• 제목/요약/키워드: analytic condition

검색결과 410건 처리시간 0.021초

TBM 현장에서 막장전방 예측기법 결과의 확률론적 분석을 통한 지반상태 평가 (A probabilistic assessment of ground condition prediction ahead of TBM tunnels combining each geophysical prediction method)

  • 이강현;서형준;박정준;박진호;이인모
    • 한국터널지하공간학회 논문집
    • /
    • 제18권3호
    • /
    • pp.257-272
    • /
    • 2016
  • TBM으로 터널 시공 중 막장면에서 갑작스럽게 문제가 발생하는 경우 공간적인 제한 때문에 NATM공법으로 시공되는 터널에 비해서 적절한 대처를 하기가 어렵다. TBM으로 터널 시공 중에 막장전방의 지반상태를 예측하는 것은 매우 중요하기 때문에 탄성파, 전자기파 등을 이용하여 TBM 면판 전방의 지반상태를 예측하는 연구 및 기술개발이 이루어졌다. 대부분의 TBM 현장에서는 공사기간 및 비용을 고려하여 1개의 막장전방 예측기법을 적용한다. 그러나 막장전방 예측기법의 종류에 따라서 탐사심도, 적용 가능한 지질조건, 예측할 수 있는 대상, 예측 정확도 등이 다르다. 복합적인 지질조건에 위치한 TBM 터널 시공 시에는 여러 가지 막장전방 예측기법을 적용하는 것이 막장 전방의 지질 조건을 정확하게 예측할 수 있을 것으로 판단된다. 여러 가지 막장전방 예측기법을 동시에 적용하였을 경우 각각의 기법으로부터 얻어진 지반상태는 다른 결과를 나타낼 수 있다. 따라서 본 연구에서는 각각의 막장전방 예측기법으로부터 얻어진 막장전방의 지반상태를 종합적으로 평가하기 위한 방법을 제안하였다. 확률론적 분석과 계층분석기법을 이용하여 막장전방의 지반 상태를 종합적으로 평가할 수 있는 통합 모델을 제시하였다. 또한 본 연구에서 제안한 모델을 가상의 지반에 적용하여, 종합적으로 지반 상태를 평가할 수 있음을 확인하였다.

시공여건을 반영한 TBM선정 방법에 대한 연구 (Study on the selection of TBM in consideration of field conditions)

  • 오준근;사공명
    • 한국터널지하공간학회 논문집
    • /
    • 제16권2호
    • /
    • pp.125-133
    • /
    • 2014
  • 본 연구에서는 지반 및 현장조건을 고려한 TBM 선정방법을 제시하였다. 지반, 환경, 가격조건별로 TBM 선정에 영향을 미치는 인자와 굴착장비를 선정 분류 하였다. 선정된 영향인자와 장비 간 가중치를 AHP기법을 적용하여 산정하였다. 선정된 영향인자의 분석결과 기본요소에서는 지반조건이 가장 중요한 영향요소로 확인되었으며, 세부요소로서 암반조건에서는 강도, 토사지반조건에서는 수압이 가장 중요한 인자로 확인되었다. 주변 환경조건에서는 시공성에 영향을 줄 수 있는 주변구조물 인접여부가 중요한 인자로 확인되었다. 마지막으로 도출된 각 영향인자별 가중치를 토대로 굴착현장에 적용 가능한 TBM을 선정하고 도출결과와 실제 현장에 적용된 장비의 비교를 통하여 본 연구에서 제안하는 방법에 대한 검증이 이루어 졌다.

드릴가공에 대한 유한요소해석 (A Finite Element Analysis of the Drilling Process)

  • 김국원;안태길
    • 한국정밀공학회:학술대회논문집
    • /
    • 한국정밀공학회 2002년도 춘계학술대회 논문집
    • /
    • pp.1055-1058
    • /
    • 2002
  • Drilling process is one of the most common, yet complex operations among manufacturing processes. The performance of a drill is largely dependent upon drilling forces. Many researches focused on the effects of drill parameters on drilling forces. In this paper, the stresses occurring in drilling process are analyzed by finite element method. The analytic drilling forces considering the drill parameters and drilling conditions are used. Also, with ANSYS, geometric modeling and mesh generation of drill is performed automatically. From the study, optimal drill design and drilling condition determination may be achieved.

  • PDF

부등호 제약조건 처리 알고리즘 개발 및 전력계통 해석 적용 (A Development of Inequality Constrained Algorithm and Applying to Power System Analysis)

  • 양민욱;김건중
    • 전기학회논문지
    • /
    • 제62권10호
    • /
    • pp.1349-1353
    • /
    • 2013
  • The optimal analysis has objective functions, equality constraint functions and inequality functions. Objective functions may be used with inequality function, because occasionally variables are moved to non-analytic condition with calculating objective functions. But inequality constraint functions are very complicated problem in a optimal analysis. this paper suggest a method to solve inequality constraint functions.

대학도서관 구성요소의 역할 및 그 실태분석 (An analytic study of components of university libraries)

  • 전재봉
    • 한국도서관정보학회지
    • /
    • 제16권
    • /
    • pp.1-32
    • /
    • 1989
  • The purpose of the study is to provide the basic information for the improvement of university libraries in future. To acquire the basic information, the equipments and facilities, materials, personnels and budget elements of university are analyzed. The results of this study can be summarized as follows: 1. University outhorities primary concerned the establishment of universities rather than university libraries. 2. University libraries do not secure the facilities, materials and personnels sufficiently. 3. The realities of university libraries in Korea are very poor condition.

  • PDF

사운딩로켓의 고도 극대화를 위한 최적조건 (Optimal Conditions for Maximizing Altitude of Sounding Rocket)

  • 박애니;이상현
    • 한국추진공학회:학술대회논문집
    • /
    • 한국추진공학회 2011년도 제37회 추계학술대회논문집
    • /
    • pp.144-149
    • /
    • 2011
  • A study to determine the optimal jet conditions for maximizing altitude of the sounding rocket is conducted. The behavior of a simplified linear momentum equation including aerodynamic drag is investigated. The analytic solutions are obtained and compared with numerical solutions. It is shown that there are the optimal jet conditions for maximizing altitude of a sounding rocket according to the rocket mass ratio.

  • PDF

ON BROWDER'S THEOREM

  • Lee, Dong Hark
    • Korean Journal of Mathematics
    • /
    • 제10권1호
    • /
    • pp.11-17
    • /
    • 2002
  • In this paper we give several necessary and sufficient conditions for an operator on the Hilbert space to obey Browder's theorem. And it is shown that if S has totally finite ascent and $T{\prec}S$ then $f(T)$ obeys Browder's theorem for every $f{\in}H({\sigma}(T))$, where $H({\sigma}(T))$ denotes the set of all analytic functions on an open neighborhood of ${\sigma}(T)$.

  • PDF

GENERALIZED WEYL'S THEOREM FOR FUNCTIONS OF OPERATORS AND COMPACT PERTURBATIONS

  • Zhou, Ting Ting;Li, Chun Guang;Zhu, Sen
    • 대한수학회보
    • /
    • 제49권5호
    • /
    • pp.899-910
    • /
    • 2012
  • Let $\mathcal{H}$ be a complex separable infinite dimensional Hilbert space. In this paper, a necessary and sufficient condition is given for an operator T on $\mathcal{H}$ to satisfy that $f(T)$ obeys generalized Weyl's theorem for each function $f$ analytic on some neighborhood of ${\sigma}(T)$. Also we investigate the stability of generalized Weyl's theorem under (small) compact perturbations.

ON m-ISOMETRIC TOEPLITZ OPERATORS

  • Ko, Eungil;Lee, Jongrak
    • 대한수학회보
    • /
    • 제55권2호
    • /
    • pp.367-378
    • /
    • 2018
  • In this paper, we study m-isometric Toeplitz operators $T_{\varphi}$ with rational symbols. We characterize m-isometric Toeplitz operators $T_{\varphi}$ by properties of the rational symbols ${\varphi}$. In addition, we give a necessary and sufficient condition for Toeplitz operators $T_{\varphi}$ with analytic symbols ${\varphi}$ to be m-expansive or m-contractive. Finally, we give some results for m-expansive and m-contractive Toeplitz operators $T_{\varphi}$ with trigonometric polynomial symbols ${\varphi}$.