• Korean Journal of Agricultural and Forest Meteorology
• /
• v.20 no.1
• /
• pp.88-100
• /
• 2018

Methane emissions from rice paddies are the largest source of greenhouse gases in the agricultural sector, but there are significant regional differences depending on the surrounding conditions and cultivation practices. To visualize these differences and to analyze their causes and characteristics, the methane emissions from each administrative district in South Korea were calculated according to the IPCC guidelines using the data from the 2010 Agriculture, Forestry and Fisheries Census, and then the results were mapped by using the ArcGIS. The nationwide average of methane emissions per unit area was $380{\pm}74kg\;CH_4\;ha^{-1}\;yr^{-1}$. The western region showed a trend toward higher values than the eastern region. One of the major causes resulting in such regional differences was the $SF_o$ (scaling factor associated with the application of organic matter), where the number of cultivation days played an important role to either offset or deepen the differences. Comparison of our results against the actual methane emissions data observed by eddy covariance flux measurement in the three KoFlux rice paddy sites in Gimje, Haenam and Cheorwon showed some differences but encouraging results with a difference of 10 % or less depending on the sites and years. Using the updated GWP (global warming potential) value of 28, the national total methane emission in 2010 was estimated to be $8,742,000tons\;CO_2eq$ - 13% lower than that of the National Greenhouse Gas Inventory Report (i.e., $10,048,000tons\;CO_2eq$). The administrative districts-based map of methane emissions developed in this study can help identify the regional differences, and the analysis of their key controlling factors will provide important scientific basis for the practical policy makings for methane mitigation.

• Journal of radiological science and technology
• /
• v.29 no.3
• /
• pp.185-195
• /
• 2006

Purpose: This study investigated the status of radiation exposure doses since the establishment of the "Regulations on Safety Management of Diagnostic Radiation Generation Device" in January 6, 1995. Method: The level of radiation exposure in people engaged or having been engaged in radiation-related industries of inspection organizations, educational organizations, military units, hospitals, public health centers, businesses, research organizations or clinics over a 5 year period from Jan. 1, 2000 to Dec. 31, 2004 was measured. The 149,205 measurement data of 57,136 workers registered in a measurement organization were analysed in this study. Frequency analysis, a Chi-square test, Chi-square trend test, and ANOVA was used for data analysis. Results: Among 57,136, men were 40,870(71.5%). 50.3% of them were radiologic technologists, otherwise medical doctors(22.7%), nurse(2.9%) and others(24.1%). The average of depth radiation and surface radiation during the 5-year period were found to decrease each year. Both the depth radiation and surface radiation exposure were significantly higher in males, in older age groups, in radiological technologists of occupation. The departments of nuclear medicine had the highest exposure of both depth and surface radiation of the divisions of labor. There were 1.98 and 2.57 per 1,000 person-year were exposed more than 20 mSv(limit recommended by International Commission on Radiological Protection) in depth and surface radiation consequently. Conclusion: The total exposure per worker was siginifcantly decreased by year. But Careful awareness is needed for the workers who exposed over 20 mSv per year. In order to minimize exposure to radiation, each person engaged in a radiation-related industry must adhere to the individual safety management guidelines more thoroughly. In addition, systematic education and continuous guidance aimed at increasing the awareness of safety must be provided.

• Journal of Intelligence and Information Systems
• /
• v.17 no.4
• /
• pp.193-212
• /
• 2011

Mobile instant messaging service is surfacing to an important keyword in the mobile market together with popularization of Smart phones. Mobile instant messaging service in Korea has become popular to the degree of 87.9% usages from total Smartphone holders, and it is expected that using populations will be more enlarged afterwards if considering a fact that its populations of Smartphone is continuously being increased after exceeding 10 million persons (Trend Monitor, June 2011). In the instant messaging market where competitions have been deepened day by day, raising customer's royalties will be the key for company's business survivals and goals of corporate marketing strategies. It could be said that understanding on which factors affect to customer retentions and royalties is very important. Specially, as changing status is being progressed very quickly in case of innovative mobile services like the instant messaging service, research necessities on how many do consumers use the services after accepting them, how much do consumers use them variously, and whether does it connect to long-term relations have been increased, but studies on such matters are in insufficient situations actually. Therefore, this study examined on which effects were affected to use-diffusion and loyalty factors from perceived customer vales' factors having been occurred after accepting the mobile instant messaging service, namely 'functional value', 'monetary value', 'emotional value', and 'social value'. Also, the study looked into what kind of roles do the service usage and using variety play to service's continued using intents as a loyalty index, recommending intents to others, and brand switching intents. And then the study laid the main purpose in trying to provide implications for enhancing customer securities and royalties on the mobile instant messaging service through research's results. The research hypotheses are as follows; H1: Perceived values will affect influences to royalties. H2: Use-Diffusion will affect influences to loyalty. H3: Perceived value will affect influences to loyalty. H4: The use-diffusion will play intermediating roles between perceived values and loyalty. Total 276 cases among collected 284 ones were used for the statistical analysis by SPSS ver. 15 package. Reliability, Factor analysis, regression were done. As the result of research, 'monetary value' and 'emotional value' affected to 'usage' among perceived value factors, and 'emotional value' was appeared as affecting the largest influence. Besides, the usage affected to constant-using intents and recommending intents to others, and using varieties were displayed as affecting to recommending intents to others. On the other hand, 'Using' and 'Using diversity' were appeared as not affecting to 'brand switching intentions'. Meanwhile, as the result of recognizing about effects of perceived values on the loyalty, it was appeared such like 'continued using intents' affected to'functional value', 'monetary value', and 'social value' first, and also 'monetary value', 'emotional value', and 'social value' affected to 'recommending intents to others'. On the other hand, it was shown such like only 'social value' affected influences to 'brand switching intents', and thus contrary results with the factor 'constant-using intents' were displayed. So, it seems that there are many applications to service provides who are worrying about marketing strategies for making consumer retains (constant-using) and new consumer's inductions (brand-switching intents). Finally, as a result of looking into intermediating roles of the use-diffusion factor in relations between conceived values and royalties at hypothesis 4, 'using' and 'using diversity' were displayed as affecting significant influences all together. Regarding to research result's implications, for expanding and promoting continued uses of the mobile instant messaging service by service providers: First, encouraging recognitions on the perceived value connected to users' service usage are necessary. Second, setting up user's use-diffusion strategies are required so as to enhance the loyalty after understanding a fact that use-diffusion patterns affecting to the service's loyalty are different. Finally, methods of raising customer loyalties and making constant relationships have to be grouped by analyzing on what are the customer value's factors that can satisfy users in competitive alterations.

• 한국해양학회지
• /
• v.22 no.3
• /
• pp.130-142
• /
• 1987

Sedimentological characteristics of the surface sediments in the southern sea off Cheju Island are described from analyses of bottom sediments. The sediments are subdivided into seven textural classes, muddy sand, slightly gravelly muddy sand, sand, clayey sand, sandy clay, sandymud, silty sand. Sand-size sediments are distributed in the southeastern part and/or around the Island, whereas sandy and muddy sediments are mainly distributed in the central and southern parts of the study area. A small portion of mud patch is located in the southwestern part of the area. According to the textural parameters analysis, sediments in the study area are poorly sorted(av.2.52 ), positive skewed(av.1.61 ), leptokurtic(av.1.74 ), transported by saltation and/or suspension, and roundness of quartz is varied from angular to surrounded, which suggesting that the depositional environment is not simple. The calcium carbonate content is on the average 26.99%, and commonly abundant in sand-size sediments, whereas organic matter content in the bulk sediment is on the average 6.70% and usually dominant in fine-grained sediments.Light minerals consist of quartz(av56.01%),Na-Ca feldspar(av.6.15%),K-feldspar(av.9.22%) and rock fragments(av28.11%).The contect onquartz and K-feldspar increases continuously away from the Cheju Island. As a result of geochemical analysis,concentrations of the elements are as follow:Zn:19.42-43.52 ppm (av.30.67ppm),Mn:50-304 ppm(av139.39ppm),Cr:3.54-10.68ppm(av6.50ppm),Pb:5.52-41.68ppm(av.15.60ppm), Co:7.08-14.68ppm (av.10.78ppm),Ni:19.70-42.42ppm(av.29.57ppm),Cu:3.14-9.12ppm(av.5.14ppm),Fe:0.48-2.08% (av1.22%),Ca:0.32-13.16%(av6.60%),Al:0.06-0.08%(av.0.27%),Mg:0.12-0.76%(av.0.53%)na:0.11-0.51%(av.0.36%) Ag:0.48-4.08ppm(av.1.22ppm).Among these elements,the content of Zn,Cu,Cr,Mn,Fe,Al,Mg,Pb and Na increase toward the southwestern area,while the content of Ca and Ag SHOWS the reversed distribution trend.Such a distribution pattern seems to imply that spatial distrivution of heavy metals is closely related to the variation in grain size. X-ray diffractogram show that the minerals in clay from the southwestern mud patch are illite ,chlorite, kaolinte,feldspar and calcite.The bulk of illite in th mud zone is believed to be originated from Huanghe and Yangytze River.The mud patch in this region contains the diagnostic calcite peak,and the concentration of Ca,ni,Pb,Ag are similar to Huanghe type,which indicates that the greater part of these clay fractions may have been derived from the Huanghe River.

• Land and Housing Review
• /
• v.9 no.3
• /
• pp.1-8
• /
• 2018

In Europe and the United States, the use of limit states design has almost been established for pile foundation design. According to the global trend, the Ministry of Land, Transport and Maritime Affairs has established the basic design criteria of the bridge under the limit state design method. However, it is difficult to reflect on the design right now because of lack of research on resistance coefficient of the pile method and ground condition. In this study, to obtain the resistance coefficient of PHC bored pile which is widely used in Korea, the bearing capacity calculated by the LH design standard and the bridge design standard method, the static load test(21 times) and the dynamic load test(EOID 21 times, Restrike 21) The reliability analysis was performed on the results. The analysis of the resistance coefficient of PHC bored pile by loading test was analyzed by adding more than two times data. As a result, the resistance coefficient obtained from the static load test(ultimate bearing capacity) was 0.64 ~ 0.83 according to the design formula and the target reliability index, and the resistance coefficient obtained from the dynamic load test(ultimate bearing capacity) was 0.42~0.55. Respectively. The resistance coefficient obtained from the modified bearing capacity of dynamic load test(EOID's ultimate end bearing capacity + restrike's ultimate skin bearing capacity) was 0.55~0.71, which was reduced to about 14% when compared with the resistance coefficient obtained by the static load test(ultimate bearing capacity). As a result of the addition of the data, the resistivity coefficient was not changed significantly, even if the data were increased more than 2 times by the same value or 0.04 as the previous resistance coefficient. In conclusion, the overall resistance coefficient calculated by the static load test and dynamic load tests in this study is larger than the resistance coefficient of 0.3 suggested by the bridge design standard(2015).

• Korean journal of communication and information
• /
• v.45
• /
• pp.151-186
• /
• 2009

This article focuses on analysing and interpreting cultural imperialism issues that have long been debated. One of issues among them is related to the characteristics of international cultural fluid. What had been debated is that cultural imperialism has been ended or not and the debates were connected to the so called 'reverse cultural imperialism'. The other issue is about this fluid is the continuation of globalization or a part of localization and this is related to the phenomena of cultural homogenization or hybrid. General trend was that simplistic cultural imperialism which had been occurred during the 1970s and 1980s was no longer effective but global dominance by transnational global media is still strong and worldwide. Therefore my research interest is centered on how they look international cultural exchanges with regard to cultural imperialism. And is the framework of cultural imperialism thesis still effective tool in researching and analysing international cultural flows? How do we look globalization relating to international exchanges? Is globalization an another aspect of imperialism? In conclusion, international cultural fluid is not so simple. Like natural phenomena or human progress, a phenomenon is not consisted of a single factor or relation. Cultural fluid is a complex one mixed with various phenomena and relations. This is related to internal and external contradictions, internal and external dynamics of a society and nation, and social and cultural life of human beings. Recent research results show that globalization and localization are closely related to many country's programming schedule, and particular cultural interpretation of specific programmes and culture are adopted to the country's culture and patterns. Cultural fluid has both-sides. One the hand it has useful and positive sides and on the other hand it has harmful and negative aspects. Imperialistic factor, globalization, cultural homogenization or hybrid are all operated and functioned together in cultual fluid. It is difficult to say that cultural imperialism thesis has been ended because American and global media's dominance is still effective. What needed at this time for us is a complex and dynamic analysis of international cultural fluid instead of simplistic cultural imperialism.

• The Journal of the Petrological Society of Korea
• /
• v.11 no.1
• /
• pp.1-16
• /
• 2002

The study area is mostly composed of Precambrian Gyeonggi gneiss complex, Jurassic Daebo granites, Cretaceous tonalite and dykes, and so on. On the basis of field survey and mineral assemblage, the granites can be divided into three types; biotite granite (Gb), garnet biotite granite (Ggb) and two mica granite (Gtm). They predominantly belong to monzo-granites from the modes. Field relationship and K-Ar mica age data in the surrounding area suggest that intrusive sequences are older in order of Gtm, Ggb and Gb. Gb and Ggb, major study targets, occur as medium-coarse grained rocks, and show light grey and light grey-light pink colors, respectively. Mineral constituents are almost similar except for opaque in Gb and garmet in Ggb. Gb and Ggb have felsic, peraluminous, subalkaline and calc alkaline natures. In Harker diagram, both rocks show moderately negative trends of $TiO_2$, MgO, CaO, $Al_2O_3$, $Fe_2O_3$(t), $K_2O$ and $P_2O_5$ as $SiO_2$ contents increase. Among them, $TiO_2$, MgO and CaO show two linear trends. From the trends and the linear patterns in AFM, Sr-Ba and Rb-Ba-Sr relations, it is likely that they were originated from the same granitic magma and Ggb was differentiated later than Gb. REE concentrations normalized to chondrite value have trends of parallel LREE enrichment and HREE depletion. One data of Ggb showing a gradually enriched HREE trend may be caused by garnet accompaniment. Ggb have more negative Eu anomalies than Gb, suggesting that plagioclase fractionation in Ggb have occurred much stronger than that in Gb. In modal (Qz+Af) vs. Op, Gb and Ggb belong to magnetite-series and ilmenite-series, respectively. From the EPMA results, opaques of Gb are magnetite and ilmenite, and those of Ggb are magnetite-free ilmenite or not observed. Bimodal distribution of magnetic susceptibility reveals two different granites of Gb (332.6 ${mu}SI$) and Ggb (2.3 ${mu}SI$). Based on the paleomagnetic analysis as well as modal analysis, the main susceptibilities of Gb and Ggb reside in magnetite and mafic minerals, respectively. They belong to S-type granite of non-magnetic granite by susceptibility value. In addition, $SiO_2$ contents, $K_2O/Na_2O$, A/CNK molar ratio and ACF diagram support that they all belong to S-type granites.

• Journal of The Korean Association For Science Education
• /
• v.41 no.1
• /
• pp.33-46
• /
• 2021

Inquiry occupies an important place in science education, and research related to inquiry is widely conducted. However, due to the inclusiveness of the concept of "exploration," each researcher perceives its meaning differently, and approaches may vary. In addition, criticisms have been raised that the results of classes using inquiry in science education do not guarantee meaningful changes to students. Therefore, this study attempts to identify the trend of SSCI-level research papers dealing with inquiry in science education over the past three years to confirm the current status and effectiveness of the inquiry. Researches used in the analysis are International Journal of Science Education, Journal of Research in Science Teaching, Research in Science Education, and Science Education, and limited to those that directly suggest "inquiry (enquiry)" as a keyword. Based on extracted 75 papers, the classification process was conducted, and an analysis frame was derived inductively by reflecting the subject and characteristics. Specific cases for each category were presented by dividing into three aspects: perception and perspective on inquiry, support and strategy for inquiry, and teacher professional development for inquiry. The results of examining the implications for scientific inquiry are as follows: First, rather than defining inquiry as an implicit proposition or presenting it as a step-by-step procedure, it was induced to grasp the meaning of inquiry more comprehensively and holistically. Second, as to whether the inquiry-based instruction is effective in all aspects of the cognitive, functional, and affective domains of science, the limitations are clearly presented, and the context-dependent and subject-specific properties and limitations of inquiry are emphasized. Third, uncertainty in science inquiry-based instruction can help learners to begin their inquiry and develop interest, but in the process of recognizing data and restructuring knowledge, explicit and specific guidance and scaffolding should be provided at an appropriate timing.

• Journal of Korea Water Resources Association
• /
• v.46 no.8
• /
• pp.833-842
• /
• 2013

The quantile mapping is utilized to reproduce reliable GCM(Global Climate Model) data by correct systematic biases included in the original data set. This scheme, in general, projects the Cumulative Distribution Function (CDF) of the underlying data set into the target CDF assuming that parameters of target distribution function is stationary. Therefore, the application of stationary quantile mapping for nonstationary long-term time series data of future precipitation scenario computed by GCM can show biased projection. In this research the Nonstationary Quantile Mapping (NSQM) scheme was suggested for bias correction of nonstationary long-term time series data. The proposed scheme uses the statistical parameters with nonstationary long-term trends. The Gamma distribution was assumed for the object and target probability distribution. As the climate change scenario, the 20C3M(baseline scenario) and SRES A2 scenario (projection scenario) of CGCM3.1/T63 model from CCCma (Canadian Centre for Climate modeling and analysis) were utilized. The precipitation data were collected from 10 rain gauge stations in the Han-river basin. In order to consider seasonal characteristics, the study was performed separately for the flood (June~October) and nonflood (November~May) seasons. The periods for baseline and projection scenario were set as 1973~2000 and 2011~2100, respectively. This study evaluated the performance of NSQM by experimenting various ways of setting parameters of target distribution. The projection scenarios were shown for 3 different periods of FF scenario (Foreseeable Future Scenario, 2011~2040 yr), MF scenario (Mid-term Future Scenario, 2041~2070 yr), LF scenario (Long-term Future Scenario, 2071~2100 yr). The trend test for the annual precipitation projection using NSQM shows 330.1 mm (25.2%), 564.5 mm (43.1%), and 634.3 mm (48.5%) increase for FF, MF, and LF scenarios, respectively. The application of stationary scheme shows overestimated projection for FF scenario and underestimated projection for LF scenario. This problem could be improved by applying nonstationary quantile mapping.

• The KIPS Transactions:PartD
• /
• v.11D no.1
• /
• pp.183-194
• /
• 2004

The existing management job of research expenses has been divided into three parts： budget planning, budget draw-up, and exact settlement of budget. However, it caused some problems. Under this current circumstance it is required to obtain research expenses steadily, to operate efficiently and to use them clearly to solve such problems. As a result of a study on data warehouse development process of existing system integration company (Inmon, IBM) to reflect current trend described above, data warehouse development process of Inmon uses systematic and gradual access as a classical development cycle method. It causes overlap and feedback to the previous step in the process of each step Is requested. And another problem that it is difficult to toil what function refers and corrects data because functions and data are separated during performing development process at data warehouse development process of IBM is caused. Integrated management data warehouse development process of research expenses in the enterprise environment which applies UML at planning and analysis step, design step and implement and test step is suggested in this paper. Information retrieval agent uses existing budget plan DB, budget draw-up DB and budget settlement DB to find out information that a user wants to know. Information retrieval agent collects and saves information at integration database and information integration agent extracts, transports, transforms and loads the data. Information integration agent reduces a user's efforts to access to a number of information sources and check each of them. It also screens out data that a user may not need. As a result, integrated management data warehouse development process of research expenses in the enterprise environment reflects a user's requirements as much as possible and provides various types of information to make a decision which is needed to establish the policy of research expense management. It helps an end user approach his/her desired analysis information quickly and get various data from the comprehensive viewpoint rather than the fragmentary viewpoint. Furthermore, as it integrated three systems into one, it is possible to share data, to integrate the system, to reduce operating expenses and to simplify supporting environment for the decision making.