• 한국정밀공학회지
• /
• 제21권12호
• /
• pp.37-43
• /
• 2004

The performance of magnetic abrasive finishing fur surface is evaluated by the characteristic curve. The characteristic curve is generated by experiment in surface finishing. For experiment, new magnetic inductor is designed and manufactured. 15 kinds of powders are provided to find the relationship between powder characteristic and finishing performance. As powder, Fe-TiC. Polymer-TiC and Fe-NbC are used with different size. The size of abrasives and location are also important factor for the performance. From characteristic curve, two index are obtained, which specify the initial finishing performance and endurance of finishing performance. It is proved that the performance index can be applied to select proper powder for efficient deburring. It is shown that the characteristic curve can be used as good tools for evaluating powder performance in surface finishing and deburring.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.148-153
• /
• 2007

The effect of silicon carbide (SiC) and graphite fillers incorporation on the abrasive wear behaviour of glass-vinyl ester (G-V) composites have been investigated. The three-body abrasive wear behaviour was assessed by rubber wheel abrasion tests (RWAT). The worn surfaces were examined using scanning electron microscopy (SEM). The addition of SiC and graphite fillers in G-V composite improves the abrasion resistance under different loads/abrading distances. The SEM studies indicate the reasons for failure of composites and influencing parameters.

• 한국정밀공학회지
• /
• 제15권2호
• /
• pp.14-20
• /
• 1998

Automatic finishing process requires the development of high efficient and precision abrasive machining method for dies and molds. This study describes the evaluation of the finishing characteristics, such as surfrace roughness, topography and material removal depth of the electrolytic mixed abrasive machining methods. Experimental setup is composed of 3 axis machining center, a newly developed finishing attachment with constant pressure, electrode and electrolytic bath. Finally, we achieved a successful result that surface roughness is $0.01\mu$m Ra and material removal depth is $120\mu$m using electrolytic(0.8A. 30V) mixed abrasive (#400 CBN, #320 SiC) machining method.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 춘계학술대회 논문집
• /
• pp.937-941
• /
• 1997

Utomatic finishing process requires the development of high efficient and precision abrasive machining method for die and molds. This study describes the evaluation of the finishing characteristics, such as sufrace roughness, topography and material removal depth, of the electrolytic chemical mixed abrasive machining method. Experimental setup is composed of 3 axis machining center, a newly developed finishing attachment with constant pressure, electrode and electrolytic bath. Finally, we achieved a successful result that surface roughness is 0.01 .mu. m Ra and material removal depth is 145 .mu. m after 100 times repeat-finishing using electrolytic (0.8A,30V) mixed abrasive (#400 CBN, #320 Sic) machining method.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 추계학술대회 논문집
• /
• pp.206-209
• /
• 2002

The fixed abrasive pad(FAP) has been introduced in chemical mechanical polishing(CMP) field recently. In comparison with the general CMP which uses the slurry including abrasives, FAP takes advantage of planarity. resulting from decreasing pattern selectivity and defects such as dishing due to the reduction of abrasive concentration especially. This paper introduces the manufacturing technique of $Al_2$O$_3$-FAP using hydrophilic polymers with swelling characteristic in water and explains the self.texturing phenomenon. It also focuses on the chemical effects on tungsten film and the FAP is evaluated on the removal rate as a function of chemicals such as oxidizer, catalyst, and acid. The removal rate is achieved up to 1000A1min as about 70 percents of the general one. In the future. the research has a plan of the advanced FAP and chemicals in tungsten CMP considering micro-scratch, life-time, and within wafer non-uniformity.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part2
• /
• pp.1091-1092
• /
• 2006

Silicon nitride - silicon carbide composite was developed by using an abrasive SiC powders as a raw material. The composites were prepared by mixing abrasive SiC powder with silicon, pressing and sintering at $1400^{\circ}C$ under nitrogen atmosphere in atmosphere controlled vacuum furnace. The proportion of silicon in the initial mixtures varied from 20 to 50 wt%. After sintering, crystalline phases and microstructure were characterized. All composites consisted of ${\alpha}-Si_3N_4$ and ${\beta}-Si_3N_4$ as the bonding phases in SiC matrix. Their physical and mechanical properties were also determined. It was found that the density of the obtained composites increased with an increase in the $Si_3N_4$ content formed in the reaction.

• 한국기계가공학회지
• /
• 제15권2호
• /
• pp.9-15
• /
• 2016

The dynamics of gas-particle flow from a supersonic abrasive blasting nozzle have been studied by 1-D analytical calculation, including wall friction effects inside the nozzle. The developed code in the present study shows a satisfactory agreement with the other study's results. By utilizing the code, the redesign and optimization of the inner contour of a commercial abrasive blasting nozzle were carried out, and it was found that the redesigned nozzle in the present study can produce faster particle velocities at the nozzle exit by up to 22% compared with the original commercial nozzle.

• 한국공작기계학회논문집
• /
• 제17권4호
• /
• pp.35-41
• /
• 2008

R/In order to satisfy the customer's variant needs for a product quality in recent years, a demand for developing higher precision machining technologies in a lot of application areas such as automobile, cellular phone and semiconductor has been increased more and more. Magnetic abrasive polishing(MAP) process is one of these precision technologies. In this study, to verify the parameters' effect of the MAP process on the surface roughness improvement of the plane and the inclined workpiece, well planned experiments which was called the design of experiments were carried out. Considered polishing factors were spindle speed, supplied current, abrasive type and working gap between the workpiece and the solid tool. As a result, it was seen that the supplied current and the working gap greatly affected the surface roughness improvement.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1997년도 추계학술대회 논문집
• /
• pp.190-195
• /
• 1997

The requirement of precision products about difficult-to-cut materials such as Cu and Aluminum alloy is becoming more and more. Because of soft materials, the exist narrow groves on surface are difficult to gotten off even on the polishing stage. It has been proved that Magnetic-Electrolytic-Abrasive Polishing (MEAP) is a efficient method to resolve this problem by using the nonwoven-abrasive pads together [1, 2]. In this study, through the experiments, their machining properties of newly developer polishing material of SiC, Al2O3 and diamond nonwoven abrasive pads have been proved. Through the experiments, the optimal machining conditions on larger cylinder shape workpiece of Cu and Aluminium alloy have been found, through the Taguchi[3] method the optimal machining conditions can be selected.

• 수산해양기술연구
• /
• 제47권3호
• /
• pp.267-272
• /
• 2011

The behavior of abrasive wear on counterpart roughness of glass fiber reinforcement polyurethane resin (GF/PUR) composites were investigated at ambient temperature by pin-on-disc friction test. The friction coefficient, cumulative wear volume and surface roughness of these materials against SiC abrasive paper were determined experimentally. The major failure mechanisms were lapping layers, ploughing, delamination, deformation of resin and cracking by scanning electric microscopy (SEM) photograph of the tested surface. As increasing the counterpart roughness the GF/PUR composites indicated higher friction coefficient. The surface roughness of the GF/PUR composites was increased as the sliding velocity was higher and the counterpart roughness was rougher in wear test.