• Nuclear Engineering and Technology
• /
• v.38 no.3
• /
• pp.277-284
• /
• 2006

In order to ensure the structural integrity of nuclear welded structures during design life, the fatigue life has to be evaluated by fatigue analysis procedures presented in technical codes such as ASME B&PV Code Section III. However, existing fatigue analysis procedures do not explicitly consider the presence of welded joints. A new fatigue analysis procedure based on a structural stress/fracture mechanics approach has been recently developed in order to reduce conservatism by erasing uncertainty in the analysis procedure. A recent review of fatigue crack growth data under various mean loading conditions using the structural stress/fracture mechanics approach, does not consider the mean loading effect, revealed some significant discrepancies in fatigue crack growth curves according to the mean loading conditions. In this paper, we propose the use of the stress intensity factor range ${\Delta}K$ characterized with loading ratio R effects in terms of the structural stress. We demonstrate the effectiveness in characterizing fatigue crack growth and S-N behavior using the well-known data. It was identified that the S-N data under high mean loading could be consolidated in a master S-N curve for welded joints.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.20 no.7
• /
• pp.2289-2297
• /
• 1996

Flows in the combustion chamber near the spark plug are measured using LDv.A single cylinder DOHC S.I. engine of compression ratio 9.5:1 with a transparent quartz window piston is used. Combustion chamber shape is semi-wedge type. Measured data are analyzed using the ensemble averaged analysis and the cycle resolved analysis which uses FFT Filtering. Turbulent intensity and mean velocity are studied in the main flow direction and the normal to main flow direction as a function of engine speeds. The results shows that the turbulent intensity obtained by the ensemble averaged analysis is greater than that calculated by the cycle resolved analysis. Especially, the ensemble averaged analysis shows increase in turbulence at the end of compression stroke although the cycle resolved analysis shows increase only in the cycle-by-cycle variation with no noticeable increase in turbulence. The mean velocity in the main flow direction increase as engine speed increase. But the mean velocity normal to the main flow does not show such increase. Turbulent intensity in both direction increase in proportion to engine speeds. The magnitude of turbulent intensity is about 0.3 ~ 0.4 times the mean piston speeds at the end of the compression stroke.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.51 no.3
• /
• pp.53-62
• /
• 2009

This study was carried out to select optimal probability distribution based on design accumulated monthly mean inflow from the viewpoint of drought by Gamma (GAM), Generalized extreme value (GEV), Generalized logistic (GLO), Generalized normal (GNO), Generalized pareto (GPA), Gumbel (GUM), Normal (NOR), Pearson type 3 (PT3), Wakeby (WAK) and Kappa (KAP) distributions for the observed accumulative monthly mean inflow of Chungjudam. L-moment ratio was calculated using observed accumulative monthly mean inflow. Parameters of 10 probability distributions were estimated by the method of L-moments with the observed accumulated monthly mean inflow. Design accumulated monthly mean inflows obtained by the method of L-moments using different methods for plotting positions formulas in the 10 probability distributions were compared by relative mean error (RME) and relative absolute error (RAE) respectively. It has shown that the design accumulative monthly mean inflow derived by the method of L-moments using Weibull plotting position formula in WAK and KAP distributions were much closer to those of the observed accumulative monthly mean inflow in comparison with those obtained by the method of L-moment with the different formulas for plotting positions in other distributions from the viewpoint of RME and RAE.

• Journal of Digital Convergence
• /
• v.19 no.12
• /
• pp.339-345
• /
• 2021

In this paper, estimation angle performance analysis of amplitude-comparison monopulse radar under additive noise effect is dealt with. When uncorrelated white noises are added to the squinted beams, the angle estimation performance is analyzed through the mean square error(MSE). The numerical integration-based mean square error result completely overlaps the Monte Carlo-based mean square error result, which corresponds to 99.8% of the Monte Carlo-based mean square error result. In addition, the mean square error analysis method based on numerical integration has a much faster operation time than the mean square error method based on Monte Carlo. the angle estimation performance of the amplitude comparison monopulse radar can be efficiently analyzed in various noise environments through the proposed numerical integration-based mean square error method.

• Journal of Korean Institute of Industrial Engineers
• /
• v.24 no.4
• /
• pp.639-647
• /
• 1998

We consider a multiclass production system processed by a single machine with cyclic order. Each part belongs to one of several classes and arrives at each queue in a Poisson process. The processing discipline at each queue is either exhaustive or gated. We introduce a new approach to analysis of mean waiting times for each queue. We formulate mean waiting times as cost functions on state of the system. The mean waiting times are obtained by solving a set of O($J^2$) linear equations, where J is the number of queues in the system. We also obtain the mean number of parts of each queue in the system at an arbitrary time. Based on this result, we plot the numerical values of the mean waiting times for several parameter settings.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.53 no.6
• /
• pp.43-50
• /
• 2011

The fractal method has recently been applied to a model for determining soil grain size distribution. The objective of this study is to review the applicability of the fractal method for a analysis of submarine sedimentary environments by comparing fractal constants with grain size statistical analysis for the soil samples of Pohang (PH) and Namhae (NH). The y-interception of log (grain size)-log (passing) equation was also used because grain size distribution couldn't be expressed with fractal dimension only. The result of comparison between fractal constants (dimension, y-interception) and grain size statistical indices, the fractal dimension was directly proportional to the mean and the sorting. And the y-interception showed high correlation with the mean. The fractal dimension and y-interception didn't show significant correlation with the skewness and the kurtosis. Thus regression equations between fractal constants and two statistical indices (mean, sorting) were derived. All classifications of the mean and the sorting could be determined using the regression equation based on the fractal dimension and y-interception. Therefore, fractal constants could be used as an alternative index representing the sedimentary environments instead of the mean and sorting.

• Journal of Oral Medicine and Pain
• /
• v.19 no.2
• /
• pp.47-55
• /
• 1994

To investigate the reliability and reproducibility of the computerized cephalometric analysis system, se compared the differences of the 10 linear and 13 angular measurements by manual works and the use of computerized cephalometric analysis system. We obtained as follows : 1. There was not significant difference between maean values of 22 manual and computerized measurements. 2. There was not significant difference between mean differences of manual and computerized cephalometric analysis data taken by same examiner except facial depth, facial length and posterior facial height. 3. There was not significant difference between mean differences of two trials of the computerized cephalometric analysis data by same examiner in all measurements. 4. There was not significant difference between mean differences of the computerized cephalometric analysis data by two examiners except FMIA and IMPA. According to this result, we guess the use of computerized cephalometric analysis system is useful on diagnosis and treatment planning of othodontic patients.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.05a
• /
• pp.1026-1031
• /
• 2002

This paper shows the effect of mean flow in duct. The potential equation of duct with mean flow is obtained. A finite element method(FEM) is used to predict acoustic performance of duct with mean flow. The formulation of the finite element method is derived for duct taking into consideration of the convective effect of mean flow. A simple duct, simple expansion chamber and a duct with resonator are implemented to show the effects of the mean flow.

• Journal of Korean Academy of Fundamentals of Nursing
• /
• v.1 no.2
• /
• pp.149-164
• /
• 1994

This stidy was carried out for purpose of investigating the degree of perception in the First clinical practice. The data of this study were collected by self-reported questionnaire composed of 5point rating scale measure the ideal level, satisfaction level and Stress level. For the analysis of the data, percentage, MANOVA, ANOVA and Scheffe test were 216 nursing students in 1 Junior College and 2 university in Taegu. Data was administrated from October 4 through 13, 1994 The results were as follow : 1. The average mean Score for the ideal level was 3.91 with a maximum possible score 5points. The highest mean score was infection controll 4.40 and the lowest mean score was comfort measure 3.44. The average mean score for the satisfaction level was 3.33 with a maximum possible score 5points. The highest mean score was Medication 3.54 and the lowest mean score was communication 3.01. The average mean score for stress level was 3.10 with a maximum possible score 5points. The highest mean score was spiritual and psychological care 3.45, the lowest mean score was Temperature controll 2.51. 2. In the analysis of the relationship between the ideal level, Satisfaction level and Stress level, no significant differance was found in college and university, religion, admission, satisfaction, health, economy, parent 3. In the analysis of the relationship between the ideal level, satisfaction level, stress level and general characteristics, significant difference was found in economicststus in the ideal level. Significant difference was found in economic status(upper class, middle class)in Scheffe test of the ideal level.

• The Korean Journal of Applied Statistics
• /
• v.34 no.2
• /
• pp.255-266
• /
• 2021

The purpose of this study is to compare the effects of treatment on stage III stomach cancer data obtained from the SEER program of the National Cancer Institute and to identify the significant risk factors for the survival rates of stage III stomach cancer. Since the proportional hazards assumption was violated for treatment, we used the restricted mean survival time as an alternative to the proportional hazards model. The restricted mean survival time was estimated using pseudo-observations, and the effects of treatment were compared using a test statistic based on the estimated restricted mean survival times. We conducted the regression analysis using a generalized linear model to investigate the significant predictors for the restricted mean survival time of patients with stage III stomach cancer. We found that there was a significant difference between the restricted mean survival times of treatment groups. Age at diagnosis, race, substage, grade, tumor size, surgery, and treatment were significant predictors for the restricted mean survival time of patients with stage III stomach cancer. Surgery was the most significant predictor for increasing the restricted mean survival time of patients with stage III stomach cancer.