• ETRI Journal
• /
• 제36권1호
• /
• pp.99-105
• /
• 2014

This paper presents a new locomotion mode recognition method based on a transformed correlation feature analysis using an electromyography (EMG) pattern. Each movement is recognized using six weighted subcorrelation filters, which are applied to the correlation feature analysis through the use of six time-domain features. The proposed method has a high recognition rate because it reflects the importance of the different features according to the movements and thereby enables one to recognize real-time EMG patterns, owing to the rapid execution of the correlation feature analysis. The experiment results show that the discriminating power of the proposed method is 85.89% (${\pm}2.5$) when walking on a level surface, 96.47% (${\pm}0.9$) when going up stairs, and 96.37% (${\pm}1.3$) when going down stairs for given normal movement data. This makes its accuracy and stability better than that found for the principal component analysis and linear discriminant analysis methods.

• 한국정밀공학회지
• /
• 제15권9호
• /
• pp.68-74
• /
• 1998

The ESPI(Electronic Speckle Pattern Interferometry) is a real time, full-field, non-destructive optical measurement technique that allows static and dynamic deformation analysis and surface shape measurements of engineering structures. e .g. turbine blades. vehicle engine components, body panels, etc. This technique is very similar to holographic interferometry, but uses a solid static camera and an image processing board for recording and digital processing of speckle patterns. In this paper it is presented that FEM results for the free vibration of symmetrically laminated composite as [30/-30/90]s. The natural frequencies of laminated composite rectangular plates having the particular boundary condition are experimentally obtained. In order to demonstrate the validity of the experiment, FEM analysis using ANSYS was performed and natural frequencies experimentally obtained is compared with calculation by FEM analysis. The results obtained from both experiment and FEM analysis show a good agreement.

• 대한예방한의학회지
• /
• 제27권2호
• /
• pp.35-48
• /
• 2023

Objective : We studied prognostic biomarkers discovery for lung cancer based on the pattern identification for the personalized Korean medicine. Methods : Using 30 tissue samples, we performed a whole exome sequencing to examine the genetic differences among three groups. Results : The exome sequencing identified among 23,490 SNPs germline variants, 12 variants showed significant frequency differences between Xu and Stasis groups (P<0.0005). As similar, 18 and 10 variants were identified in analysis for Xu vs. Gentleness group and Stasis vs. Gentleness group, respectively (P<0.001). Our exome sequencing also found 8,792 lung cancer specific variants and among the groups identified 6, 34, and 12 variants which showed significant allele frequency differences in the comparison groups; Xu vs. Stasis, Xu vs. Gentleness group, and Stasis vs. Gentleness group. As a result of PCA analysis, in germline data set, Xu group was divided from other groups. Analysis using somatic variants also showed similar result. And in gene ontology analysis using pattern identification variants, we found genes like as FUT3, MYCBPAP, and ST5 were related to tumorigenicity, and tumor metastasis in comparison between Xu and Stasis. Other significant SNPs for two were responsible for eye morphogenesis and olfactory receptor activity. Classification of somatic pattern identification variants showed close relationship in multicellular organism reproduction, anion-anion antiporter activity, and GTPase regulator activity. Conclusions : Taken together, our study identified 40 variants in 29 genes in association with germline difference of pattern identification groups and 52 variants in 47 genes in somatic cancer tissues.

• 한국의류산업학회지
• /
• 제20권4호
• /
• pp.410-421
• /
• 2018

The study is designed to develop a educational basic pants patterns for men, and has been analyzed focusing on the university textbooks published since 2000. We also used CAD programs and virtual fitting programs to analyze the fitness of pants. To do this purpose, after choosing 7 Men's Wear textbooks, selected patterns were drawn and measured using PAD system and were compared and analyzed. Also, the appearance evaluation was examined through virtual fitting and then evaluated 21 male and female university students in their 20s. After supplementing the problems of the patterns in the existing textbooks, a pattern was developed and verified the fitness of the developed pattern. The results of comparing the proposed measurement items of each textbook for the pants pattern indicated a significant differences in terms of hip circumference of each pattern, which were between 96~105cm. A comparison of the drafting methods of each pattern showed the drafting methods for the crotch length, the front crotch extension, the back crotch extension were the difference. The results of appearance evaluation were pattern E presented the slimmest fit and pattern D presented the loosest fit. As a result of analysis of pants pattern, a waist circumference 82cm, a hip circumference 98cm, a crotch length 24cm, a pants length 104cm and a ham line width 46cm were most suitable. The development pattern was evaluated as superior to the existing pattern through the appearance evaluation of the virtual fitting.

• 패션비즈니스
• /
• 제26권5호
• /
• pp.36-48
• /
• 2022

This study aims to analyze the patterns made with knitted jacquard and intarsia techniques to provide essential data to help plan different knitwear designs using the techniques and patterns. Based on approximately 3,000 jacquard and intarsia knitwear published in the four significant womenswear collections over the past decade, eight main pattern types were classified, and each characteristic was analyzed. Firstly, it is a logo and symbol type pattern that appears mainly as a means of emphasizing a brand. Secondly, it is a traditional pattern with settled patterns from the past to the present. Third, it is a geometric pattern that appears both typically and atypically in various forms. Fourth, an abstract pattern type does not show a precise form or motif. Fifth, it is a colorful and diverse flower and plant pattern. Sixth, it is a landscape pattern that expresses nature and living space. Seventhly, it is an animal pattern type that expresses the appearance of an animal or the shape of the. Finally, it is a caricature pattern type using characters and various cartoonish motifs. Based on the analysis results of this study, creative and diverse design development of Jacquard and Intarsia knitwear and development of the knitwear market will take place.

• 대한한의학회지
• /
• 제33권4호
• /
• pp.1-8
• /
• 2012

Objectives: The purpose of this study was to specify major tongue diagnostic indicators and evaluate their significance in discriminating pattern identification subtypes in stroke patients. Methods: This study used a community based multi-center observational design. Participants (n=1,502) were stroke patients admitted to 11 oriental medical university hospitals between December 2006 and February 2010. To determine which tongue indicator affected each pattern identification, a decision tree analysis of the chi-square automatic interaction detector (CHAID) algorithm was performed. The chi-squared test was used as the criterion in splitting data with a p-value less than 0.05 for division, which is the main procedure for developing a decision tree. The minimum sample size for each node was specified as n =10, and branching was limited to two levels. Results: From the 9 tongue diagnostic indicators, 6 major tongue indicators (red tongue, pale tongue, yellow fur, white fur, thick fur, and teeth-marked tongue) were identified through the decision tree analysis. Furthermore, each pattern identification was composed of specific combinations of the 6 major tongue indicators. Conclusions: This study suggests that the 6 tongue indicators identified through the decision tree analysis can be used to discriminate pattern identification subtypes in stroke patients. However, it is still necessary to re-evaluate other pattern identification indicators to further the objectivity and reliability of traditional Korean medicine.

• 한국의상디자인학회지
• /
• 제13권4호
• /
• pp.93-110
• /
• 2011

This study investigates the analysis on the acceptance of Foreign Fashion trends in Korean Fashion Collection by collections, years, season, and designers. The purpose of this study is Korean collection's degree to adopt and receive foreign collections, by comparative analysis of design features between Seoul and foreign collections. For such purpose, from 2006 S/S to 2011 F/W, 5185 pictures were collected from designer's photos of Seoul, Paris, Milan, NY, and London collections. The content analysis and statistical analysis using SPSS will be conducted for data analysis. The results of the research are as follows. First, regarding the design features, square-form silhouette, achromatic colors, and none pattern were presented as well. Second, there were significant differences in the design characteristics of each year. Particularly, in 2008, X-form silhouette, Yellow and Green color, and flower pattern were emphasized. Third, the design features by season were significant differences. In S/S season, square-form and X-form silhouette, achromatic colors of white and gray color, none pattern were evident while in F/W season, square-form Silhouette, achromatic colors of black and gray, and none pattern were emphasized. Fourth, the design features by designer are as follows. In terms of form, Seoul collection was influenced by Paris collection. In terms of colors, it was influenced by NY and London collections.

• 한국정보전자통신기술학회논문지
• /
• 제10권6호
• /
• pp.594-600
• /
• 2017

본 논문에서는 매우 높은 차원을 가진 데이터에서 의미 있는 특징 벡터 추출하여 입력 공간의 차원을 줄이기 위하여 주성분 분석법을 사용하였다. 주성분 분석법을 이용하여 축소된 차원을 가진 입력 데이터를 이용하여 회귀 다항식의 입력벡터로 사용하는 모델과 패턴 분류기의 설계 방법을 제안하였다. 제안된 모델 및 패턴 분류기는 매우 단순한 구조를 가진 회귀다항식을 기반으로 설계하여 모델 및 패턴 분류기의 과적합 문제를 해결 하고자 하였다. 제안된 설계방법을 적용하여 설계된 모델과 패턴 분류기의 성능을 비교 및 평가하기 위하여, 다양한 기계 학습 데이터 집합을 사용하였다.

• 한국IT서비스학회지
• /
• 제17권1호
• /
• pp.135-153
• /
• 2018

E-Card Service for Child Nutrition Program is one of the main public policy services nowadays. In case of inconvenience during the use of the e-cards, it is recommended to cooperate with related organizations in order to promptly handle and provide guidance, and thoroughly manage child feeding service such as hygiene, nutrition and kindness etc. To do so, it is very important to provide food service that meets local actual conditions and children's needs in a cost effective manner for the underage who are worried about the poorly-fed by understanding the pattern of child feeding e-card service. Hence. this paper aims to investigate how child feeding e-card service efficiently provides meals according to the local situation and children's needs through big data analysis and to propose a method of identifying welfare conditions according to the purpose of service with actual application examples. The results suggest that, first of all, this study is able to judge appropriateness of public institution's policy in a timely and repetitive manner through non-standard data analysis such as Naver News and transaction data. Secondly, this paper proposes a multi-layered analysis framework, which performs online open data analysis to detect policy issues, visualizes retrieval and preprocessing of real data, and performs abnormal pattern recognition. These will be worthy of reference to other similar projects.

• 대한전자공학회논문지SP
• /
• 제43권2호
• /
• pp.82-86
• /
• 2006

패턴인식 시스템은 일반적으로 데이터의 전처리, 특징 추출, 학습단계의 과정을 거쳐서 개발되어 진다. 그중에서도 특징 추출 과정은 다차원 공간을 가진 입력 데이터의 복잡도를 줄여서 다음 단계인 학습단계에서 계산 복잡도와 인식률을 향상시키는 역할을 한다. 패턴인식에서 특징 추출 기법으로써 principal component analysis, factor analysis, linear discriminant analysis 같은 방법들이 널리 사용되어져 왔다. 이 논문에서는 singular value decomposition (SVD) 방법이 패턴인식 시스템의 특징 추출과정에 유용하게 사용될 수 있음을 보인다. 특징 추출단계에서 SVD 기법의 유용성을 검증하기 위하여 원격탐사 응용에 적용하였는데, 실험결과는 널리 쓰이는 PCA에 비해 약 25%의 인식률의 향상을 가져온다는 것을 알 수 있다.