-163
• /
• 2013

This paper describes a flexible visuo-haptic display module. We have developed a flexible electro-active polymer (EAP) actuator and a thin flexible visual display with $3{\times}3$ array configuration via polymer technology. The flexible actuator consists of nine EAP cells vertically moving in response to change in their thickness. The flexible display uses polymer based optical waveguide allowing light to scatter only at specific area. The display film is transparent and identically designed to the array pattern to fit for the arrangement of actuator cells. A pressure sensor is installed under the integrated module. The performance of the actuator is proved to be sufficient for satisfying perceivable range of human touch sense. The integrated system can provide interactive haptic feedback such as key pressing, contact vibration sensations, and etc. in accordance with user input.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.1337-1340
• /
• 2008

Since 2006, the Industrial Technology Research Institute and the University of Cincinnati have been jointly exploring approaches for high brightness flexible electrowetting displays (EWDs). Recently, ITRI demonstrated for the $1^{st}$ time a 6" AM-EWD reflective display panel. To create flexible AM-EWDs, Cincinnati has developed low-temperature processing and improved pixel structures.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.305-308
• /
• 2006

Advanced mobile communication devices require a bright, high information content display in a small, light-weight, low power consumption package. For portable applications flexible (or conformable) and rugged displays will be the future. In this paper we outline our progress towards developing such a low power consumption active-matrix flexible OLED $(FOLED^{TM})$ display. We demonstrate full color 100 ppi QVGA active matrix OLED displays on flexible stainless steel substrates. Our work in this area is focused on integrating three critical enabling technologies. The first technology component is based on UDC's high efficiency long-lived phosphorescent OLED $(PHOLED^{TM})$ device technology, which has now been commercially demonstrated as meeting the low power consumption performance requirements for mobile display applications. Secondly, is the development of flexible active-matrix backplanes, and for this our team are employing PARC's Excimer Laser Annealed (ELA) poly-Si TFTs formed on metal foil substrates as this approach represents an attractive alternative to fabricating poly-Si TFTs on plastic for the realization of first generation flexible active matrix OLED displays. Unlike most plastics, metal foil substrates can withstand a large thermal load and do not require a moisture and oxygen permeation barrier. Thirdly, the key to reliable operation is to ensure that the organic materials are fully encapsulated in a package designed for repetitive flexing, and in this device we employ a multilayer thin film Barix encapsulation technology in collaboration with Vitex systems. Drive electronics and mechanical packaging are provided by L3 Displays.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.I
• /
• pp.484-487
• /
• 2005

In order to find out LC cell spacing method suitable for flexible cholesteric LCDs with high mechanical stability, we carried out bending and mechanical shock tests by using various spacing techniques: bead spacer, photo spacer, polymer wall with bead spacer and polymer wall with photo spacer. As a result, it was found that the spacing method using polymer wall incorporated with photo spacer is the best for flexible cholesteric LCDs in terms of mechanical stability. The investigation is discussed in detail.

• 반도체디스플레이기술학회지
• /
• 제21권4호
• /
• pp.1-5
• /
• 2022

We presented a micro hemi-sphere structure flexible film to improve the external quantum efficiency (EQE) in OLEDs. The micro hemi-sphere flexible film was fabricated with breath figure (BF) method and replica process. At 45 mg/mL of concentration, the size of the hemi-spheres was approximately 6.2 ㎛ were obtained which are the most circular shape. So, it was possible to yield the best performance with an improvement of 33 % in the EQE and the widest viewing angle ranging from 0° to 70°. As a result, the hemi-sphere film's size and distribution seem to play important roles in enhancing the EQE in OLEDs. Furthermore, the flexible hemi-sphere film based on polymeric materials could offer an effective, large-scale, mass-produced product and a simple process and approach to achieve high efficiency in flexible OLEDs.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.179-181
• /
• 2008

Major display equipment suppliers introduced equipment using inkjets for manufacturing steps such as printing polyimide alignment layers and color filters. This paper discusses how inkjets can be used in the development of flexible displays and materials printing systems designed to meet the challenges of fluids and process development.