• 한국세라믹학회지
• /
• 제37권5호
• /
• pp.473-478
• /
• 2000

The TiO2 powder with the values of the large specific surface area more than 150$m^2$/g has been prepared with the homogeneous precipitation process below 5$0^{\circ}C$ and its formation mechanism was investigated using the SEM, TEM and Raman Spectroscopy. With the spontaneous hydrolysis of aqueous TiOCl2 solutions, all the precipitates were fully and homogeneously crystallized with the rutile TiO2 phase simply by heating, which as transformed to the anatase TiO2 phase as increasing the addition of SO42- ions to the aqueous TiOCl2 solution. The precipitates were formed with spherical secondary particles which consisted of acicular, spherical and mixed primary particles corresponding to the rutile, anatase and mixed phases, respectively. It can be thought that the formation and phase determination of crystalline TiO2 powders even at ambient temperature would be related with the existence of the capillary force. This force might be varied depending on the shape change of the primary particles.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2006년도 춘계학술논문 발표대회 제6권1호
• /
• pp.147-153
• /
• 2006

Photocatalyst reaction has limit of its usage because application range mostly centered on atmosphere purification area. Thus, it is true that an alternative plans are necessary to increase usage of $TiO_2$ as photocatalyst material. (1) The result of flow felt according to $TiO_2$ replacement rate has shown that both of anatase type and rutile type over 12% deviated from desired flow, $110{\pm}5mm$. Consequently, the range below 9% will be suitable when the anatase type $TiO_2$ if used for functional additives if workability is considered. (2) After compressive strength test, replacement rate 6-9% is estimated as suitable range if $TiO_2$ is used as compressive strength material. Rutile type and anatase type are suitable for in early-age strength and long-age strength respectively. (3) It was revealed that bending strength was dramatically decreased when replacement rate was increased. The main reason were the increase of $TiO_2$ doesn't influence hydration reaction and the decrease of bending strength. (4) The result from the water purification properties test using ion-chromatograhpy has shown that the condition with anatase type $TiO_2$ was normally better than rutile type on the same replacement rate.

• Carbon letters
• /
• 제7권4호
• /
• pp.259-265
• /
• 2006

Carbon-coated $TiO_2$ was prepared by $CCl_4$ solvent mixing method with the different heat treated temperatures (HTTs). Since the carbon layers derived from pitch on the $TiO_2$ particles were porous, the carbon-coated $TiO_2$ sample series showed a good adsorptivity. The values of BET surface areas measured were shown independently on the HTTs. The surface states by SEM present to the characterization of porous texture on the carbon-coated $TiO_2$ sample and carbon distributions on the surfaces. From XRD data, PT700 and PT750 were shown the X-ray diffraction patterns of the anatase $TiO_2$, but PT800 and PT850 were kept anatase-type structure even after heating at $800^{\circ}C$, though small amount of the rutile-type structure appears. The results of EDX microanalyses were observed for each sample show the spectra corresponding to almost all samples similar to C, O and Ti elements with an increase of HTTs. Finally, the excellent photoactivity of carbon-coated $TiO_2$ (especially, PT700 and PT750) could be attributed to the homogeneous coated carbon on the external surface and the structural anatase phase.

• 마이크로전자및패키징학회지
• /
• 제11권4호
• /
• pp.55-59
• /
• 2004

본 논문은 광 활성도가 가장 좋은 아나타제(anatase)상의 광촉매 $TiO_2$분말을 상온에서 aerosol deposition 법을 사용하여 박막을 제조하였다. 이런 제조 방법은 aerosol 분말을 초음속으로 분사하여 기판에 증착시키는 방법으로, 저온에서 박막증착이 가능하여 thermal stress를 줄일 수 있고, 공정 단가를 낮출 수 있다는 장점이 있다. 박막 제조시 aerosol bath의 압력은 500 torr이고, chamber의 압력은 0.4 torr 였다. 이런 압력차는 $0.4 mm{\times}10 mm$의 크기의 노즐을 통해 $TiO_2$ 나노 분말을 초음속으로 가속하여 기판에 증착시켰다. 박막 제조를 위해 사용한 기판은 수질정화에 응용하기 위해 직경 50 mm인 원판 SUS mesh를 사용하였다. $TiO_2$ 분말의 고른 분포를 위해 $TiO_2$ 분말에 함유되어 있는 수분을 제거하고 이차 입자의 생성을 억제하기 위해서 알코올 bath 속에서 90분간 초음파 세척을 한 후 건조하였다. SUS mesh 위에 증착되어 있는 $TiO_2$ 박막의 입자크기를 알아보기 위해 주사 현미경(SEM)으로 분석하였으며, $1 {\mu}m$정도의 입자 크기를 관찰 할 수 있었다. X-ray diffraction (XRD) 분석 결과 aerosol deposition 후에도 분말의 anatase상은 그대로 유지되었으며, 이런 결과는 광촉매 작용을 이용한 수처리용 필터로 활용이 가능하다.

• 한국세라믹학회:학술대회논문집
• /
• 한국세라믹학회 2000년도 춘계총회,특별강연,심포지움,연구발표회
• /
• pp.40.1-40.1
• /
• 2000

• 한국세라믹학회:학술대회논문집
• /
• 한국세라믹학회 2002년도 추계총회 및 연구발표회 초록집
• /
• pp.47.1-47
• /
• 2002

• 한국세라믹학회:학술대회논문집
• /
• 한국세라믹학회 2003년도 추계총회 및 연구발표회 초록집
• /
• pp.53.1-53
• /
• 2003

• Carbon letters
• /
• 제8권3호
• /
• pp.177-183
• /
• 2007

[ $TiO_2$ ]ACF composites were prepared by the electrochemical method with Titanium (IV) n-butoxide (TNB) electrolyte under different electrochemical operation time. The BET surface area for $TiO_2$/ACF composites decrease with the increase of electrochemical operation time. There is a single crystal structure which is anatase in all of the samples from the data of XRD. The SEM micrphotographs of $TiO_2$/ACF composites show that the $TiO_2$ particles were well mixed with the ACF. There are O and P with strong C and Ti peaks in all samples from EDX results, and it also shows that a decrease of the C content with a increasing of Ti content with increasing of the electrochemical operation time in the over all composites. DSC cures show that the exothermic peak of all composites at $560^{\circ}C$ represents the transformation heat of amorphous parts to anatase phase and the discontinuous grain growth of the transformed anatase particles. Finally, the excellent photoactivity of $TiO_2$/ACF composites (especially, ACFT10) could be attributed that the decrease of concentration of MB can be concluded to be much faster for the adsorption by ACF than for photocatalytic decomposition by $TiO_2$.

• 한국세라믹학회지
• /
• 제50권2호
• /
• pp.116-121
• /
• 2013

Zinc crystal glaze has its limits in practical use of commercial glaze due to the controlling crystal. In order to overcome this limit, and to heighten the practical usage, this study is aimed to develop artificially controlling willemite ($Zn_2SiO_4$) zinc crystalline glaze. For this purpose, it has experimented with the effect of anatase form and rutile form using $TiO_2$ known as nucleating agent. In zinc glaze, adding $TiO_2$ resulted with anatase form becoming more effective at nucleating formation and growth of willemite than the rutile form. Furthermore, it turned out that using the $TiO_2$ - anatase form, with synthetic seeds (zinc silicate), the numbers and positions of crystals can be controlled artificially.

• 한국세라믹학회지
• /
• 제41권6호
• /
• pp.471-475
• /
• 2004

졸겔 공정으로 안정한 TiO$_2$, SiO$_2$, PBA(Pseudo Boehemite Alumina) 졸을 제조하였다. 제조한 졸 용액은 비교적 균일한 10∼30nm의 입자크기를 나타내었다. TiO$_2$졸에 SiO$_2$졸의 첨가량이 증가함에 따라, anatase상에서 rutile 상으로 전이되는 상전이 온도를 $600^{\circ}C$ 이상으로 증가시켜 광분해 특성을 향상시켰다. 또한, TiO$_2$ 졸 용액에 SiO$_2$ 졸을 10∼30wt% 첨가하여 120$0^{\circ}C$ 이상의 고온 소성 후에도 anatase가 주된 상으로 소량의 rutile 상이 관찰되었다 또한 SiO$_2$20wt% 첨가 시, 최대의 광분해 특성을 나타내었다. 그러나, PBA 졸의 첨가는 첨가량에 관계없이 광분해 특성에 영향을 주지 않았다.