• 한국산학기술학회논문지
• /
• 제11권11호
• /
• pp.4473-4482
• /
• 2010

한방의학에서 절진에 속하는 맥진은 28가지의 맥상 분석 방식을 기존의 아날로그 시스템에 적용하여 사용하였다. 그러나 아날로그 시스템은 ECG (Electrocardiogram)와 같은 특징점 추출방법을 이용해 맥파를 분석하는데 특징점 추출방법과 입력 신호의 과도한 증폭으로 맥파의 Clipping현상이 발생되어 맥파의 모양을 정확하게 분석할 수 없는 문제점들이 발생되었다. 본 논문에서는 이러한 아날로그 맥진기 시스템에 문제점을 보완하기 위한 방안의 하나로 전자 맥진기 시스템의 중요한 부분이라 할 수 있는 디지털 필터를 설계하기 위하여 신호의 특징점 추출을 위한 C-spline 보간법을 이용하고, signal modeling에 Prony's method로 디지털 필터를 설계하는 방법을 제안 하였다. 또한 기존의 아날로그 시스템에 맥파 분석 방법의 문제점을 보안하기 위한 전자 맥진기 시스템을 구성하여 새로운 맥파 분석 알고리즘과 아날로그 시스템에서 분석이 어려웠던 맥파의 모양 분석 알고리즘을 제안하였다. 증폭 단 이후 제안된 필터 설계방법을 이용하여 구성된 전자 맥진기 시스템의 출력 값이 아날로그 맥진기의 출력 파형과 아주 유사하면서 파형이 깨끗한 신호를 얻을 수 있어 설계방법의 적합성을 확인 하였고, 제안된 알고리즘에 의한 맥파 분석 결과가 아날로그 시스템의 맥파 분석 보다 정확한 맥파를 분석할 수 있었음을 확인할 수가 있었다.

• 한국통신학회논문지
• /
• 제37B권12호
• /
• pp.1091-1101
• /
• 2012

Device-to-device (D2D) 통신은 짧은 전송 거리를 적은 전송 전력으로 인프라를 거치지 않고 직접 통신하여 근거리 서비스를 제공할 수 있는 통신 방법으로 기대되고 있다. 이러한 장점들로 인해, 대규모 D2D 시스템에 대한 수요가 존재할 것이다. D2D 통신 자원이 셀룰러 망에 의해 관리되는 네트워크 지원형 D2D 시스템은 제어 신호를 위한 시그널링 오버헤드 때문에 많은 수의 D2D 기기들을 지원하는 것이 불가능하다. 이런 경우에는 오히려 네트워크 조정을 전혀 하지 않는 것이 하나의 해결책이 될 수 있다. 본 논문에서는 이러한 uncoordinated D2D 시스템을 고려하는데, 이는 많은 수의 D2D 기기들이 대규모로 배치되어 네트워크 조정 없이 동작하는 D2D 시스템을 의미한다. D2D 시스템의 전송 용량을 분석하여, uncoordinated D2D 시스템이 셀룰러 네트워크 내에서 상향링크 스펙트럼을 공유하면서 공존할 수 있는 타당성 조건을 도출한다. 또한, 이러한 D2D 시스템의 적절한 전송 전력 수준 및 링크 거리에 관한 연구 결과를 제시함으로써, 대규모 D2D 통신의 운용점에 관한 가이드라인을 제공한다.

• 한국건설관리학회논문집
• /
• 제14권5호
• /
• pp.44-54
• /
• 2013

전세계적으로 녹색 건설에 대한 관심과 필요성이 높아지고 있는 시점에 있다. 정부도 녹색 성장 기조 하에 건축물의 에너지 사용량 저감을 위한 공격적인 목표를 설정하고 다양한 정책적 지원책을 통해 추진하고 있다. 하지만 녹색건설 시장의 지속적인 성장을 위해서는 수요 주체의 녹색 투자 의사 결정을 지원할 수 있는 녹색 건설 투자 비용과 경제적 편익 정보가 제공되어야 하지만, 녹색 건설 선진국에 비해 국내 건설산업계에서는 녹색건설의 비용이나 편익과 관련한 구체적이고 객관적인 자료가 부족하고 분석이 부족한 실정이다. 이에 본 연구에서는 건설 산업 차원에서 녹색 건설 비용의 개념을 정의하고, 녹색 비용 및 편익 정보 체계와 관련한 녹색건설선진국의 다양한 사례를 살펴봄으로써 국내 녹색건축 비용 및 편익 정보 체계의 문제점을 도출하고 개선 방안을 제시하였다. 본 연구에서 제시한 녹색 건설 비용 및 편익 정보의 분류, 축적, 활용 메커니즘이 해당 건설 상품의 경제적 타당성 검증 작업을 견인할 수 있을 것으로 기대한다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 추계학술대회 논문집
• /
• pp.818-823
• /
• 2005

Creep damage is one of the mosl important characteristics for the stability of high temperature structures such as huge energy converting facilities. Creep failure of Type 316LN stainless steel is highly correlated to generation and growth of the voids. In this paper, in order to investigate the correlation of creep rupture time and ultrasonic parameters (group velocity, angular velocity), creep-damaged Type 316LN specimens and measurements for the ultrasonic parameters were made. However, bi-directional measurements were applied along the load direction and the perpendicular direction to the load line by means of the contact type probe of which the central frequencies are 10MHz, 15MHz and 20MHz. Analyzing the angular velocities of the ultrasonic signals obtained from the load direction, it was confirmed that the angular velocities were declined as the creep time passed when 15MHz and 20MHz probes were used. Also, the group velocities were declined for all three frequencies as the creep time increased. Thus, positive feasibility for the creep damage evaluation by means of the angular and group velocities was confirmed. Moreover, result of analysis for the ultrasonic signal which was obtained from the perpendicular direction upon the angular and group velocities indicated little variation for both of the angular and group velocities. Therefore, the creep damage is likely to represent anisotropic itself.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 추계학술대회 논문집
• /
• pp.151-156
• /
• 2008

The after 1974 capital region electric railroad is opened to traffic Koraill and Seoul metro adopt each other different power supply method and they operate and they are come. AC 25[kv] method voltage the insulation becomes larger standing distance highly, the case tunnel section which will introduce in the underground segment becomes on a large scale and the cost of construction increases to the city center and the underground segment adoption of DC method was many. To recent times with R-bar (Rigid-bar) introductions change of tunnel section the introduction of AC method came to be easy without in the underground segment. Operates sees in the electric protection where the Seoul metro and the Korail are different each other and, from the dead section segment the interior electric light to put out lights the passenger brings about inconveniently and the civil appeal which demands a power supply method unification occurs, within the company interchange electric railroad brazier safety improvement and maintenance expense curtailment etc. the flaw is original proposal, is a condition which finishes a feasibility study service about the power supply method fringe land. Interchange analysis of the DC electric railway it leads from the present paper and it compares under analyzing being it could be reflected to also the route which is in the process of actual using boil the strong point and a weak point of DC and AC method of the establishment route constructive at the time of and

• 한국의류학회지
• /
• 제24권6호
• /
• pp.895-906
• /
• 2000

The study planned to testify the accuracy of the 3D scanner through analyzing the human body measurement method and the evaluation of flare skirt with 3D scanner. The results obtained from this study were as follows; First, the results of measurement for the dress form and human body by 3D scanner were more accurate than one or two dimensional measurement method. Second, from the results of the scan for the flare skirts as worn the human body, we could obtain very accurate horizontal section map. Third, in the clothing ergonomics viewpoint, the accuracy of the 3D scanner was very excellent and its utility was higher than that of the moir photography method. Therefore, the 3D scanner is very useful for the human body measurement and the wearing evaluation. In a nutshell, this study illustrates that we have to develop a program of automatic human body measurement system which will enhance the application of the 3D scanner.

• Asian Journal of Business Environment
• /
• 제10권4호
• /
• pp.29-34
• /
• 2020

Purpose: Town of Woldia, a semi-arid region in the Northern Wollo region of Ethiopia, faces water supply shortage in general, though the town possesses a running stream of clean water throughout the year. This study is aimed at analyzing the possibility of using rainwater for water scarcity and non-potable water needs of the Woldia University. A careful study and analysis have been made to assess the feasibility of using rainwater in place of the tap water supply. Research design and methodology: This study was done inside the main campus of Woldia University located in Woldia town. The runoff water from the roof of buildings was studied, by the time of rainfall in the town. Also, the budget needed for implementing a rainwater harvesting system was calculated. Results: The findings of the study clearly indicates that the requirements of the water to use for flushing, cleaning, and washing toilets in the administrative buildings and classrooms can be satisfied by using rainwater as an alternative to tap water. Conclusion: Based on the results the study finds it is benefitable for the Woldia University to install the rainwater harvesting system at the earliest to solve the water problems prevailing in the current situation.

• Journal of Electrical Engineering and Technology
• /
• 제11권2호
• /
• pp.309-319
• /
• 2016

This paper presents a new recognition and classification method for power quality (PQ) disturbances on the basis of pattern linguistic values. This method solves the difficulty of recognizing disturbances rapidly and accurately by using fuzzy logic. This method uses classification disturbance patterns to define the linguistic values of fuzzy input variables and used the input variables of corresponding disturbance pattern to set membership functions. This method also sets the fuzzy rules by analyzing the distribution regularities of the input variable values. One characteristic of this method is that the linguistic values of fuzzy input variables and the setting of membership functions are not only related to the input variables but also to the character of classification disturbance and the classification results. Furthermore, the number of fuzzy rules is equal to the number of disturbance patterns. By using this method for disturbance classification, the membership function and design of fuzzy rules are directly related to the objective of classification, thus effectively reducing the complexity of the design process and yielding accurate classification results. The classification results of the simulation and measured data verify the feasibility and effectiveness of this method.

• 한국환경과학회지
• /
• 제23권1호
• /
• pp.7-23
• /
• 2014

This study estimates unit for the nonpoint source(NPS), classified according to the existing Level-1(large scale) land cover map, by monitoring the measurement results from each Level-2(medium scale) land cover map, and verifies the applicability by comparison with previously calculated units using the Level-1 land cover map. The NPS pollutant loading for a basin is evaluated by applying the NPS pollutant unit to Dongcheon basin using the Level-2 land cover map. In addition, the BASINS/HSPF(Better Assessment Science Integrating point & Non-point Sources/Hydrological Simulation Program-Fortran) model is used to evaluate the reliability of the NPS pollutant loading computation by comparing the loading during precipitation in the Dongcheon basin. The NPS pollutant unit for the Level-2 land cover map is computed based on precipitation measured by the Sangju observatory in the Nakdong River basin. Finally, the feasibility of the NPS pollutant loading computation using a BASINS/HSPF model is evaluated by comparing and analyzing the NPS pollutant loading when estimated unit using the Level-2 land cover map and simulated using the BASINS/HSPF models.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2003년도 가을 학술발표회 논문집
• /
• pp.549-555
• /
• 2003

The objective of かis study is to investigate the feasibility of piezoelectric transducers as a damage detection system for civil infrastructures. There have been considerable amount of efforts by the modal analysis community to localize damage and evaluate its severity without looking at a reliable way to excite the structure. The detection of damages by modal analysis and similar vibration techniques depends upon the knowledge and estimation of various modal parameters. In addition to the associated difficulties, such low-frequency dynamic response based techniques fail to detect incipient damages. Smart piezoelectric ceramic (PZT) transducers which act as both actuators and sensors in a self-analyzing manner are emerging to be effective in non-parametric health monitoring of structural systems. In this paper, we present the results of an experimental study for the detection of damages using smart PZT transducers on the steel plate. The method of extracting the impedance characteristics of the PZT transducer, which is electro-mechanically coupled to the host structure, is adopted for damage detection. Two damages are simulated and assessed by the bonded PZT transducers for characterization. The experimental results verified the efficacy of the proposed approach and provided a demonstration of good robustness at the realistic steel structures, emphasizing the great potential for developing an automated in situ structural health monitoring system for application to large civil infrastructures without the need to blow the modal parameters.