• 한국자동차공학회논문집
• /
• 제10권5호
• /
• pp.168-173
• /
• 2002

The durability test, along with the crashworthiness test, requires the most time and expense in the vehicle development process. The durability design using CAE tools reduces the time required for both the durability test and actual vehicle production. Existing dynamic stress analyses designed fir the analysis of vehicle fatigue mainly calculate the dynamic stress history and fatigue after performing dynamic analysis and stress analysis with relevant software applications and then superpositioning the dynamic load history and stress influence coefficient at each joint. This approach is a complex process, taking into account the flexibility of the parts. It is, however, incapable of giving accurate consideration to the contacts between components, the non-linearity of materials, and tire-road surface interactions. This approach also requires that the analysts have an expertise in software applications of various kinds or an expert in each area must perform the analysis. This requires as a great deal of manpower and time. In order to complement the existing approaches for dynamic stress analysis, this study aims at the following: (1) to suggest the simple and accurate analysis technique which is capable of producing all the possible necessary results; (2) to reduce dramatically the time and manpower needed to construct a model designed to analyze dynamics, quasi-static stress, and fatigue; and (3) to enable an accurate analysis of fatigue by improving the accuracy of dynamic stress. we verify the presented analysis method through durability evaluation of the knuckle of passenger car.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 추계학술대회논문집A
• /
• pp.363-369
• /
• 2000

Due to environmental problem for reduction in fuel consumption, vehicle emission and etc., many automotive makers are trying to reduce the weight of the vehicle. The most effective way to reduce the weight of vehicle is to use lighter materials, aluminum, plastics. Aluminum Space Frame has many advantages in weight reduction, body stiffness, ease of model change and so on. So, most of automotive manufacturers are attempting to develope Aluminum Space Frame body. For these reasons, we have developed Aluminum Intensive Vehicle based on steel monocoque body with Hyundai Motor Company. We achieved about 30% weight reduction, the stiffness of our model was higher than that of conventional steel monocoque body. In this paper, with optimization using FEM analysis, we could get more weight reduction and body stiffness increase. In the long run, we analyzed by means of simulation using PAM-CRASH to evaluate crush and crash characteristic of Aluminum Intensive Vehicle in comparison to steel monocoque automotive.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2008년도 정기 학술대회
• /
• pp.555-560
• /
• 2008

Dynamic interaction analysis between actively controlled Maglev and bridge is carried out. For this, dynamic governing equation for 2-dof Maglev vehicle and optimal feedback control scheme of DOFC are developed. And then the dynamic effect of the 1st natural frequency of bridge, vehicle/bridge mass ratio and damping coefficient of bridge to the both of air-gap variations of UTM-01 maglev vehicle and bridge center maximum displacement response are investigated. From the results of numerical simulation, it is found that the 1st natural frequency of bridge, vehicle/bridge mass ratio and damping coefficient of bridge does not affect greatly within design velocity of the vehicle.

• 한국자동차공학회논문집
• /
• 제3권3호
• /
• pp.109-118
• /
• 1995

This paper presents a mathematical vehicle model to analyze the dynamic characteristics of a vehicle undergoing braking in a turn. Two kinds of field tests, braking in a steady state turn and braking in a J-turn are performed. Computer simulation results are compared with test results and the braking effect on a vehicle cornering behavior is examined. Also, sensitivity analysis is applied to determine the effect of design parameter changes on the response of vehicle dynamic system.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 추계학술대회 논문집
• /
• pp.251-257
• /
• 2007

This paper describes the variation of the critical speed of an urban railway vehicle according to the change of suspension characteristics. Suspensions of a railway vehicle are composed of primary and secondary suspensions. Generally, main focus of the stability analysis has been the primary suspension. However, secondary suspension has large effects on the stability as well as the ride quality of a vehicle. In this paper, stability of an urban railway vehicle is discussed in relation to the variation of characteristics of both primary and secondary suspension. For this, modal analysis is carried out using a linear dynamic model of a half vehicle and a polynomial fit for Kalker's creep coefficients. Stability along with change of the effective conicity of a wheel is also investigated.

• 자동차안전학회지
• /
• 제5권2호
• /
• pp.51-56
• /
• 2013

In vehicle's door wiring harness (W/H) system is more toward to arrange a passenger compartment than a hinge and a weatherstrip. An opening/closing member of a vehicle is attached to a vehicle by a hinge in a manner enabling easy opening and closing of the opening/closing member. Such members include doors, such as side-doors and rear doors, and other opening/closing members, such as trunk lids. This article gives some insight into the dimensioning process, with special focus on large deflection analysis of wiring harness(W/H) in vehicle's door structures for durability problem. The Finite elements analysis for door wiring harness(W/H) is used for residual stresses and dimensional stability with bending flexible. Durability test data for slam test specimens were compared with the numerical predicted fatigue life for verification. The final testing of the component combines the effects of these microstructural features with the complex stress state arising from the combined service loading and residual stresses.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 1998년도 추계학술대회 논문집
• /
• pp.522-529
• /
• 1998

In this study, system analysis for a train vehicle with an articulated bogie frame adopted in TGV and TGV-K system is performed. System analysis is carried out as follows. First, modal analysis of each subsystem is performed to obtain the natural frequencies and mode shapes. Then modal analysis, of a whole vehicle is performed to obtain the potential interaction between the subsystems. Finallyforced response analysis, such as driving point mobility, is performed to obtain the dynamic response of specific points.

• 한국전산구조공학회논문집
• /
• 제13권2호
• /
• pp.165-178
• /
• 2000

본 연구에서는 고속철도차량(TGV)이 교량 상을 통과할 경우 교량의 동적 거동을 해석하기 위한 단순화된 3차원 차량-교량 상호작용해석 모델을 제시한다. 축하중 편심 모델링 방법을 도입하여 교량에 작용하는 축하중에 의한 비틀림력과 교량의 비틀림 회전변위의 영향을 고려하여 보다 정확한 교량의 거동에 대한 해석 결과를 얻는다. 앞기관차, 뒷기관차, 객차들에 대해서 운동에너지, 포텐셜에너지, 감쇠에너지를 차량과 교량의 자유도로 각각 나타내고, Lagrange의 운동방정식을 적용하여 차량과 교량의 운동방정식을 유도한다. 또한, 차량-교량 사이에 상호작용을 고려하여 교량에 작용하게 되는 하중에 관한 식을 유도하며, 이러한 하중을 받는 교량의 운동 방정식이 구성된다. 시간경과에 따라 차량의 위치를 결정하면서 그 위치에 따른 차량-교량 시스템의 질량행렬, 강성행렬, 감쇠행렬, 그리고 하중벡터를 구성할 수 있고, Newmark의 β방법(평균가속도법)을 이용하여 전체 차량-교량 시스템의 거동을 해석한다.

• 한국CDE학회논문집
• /
• 제22권2호
• /
• pp.101-109
• /
• 2017

In order to reduce the number of casualties by improving the survivability of the combat vehicle, the vulnerability analysis of the combat vehicle is needed. However, the actual test for the vulnerability analysis requires large experimental space and expensive equipment costs long time and large expense. It is needed to develop a new method that can replace the actual test. In the paper, we suggested a new approach to analyzing the vulnerability using the M&S method instead of the actual test. To analyze the vulnerability, the shot line analysis is performed to find out which part is penetrated by the bullet. The component of the parts is simplified to "Single-Target", "Double-Target", "Air gapped-Target" and can be performed the penetration analysis using the ANSYS Explicit Dynamics. The penetration depth and the residual velocity of the bullet are calculated by analyzing penetration of each part of the combat vehicle. The penetration data calculated the penetration analysis can be used to define the damage level of the combat vehicle. The purpose of this paper is to collect penetration data for various targets and bullets. And "7.62mmAP" is used as the bullet, "7075-T6" is used as a target.

• 한국자동차공학회논문집
• /
• 제24권5호
• /
• pp.581-587
• /
• 2016

Braking is a basic and an important safety feature for all vehicles, and the final braking performance of a vehicle is determined by the vehicle's ABS performance and tire performance. However, the combination of excellent ABS and tires will not always ensure good braking performance. This is due to the fact that tire performance has non-linearity and uncertainty in predicting the repeated increase and decrease of wheel slip when activating the ABS, thus increasing the uncertainty of tire performance prediction. Furthermore, existing studies predicted braking performance after using an ABS that used a wheel slip control as a controller, which was different from an actual vehicle's ABS that controlled angular acceleration, therefore causing a decrease in the prediction accuracy of the braking performance. This paper reverse-designed the ABS that controlled angular acceleration based on the information on brake pressure, etc., which were obtained from vehicle tests, and established a braking performance prediction analysis model by combining a multi-body dynamics(MBD) vehicle model and a magic formula(MF) tire model. The established analysis model was verified after comparing it with the results of the braking tests of an actual vehicle. Using this analysis model, this study analyzed the braking effect by vehicle factor, and finally designed a tire that had optimized braking performance. As a result of this study, it was possible to design the MF tire model whose braking performance improved by 9.2 %.