• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2007.04a
• /
• pp.5-8
• /
• 2007

Selection of proper root barrier as destination part of greening is very important in Root penetration resistance plan. To select proper root barrier, it need to understand composition of greening part, size, kind of plant, connection with waterproofing layer. In this point of view, we have establish greening on the roof or concrete structure, not been understand the structural mechanism. It means that we misunderstood about purpose of greening and using it. So, chosen materials and construction method was not proper for greening, it caused water leakage and decrease performance of concrete structure. Therefore, we examine the practical use of copper sheet considering environmental condition for green roof. Watertightness by water of greening part, root penetration resistance test by root penetration, bacteria resistance by must or bacteria in soil, chemical resistance by rain and chemical agent of fertilizer, and load resistance by soil depth, sire of plant. These suggested test methods could be referred as guideline to test in green roof system because of not exist any performance appraisal guideline or standard. Consequently, it should be analysis as technical and institutional subdividing test methods and it need to study constantly as varied angles.

• Journal of Acupuncture Research
• /
• v.22 no.5
• /
• pp.175-182
• /
• 2005

Objectives : There are little reports on treatment of shoulder impingement syndrome with acute bursitis and supraspinatus tendinopathy in traditional Korean Medicine. We suggest oriental treatment for pain relief and better movement of shoulder impingement. Methods : A -Shi Point, Sa-am acupuncture, ohjuksan-gamipang, seokyongtang-gamipang were used to treat shoulder pain. we evaluated the patient through VAS(Visual Analogue Scale) daily and Physical Examinations. Results : After 5 days of treatment, shoulder pain was decreased from VAS 7.5 to VAS 2 and After 3 weeks, the patient showed nearly full ROM(range of movement). Conclusion : In shoulder impingement syndrome, oriental treatment is good method for pain relief and better movement.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.35 no.7
• /
• pp.640-646
• /
• 2007

Actuator-induced disturbance is one of the crucial factors of spacecraft attitude pointing and stability in fine attitude control problems. The control moment gyros (CMGs) are known as very attractive actuators from the point of high power and low weight. In order to develop a CMG as an actuator for fine controls, CMG-induced disturbances should be analyzed. Therefore, this paper aims to develop an analytic model and predict the effect of disturbances of CMGs by assuming static and dynamic imbalances. The proposed model is induced by the Lagrangian method on the basis of the small signal assumption.

• The Journal of Korean Medicine
• /
• v.30 no.1
• /
• pp.163-172
• /
• 2009

Objectives: The purpose of this study is to report the improvement after oriental medical treatment of partial tear of supraspinatus tendon. Method: We treated 2 patients having shoulder pain due to partial tear of supraspinatus tendon with Oriental medical treatment, including Sa-am acupuncture DaeJang-Jeonggyeok, A-shi point(阿是穴) and herbal medicine. We checked visual analog scale (VAS) score and range of movement (ROM). Results: We treated shoulder pain. Thereafter ROM improved and V AS score dropped to the level of 2 to 4 points from 10 points at onset. Conclusion: This report shows Oriental medical treatment has effectiveness on partial tear of supraspinatus tendon. Follow-up study is needed.

• Steel and Composite Structures
• /
• v.13 no.2
• /
• pp.123-137
• /
• 2012

Steel plate-masonry composite structure is a newly-developed type of structural technique applicable to existing masonry buildings by which the load-bearing walls can be removed for large spaces. This kind of structure has been used in practice for its several advantages, but experimental investigation on its elements is nearly unavailable in existing literature. This paper presents an experimental study on the flexural behaviour of four steel plate-masonry composite beams loaded by four-point bending. Test results indicate that failure of the tested beams always starts from the local buckling of steel plate, and that the tested beams can satisfy the requirement of service limit state. In addition, the assumption of plane section is still remained for steel plate prior to local buckling or steel yielding. By comparative analyses, it was also verified that the working performance of the beam is influenced by the cross-section of steel plate, which can be efficiently enhanced by epoxy adhesive rather than cement mortar or nothing at all. Besides, it was also found that the contribution of the encased masonry to the flexural capacity of the composite beam cannot be ignored when the beam is injected with epoxy adhesive.

• Journal of the Korean Geographical Society
• /
• v.29 no.1
• /
• pp.65-83
• /
• 1994

Sevaral problems of administrative area sysem in Korea have been brought up for a long time. Because its frame has remained since Chosun and Japanese colonial period in spite of changing local administrative environment in accordance with rapid industrialization and urbanization. Recent reform of city (Shi)- county (Gun) integration is derived from this argument. But problems which permeate deeply overall system cannot be solved by partial reorganization of Shi-Gun. They may be rationalized only through the reform of the whole system. The aims of this study are to analyze problems of administrative area system entirelr and to discuss the direction of its reform from that point of view. Major problems of administrative area system are summed up into the followings. Firstly, it is found that administrative hierarchies are too many levels. Contemporary administrative hierarchical structure is 4 levels: regional autonomous government (Tukpyolshi, Jik'halshi, Do), local autonomous government (Shi, Gun), two leveis of auxiliary administrative area (Up, Myun and Ri). These hierarchies were established in late period of Chosun which transportation was undeveloped and residential activity space was confined. But today developing transportion and expanding sphere of life don't need administrative hierarchical structurl with many levels. Besides developing administrative technology reduces administrative space by degrees. Many levels of contemporary administrative hierarchical structure are main factor of administrative inefficency, discording with settlement system. Second problem is that Tukpyolshi and Jik'halshi - cities under direct control of the central government as metropolitan area - underbounded cities. Underbounded city discomforts residential life and increases external elects of local pulic services. Especially this problem is Seoul, Pusan and Daegu. Third problem is that Do-areas are mostly two larger in integrating into single sphere of life. In fact each of them consistes of two or three sphere of life. Fourth Problem is metropolitan government system that central city is seperated from complementary area, i.e. Do. It brings about weakening the economic force of Do. Fifth problem is that several cities divided single sphere of life. It is main factor of finantial inefficency and facing difficult regional administration. Finally necessity of rural parish (Myun.) is diminished gradually with higher order center oriented activty of rural residents. First of all administrative area system should corresponds with substantial sphere of life in order to solve these problems. Followings are some key directions this study proposes on the reform of administrative area system from that standpoint. 1. Principles of reorgnization -- integration of central dty with complementary area. -- correspondence of administrative hierarchical structure with settlement system. -- correspondence of boundary of administrative area with sphere of life. 2. Reform strategy -- Jik'halshi is integrated with Do and is under the contol of Do. -- Small Seoul shi (city) which have special functions as captal is demarcated in Seoul tukpyolshi and 22 autonomous distrcts of Seoul tukpyolshi is integrated into 3-4 cities. -- Neighboring cities (Shies) in single sphere of life are intrgrated into single city (Shj). -- Myun and Ri are abolished in rural region and new unit of local administrative area on the basis of lowest order sphere of life into which 3-4 Ries are integrated replaces them.

• Journal of Communications and Networks
• /
• v.15 no.5
• /
• pp.504-513
• /
• 2013

Communication in delay tolerant networks (DTNs) relies on message transport by mobile nodes, and a correct understanding of the node mobility characteristics is therefore crucial to the design of an efficient DTN routing protocol. However, previous work has mainly focused on uncovering all behaviors of node movement, which is not conducive to accurately detecting the specific movement characteristics of a different node. In this paper, we seek to address this problem based on a consideration of social relationships. We first consider social ties from both static and dynamic perspectives. For a static perspective, in addition to certain accidental events, social relations are considered for a long time granularity and tend to be stable over time. For a dynamic perspective, social relations are analyzed in a relatively short time granularity and are likely to change over time. Based on these perspectives, we adopted different efficient approaches to dividing node pairs into two classes, i.e., familiar and unfamiliar pairs. A threshold approach is used for static social ties whereas a density-based aggregation method is used for dynamic social relationships. Extensive experimental results show that both familiar and unfamiliar node pairs have the same inter-contact time distribution, which closely follows a power-law decay up to a certain point, beyond which it begins to exponentially decay. The results also demonstrate that the inter-contact time distribution of familiar pairs decays faster than that of unfamiliar pairs, whether from a static or dynamic perspective. In addition, we also analyze the reason for the difference between the inter-contact time distributions of both unfamiliar and familiar pairs.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39C no.1
• /
• pp.47-59
• /
• 2014

This paper deals with a vision-based trajectory tracking control system for a quadrotor-type UAV for entertainment purpose in indoor environment. In contrast to outdoor flights that emphasize the autonomy to complete special missions such as aerial photographs and reconnaissance, indoor flights for entertainment require trajectory following and hovering skills especially in precision and stability of performance. This paper proposes a trajectory tracking control system consisting of a motion generation module, a pose estimation module, and a trajectory tracking module. The motion generation module generates a sequence of motions that are specified by 3-D locations at each sampling time. In the pose estimation module, 3-D position and orientation information of a quadrotor is estimated by recognizing a circular ring pattern installed on the vehicle. The trajectory tracking module controls the 3-D position of a quadrotor in real time using the information from the motion generation module and pose estimation module. The proposed system is tested through several experiments in view of one-point, multi-points, and trajectory tracking control.

• Smart Structures and Systems
• /
• v.26 no.3
• /
• pp.373-390
• /
• 2020

Hybrid simulation (HS) is a versatile tool for structural performance evaluation under dynamic loads. Although real structural responses are often multiple-directional owing to an eccentric mass/stiffness of the structure and/or excitations not along structural major axes, few HS in this field takes into account structural responses in multiple directions. Multi-directional loading is more challenging than uni-directional loading as there is a nonlinear transformation between actuator and specimen coordinate systems, increasing the difficulty of suppressing loading error. Moreover, redundant actuators may exist in multi-directional hybrid simulations of large-scale structures, which requires the loading strategy to contain ineffective loading of multiple actuators. To address these issues, lately a new strategy was conceived for accurate reproduction of desired displacements in bi-directional hybrid simulations (BHS), which is characterized in two features, i.e., iterative displacement command updating based on the Jacobian matrix considering nonlinear geometric relationships, and force-based control for compensating ineffective forces of redundant actuators. This paper performs performance validation and application of this new mixed loading strategy. In particular, virtual BHS considering linear and nonlinear specimen models, and the diversity of actuator properties were carried out. A validation test was implemented with a steel frame specimen. A real application of this strategy to BHS on a full-scale 2-story frame specimen was performed. Studies showed that this strategy exhibited excellent tracking performance for the measured displacements of the control point and remarkable compensation for ineffective forces of the redundant actuator. This strategy was demonstrated to be capable of accurately and effectively reproducing the desired displacements in large-scale BHS.

• Journal of Korean Academy of Nursing
• /
• v.53 no.6
• /
• pp.652-665
• /
• 2023

Purpose: This study aimed to develop a nursing clinical judgment scale (NCJS) and verify its validity and reliability in assessing the clinical judgment of nurses. Methods: A preliminary instrument of the NCJS comprising 38 items was first developed from attributes and indicators derived from a literature review and an in-depth/focus interview with 12 clinical nurses. The preliminary tool was finalized after 7 experts conducted a content validity test based on a data from a preliminary survey of 30 hospital nurses in Korea. Data were collected from 443 ward, intensive care unit, emergency room nurses who voluntarily participated in the survey through offline and online for the verification of the construct validity and reliability of the scale. Results: The final scale comprised 23 items scored on a 5-point Likert scale. Six factors - integrated data analysis, evaluation and reflection on interventions, evidence on interventions, collaboration among health professionals, patient-centered nursing, and collaboration among nurse colleagues - accounted for 64.9% of the total variance. Confirmatory factor analysis supported the fit of the measurement model, comprising six factors (root mean square error of approximation = .07, standardized root mean square residual = .04, comparative fit index = .90). Cronbach's α for all the items was .92. Conclusion: The NCJS is a valid and reliable tool that fully reflects the characteristics of clinical practice, and it can be used effectively to evaluate the clinical judgment of Korean nurses. Future research should reflect the variables influencing clinical judgment and develop an action plan to improve it.