• Radiation Oncology Journal
• /
• v.15 no.4
• /
• pp.287-296
• /
• 1997

Purpose : This is study of whether 3-D conformal radiotherapy for carcino-mas of the ethmoid sinus were better than those treated with conventional 2-D plan, Materials and Methods : The 3-D conformal treatment Plans were compared with conventional 2-D plans in 4 patients with malignancy of the ethmoid sinus. Isodose distribution, dose statistics, and dose volume histogram of the planning target volume were used to evaluate differences between 2-D and 3-D plans. In addition. the risk of radiation exposure of surrounding normal critical organs are evaluated by means of point dose calculation and dose volume histogram. Results : 3-D conformal treatment plans for each patient that the better tumor coverages by the planning target volume with improved dose homo-geneity, compared to 2-D conventional treatment Plans in the same Patient. On the other hand, the radiation dose distributions to the surrounding nor-mal tissue organs, such as the orbit and optic nerves are not significantly reduced with our technique, but a substantial sparing in the brain stem and optic chiasm for each patient. Conclusion : Our findings represented the potential advantage of 3-D treatment planning for dose homogeniety as well as sparing of the normal tissue surrounding the tumor. However, further investigational studies are required to define the clinical benefit.

• Korean Journal of Weed Science
• /
• v.18 no.3
• /
• pp.179-185
• /
• 1998

This study was conducted to investigate changes in weed occurrence and dominance as affected by seeding dates in water seeded rice paddy under field following two years of no-tillage condition. The pre-emergence weeds in no-tillage paddy were controlled by glyphosate application at 7 days before seeding. The rice seeds were seeded on April 20, May 10 and May 30, respectively with 40kg/ha of seeding rate. The weed species in the paddy occurred included three species (Echinochloa cursgalli, Aneilma keisak, Ottelia alismoides) of annual weed, one species (Alopecurus aequalis) of biennial weed and five species (Eleocharis kuroguwai, Leersia japonica, Sagittaria pygmaea, Sagittaria trifolia, Potamogeton distinctus) of perennial weed respectively. Aneilma keisak was found to be dorminant on April 20 and May 10 but Eleocharis kuroguwai on May 30 based on number of weeds. The number and dry weight of weeds occurred were higher on May 10 as compared to in other seeding dates, while proportion of perennial weeds increased as the seeding date was delayed. In particular, weed dorminance varied marketly with seeding date. The Simpson's indices were 0.736 on April 20, 0.261 on May 10 and 0.281 on May 30, respectively.

• Korean Journal of Medicinal Crop Science
• /
• v.9 no.2
• /
• pp.156-165
• /
• 2001

Exogeneous application of pokeweed antiviral protein (PAP), a ribosomal-inacivating protein in the cell wall of Phytolacca americana (pokeweed) protects heterologous plants from viral and fungal infection. A cDNA clone of PAP introduced into Scrophularia buergeriana Miquel by thransformation with Agrobacterium tumefaciences. For plant transformation, explants were precultured on shoot induction medium without kanamycin for 2-5 day, and then they were cocultured with Agrobacterium for 10 minutes. The explants were placed on co culture medium in dark condition, $28^{\circ}C$ for 2days. After explants were washed in MS liquid medium, they were transferred into selection medium including kanamycin 50mg/L (MS salts+1mg/ l BAP+2mg/ l TDZ+0,2mg/ l NAA+MS vitamin+3% sucrose+0.8% agar, pH5.8). From PCR analysis, NPT II band was confirmed in transgenic plant genome and showed resistance against fungi in antifungal activity test. Micro assay to which protein extracted from transgenic line were added, revealed hyphae growth inhibition and no spore germination at high concentration. The characteristics of inhibited hyphae was represented transparent and thin. Expression of PAP in transgenic plants offers the possibility of developing resistance to viral and fungal infection.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.37 no.5
• /
• pp.815-825
• /
• 2017

Visibility of lane marking is impaired at night or in the rain, which thereby threatens traffic safety. Recently, various studies and technologies have been developed to improve lane marking visibility, such as the extension of lane marking life expectancy (up to 1.5 times), improvement of lane marking equipment productivity, improvement of lane marking visibility by applying phosphorescent material mixed paint. Cost-benefit analysis was performed with considering various benefit items that can be expected. About 45% of traffic accidents would be prevented by improving lane marking visibility. Additionally, accident reduction benefit and traffic congestion reduction benefit were calculated as much as 246 billion KRW per year and 12 billion KRW per year, respectively, by reducing repaint cycle due to enhanced durability. 45 billion KRW per year is expected to reduced with improved lane detection performance of autonomous vehicle. Meanwhile, total increased cost when introducing phosphorescent material mixed paint to 91,195km of nationwide road is identified as 1922 billion KRW per year. However, economic feasibility could not be secured with 0.16 of cost-benefit ratio when applied to the road network as a whole. In case of "Accident Hot Spot" analyzing section window (400m), one or more fatality or two or more injured (one or more injured in case of less than 2 lanes per direction) per year were caused by pavement marking related accident, economic feasibility was secured. In detail, 3.91 of cost-benefit ratio is estimated with comparison of the installation cost for 5,697 of accident hot spot and accident reduction benefit. Some limitations and future research agenda have also been discussed.

• Journal of The Korean Association For Science Education
• /
• v.23 no.1
• /
• pp.35-46
• /
• 2003

Problem solving ability, having been thought as one of the most important goals of science education is also a primary task for the current education. Indeed, the students' problem solving ability has shown almost no actual progress, despite our long accumulated science education. Under this circumstances, cooperative learning, a way to grow students' positive inter-dependence and problem solving ability in the basis of their active participation and discussion, was proposed as an effective teaching method. But, results have not consistently shown the advantage of cooperative learning over traditional learning for promoting academic achievement in science. Studies have consistently shown greater effectiveness on affective aspects. But, relatively few have focused on biology in Korea. The purpose of this study was to examine the effects of cooperative learning on the achievement and attitude of high school biology students. The pretest-posttest control group design was applied. The sample consisted of 50 11th-grade female students in experimental group(cooperative learning Student Team Achievement Division model) and 50 students in control group(traditional learning). Students in both groups recieved identical content instruction on the unit 'II. Methabolism'. These groups were treated for 13 hours during 5 weeks. Achievement data were collected using a 24-item multiple-choice test(content validity= .85). Science attitude was measured by an instrument which adapted by Kim In Hee(1994). The instrument(Cronbach $\alpha$=.89) included 40 items in four subscales: attitude toward science, social meaning of science, attitude toward science class, and scientific attitude. An analysis of covariance (ANCOVA) was used as the data analysis procedure. For the achievement data, no significant difference exists between the cooperative and traditional groups (p> .05). But, cooperative learning was effective in low-ability students(p < .05). For the science learning attitude data, cooperative learning was more effective than the traditional one(p< .05). Students in the cooperative group acheived better than those in traditional one especially in the subscale of attitude toward science class. There was no meaningful difference of the two methods in both high and average ability students, while cooperative learning was more effective than the traditional one in low ability students(p<.05).

• Food Science and Preservation
• /
• v.19 no.5
• /
• pp.633-638
• /
• 2012

The aim of this study was to investigate the growth of aerobic bacteria in fresh-cut salad during short-term temperature abuse ($4{\sim}30^{\circ}C$temperature for 1, 2, and 3 h) for 72 h and to develop predictive models for the growth of total viable cells (TVC) based on Predictive food microbiology (PFM). The tool that was used, Pathogen Modeling program (PMP 7.0), predicts the growth of Aeromonas hydrophila (broth Culture, aerobic) at pH 5.6, NaCl 2.5%, and sodium nitrite 150 ppm for 72 h. Linear models through linear regression analysis; DMFit program were created based on the results obtained at 5, 10, 20, and $30^{\circ}C$ for 72 h ($r^2$ >0.9). Secondary models for the growth rate and lag time, as a function of storage temperature, were developed using the polynomial model. The initial contamination level of fresh-cut salad was 5.6 log CFU/mL of TVC during 72 h storage, and the growth rate of TVC was shown to be 0.020~1.083 CFU/mL/h ($r^2$ >0.9). Also, the growth tendency of TVC was similar to that of PMP (grow rate: 0.017~0.235 CFU/mL/h; $r^2=0.994{\sim}1.000$). The predicted shelf life with PMP was 24.1~626.5 h, and the estimated shelf life of the fresh-cut salads with short-term temperature abuse was 15.6~31.1 h. The predicted shelf life was more than two times the observed one. This result indicates a 'fail safe' model. It can be taken to a ludicrous extreme by adopting a model that always predicts that a pathogenic microorganism will grow even under conditions so strict as to be actually impossible.

• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.4
• /
• pp.609-617
• /
• 2000

This study is aimed at investigating an effect of HCl gas on selective reduction of NOx over a CuHM and $V_2O_5-WO_3/TiO_2$ catalyst. SCR process is the most effective method to remove NOx, but catalyst can be deactivated by the acidic gas such as HCl gas which is also included in flue gas from the incinerator. In dry condition of flue gas, the CuHM catalyst treated by HCl gas has shown higher NO removal activity than the fresh catalyst. The activity of the catalyst can be restored by treating at $500^{\circ}C$. On the contrary. $V_2O_5-WO_3/TiO_2$ catalyst is obviously deactivated by HCl and the deactivation increases in proportion to the concentration of HCl gas. The deactivated catalyst is not restored to it's original activity by heat treatment for regeneration. In wet flue gas stream, the CuHM catalyst has shown lower activity than fresh catalyst and $V_2O_5-WO_3/TiO_2$ catalyst was severely deactivated by HCl treatment. The activity loss of catalysts are mainly due to the decrease of Br$\ddot{o}$nsted acid site on the catalyst surface by $NH_3$ TPD. The change of BET surface area of CuHM catalyst after the reaction isn't observed but $V_2O_5-WO_3/TiO_2$ catalyst is observed. The amount of $Cu^{{+}{+}}$ and $V_2O_5$ is decreased after the reaction. From these results, it is expected that CuHM catalyst should be better than $V_2O_5-WO_3/TiO_2$ catalyst for its application to the incineration of flue gas.

• Journal of the Korean Applied Science and Technology
• /
• v.33 no.1
• /
• pp.143-154
• /
• 2016

This study is related to develop a snail extract through a snail secondary fermentation process, getting anti-aging activity with healthy and beauty skin care scientific applications. In order to obtain a primary fermentation was incubated with Hericium erinaceus mycelium. Through the secondary fermentation process using Leuconostoc mesenteroides, was deeply described a total process of obtaining second fermented extract using snail body. Mycelium is applied in this study was extracted using Hericium erinaceus mycelium and Leuconostoc mesenteroides. The final yield of the extract was 62 wt%. Experimental results of secondary fermentation snail extract were contained with 32 wt% water, 31.5 wt% total amino acid protein, 15.7 wt% polysaccharide, 12.3 wt% fatty acid and others 8.5 wt%. In addition, in order to study about skin beauty care and anti-aging activity, we evaluated antioxidant activity with DPPH, elastin enzyme (elastase) inhibitory activity, tyrosinase inhibition rate, collagen synthetic function, fibroblast synthetic activity. First; anti-oxidative activity of secondary fermentation snail extract (IC50%) was spent with 7.27 mg/mL, control samples were spent with green tea extract was 11.8 mg/mL, common snails extract was 15.7 mg/mL, DL-a-tocopherol was 9.25 mg/mL respectively. Second; elastin enzyme inhibitory activity of secondary fermentation snail extract (IC50%) was spent with 32.5 mg/mL, control samples were also spent with green tea extract was 45.9 mg/mL, general snail extract was 67.7 mg/mL. Third; tyrosinase inhibitory activity of secondary fermentation snail extract (IC50%) was spent with 140.3 mg/mL, control samples were also spent with green tea extract was 250.7 mg/mL, general snails extract was 389.5 mg/mL, niacineamide was 125.9 mg/mL. Forth; fibroblast synthetic activity of secondary fermentation snail extract was increased with 125.6%, control samples were also spent with green tea extract was 98.9%, general snails extract was 109.5%, niacineamide was 125.9 mg/mL, DL-a-tocopherol was 96.2%. Fifth; collagen synthetic activity of secondary fermentation snail extract was increased with 118%, control samples were also spent with green tea extract was 87.3%, general snails extract was 93.2%, adenosine was 127.9%. In conclusion, on the basis of this study, in the future it is expected to be applied to the skin beauty care application and development of Korean style cosmetic products.

• Journal of the Korean Applied Science and Technology
• /
• v.33 no.1
• /
• pp.1-12
• /
• 2016

This study is to make the liquid crystalline structure using sucrose distearate (Sucro-DS) emulsifier to create the hydrophilic type oil-in-water (O/W) emulsion, the droplets of the emulsion having a structure of a multi-lamellar structure. We have studied the physicochemical properties of Sucro-DS using those techniques. And it has been studied in the emulsion performance. In order to form the liquid crystalline structure applying 3 wt% of Sucro-DS, 5 wt% of glycerin, 5 wt% of squalane, 5 wt% of capric/caprylic triglyceride, 3wt% of cetostearyl alcohol, 1wt% of glyceryl mono-stearate, 78 wt% of pure water in mixture having the lamellar structure of stable multi-layer system was found to formed. By applying them, they were described how to create an unstable active material encapsulated cream. Further, the moisturizing cream was studied using this technique. It reported the results to the skin improvement effect by the human clinical trials. The pH range to produce a stable liquid crystal phase using a Sucro-DS was maintained in 5.2~7.5. In order to increase the stability of the liquid crystal, it was when behenyl alcohol containing 3 wt%, the hardness at this time was 13 kg/mm,min. Viscosity of the same amount was 25,000mPas/min. After a test for the effects of the emulsions, the concentration of 6 wt% Sucro-DS is that was appropriate, the particle size of the liquid crystal was 4~6mm. It was observed through a microscope analysis, reliability of the liquid crystal changes for 3 months was found to get stable at each $4^{\circ}C$, $25^{\circ}C$ and $45^{\circ}C$. In clinical trial test, before applying a moisturizing effect it was $13.4{\pm}7%$. Moisturizing cream liquid crystal was not formed in $14.5{\pm}5%$. Therefore, applying than ever before could see the moisture about 8.2% was improved. On the other hand, it was the moisturizing effect of the liquid cream is $19.2{\pm}7%$. The results showed that 43.3% improvement than that previously used. Applications fields, Sucro-DS emulsifier used liquid cream, lotion, eye cream and a variety of formulations can be developed, as well as the cosmetics industry is expected to be wide fields in the application of the external preparation for skin emulsion technology in the pharmaceutical industry and pharmaceutical industry.

• Geophysics and Geophysical Exploration
• /
• v.10 no.3
• /
• pp.191-202
• /
• 2007

To identify the detailed attenuation structure in the southern Korean Peninsula, a numerical test was conducted for the Q tomography inversion to be applied to the accumulated dataset until 2005. In particular, the stochastic pointsource ground-motion model (STGM model; Boore, 2003) was adopted for the 2D Q tomography inversion for direct application to simulating the strong ground-motion. Simultaneous inversion of the STGM model parameters with a regional single Q model was performed to evaluate the source and site effects which were necessary to generate an artificial dataset for the numerical test. The artificial dataset consists of simulated Fourier spectra that resemble the real data in the magnitude-distance-frequency-error distribution except replacement of the regional single Q model with a checkerboard type of high and low values of laterally varying Q models. The total number of Q blocks used for the checkerboard test was 75 (grid size of $35{\times}44km^2$ for Q blocks); Q functional form of $Q_0f^{\eta}$ ($Q_0$=100 or 500, 0.0 < ${\eta}$ < 1.0) was assigned to each Q block for the checkerboard test. The checkerboard test has been implemented in three steps. At the first step, the initial values of Q-values for 75 blocks were estimated. At the second step, the site amplification function was estimated by using the initial guess of A(f) which is the mean site amplification functions (Yun and Suh, 2007) for the site class. The last step is to invert the tomographic Q-values of 75 blocks based on the results of the first and second steps. As a result of the checkerboard test, it was demonstrated that Q-values could be robustly estimated by using the 2D Q tomography inversion method even in the presence of perturbed source and site effects from the true input model.