• 산업경영시스템학회지
• /
• 제27권4호
• /
• pp.83-89
• /
• 2004

In this paper MIP(mean inventory period) Model and OMMIP decision flow have been developed. MIP model can calculate mean inventory period which is subject to the order quantity alternative plan. OMMIP decision flow leads how can decide the most minimized order quantity in mean inventory period among various order quantity alternatives. This paper also suggests how to select the order quantity with minimum inventory period as optimal order quantity by means of comparison each mean inventory period with other mean inventory period, after simulating EOQ and order quantity of OMMIP calculated in MIP model.

• 한국수자원학회논문집
• /
• 제33권1호
• /
• pp.15-30
• /
• 2000

본 연구는 소규모 저수지의 위험도와 초기저수지 수위와의 관계를 설정하기 위하여 신뢰도 분석기법을 적용하였다. 저수지의 안전성을 평가하기 위해서는 변수들의 불확실성을 파악하여야 하며 기능 수행함수를 설정하여야 한다. 저수지의 위험도를 산정하는 절차는 우선 월류에 대한 기능수행함수의 위험도 기준을 설정한 후 변수들의 불확실성을 파악하고 적정한 신뢰도 분석기법에 의하여 위험도를 산정하게 된다. 적용된 신뢰도 분석기법은 MCS(Monte Carly simulation) 법과 MVFOSM (mean value first order second momet) 법이며 이를 이용하여 저수지의 위험도를 산정하였다. 이에 따라 설계 재현기간에 따른 위험도-초기 저수지 수위의 관계를 설정하였으며 이는 저수지의 운용에 유용하게 사용될 것으로 생각된다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제25권6호
• /
• pp.1195-1202
• /
• 2001

The flow characteristics in a bifurcated duct are investigated experimentally. Physical properties such as mean velocity vectors, mean x-y stress distributions, mean vorticity and total pressure distributions are Obtained for three different Reynolds numbers(578, 620, 688) Using PIV measurements and CFD analysis. Also, three different rates of discharge Q=26.11 l/min, Q=28.11 $\ell$/min, Q=31.17 $\ell$/min) were selected foy experimental conditions. The results of this study would be useful to the engineer in designing the flow systems for heating, ventilation, air conditioning and wastewater purification plants.

• 설비공학논문집
• /
• 제19권11호
• /
• pp.761-769
• /
• 2007

The purpose of this study is to present a simplified model of predicted mean vote (PMV) using multiple regression analysis. We performed the experiments and the numerical calculations in the lecture room during summer and winter to simplify PMV. And the multiple regression analysis on PMV was conducted to estimate the contribution of independent variables toward PMV. From the multiple regression analysis, we found that the effect of independent variables on PMV followed in order, clo value>air temperatur>air velocity>mean radiant temperature>relative humidity. And the simplified PMV was proposed through a few assumptions and then was compared with original PMV. They had a good agreement with each other. Additionally, we compared the simplified PMV with EDT. We expected that the simplified PMV can be more useful than EDT to evaluate the thermal comfort in the place, where radiation is dominant. But the comfort range of the simplified PMV should be adjusted to predict the exact thermal comfort in the future.

• Journal of Korean Neurosurgical Society
• /
• 제30권2호
• /
• pp.201-206
• /
• 2001

Objective : The purpose of this study was to assess the complications, duration of admission, cost effectiveness, radiologic stabilization of the anterior cervical bone fusion in the treatment of cervical disc disease with and without plating. Materials and Methods : Fifty-two surgically treated patients for cervical disc disease were reviewed. Group I consisted of consecutive treated patients with iliac auto-bone graft without instrumentation after anterior cervical discectomy. Group II consisted of consecutive treated patients with iliac autologous-bone graft with CASPER cervical plate fixations. Radiologic fusion was decided when loss of end plate boundary between graft bone and vertebral body and immobile, maintenance of the disc space were evident on simple dynamic plain films. The patients were discharged after the stabilization of cervical motion by films was of tained. These groups were analysed multiple variably with Mann-Whitney U-test. Results : Group I consisted of 18 patients, group II consisted of 34 patients. Mean age was $49.0{\pm}8.1years$, mean duration of admission was $17.27{\pm}10.51days$, mean costs for treatment was $1,970,000{\pm}475,000won$. In group I, mean age was 47.7(34-60) years, 16 patients had undergo on one-level operation, 2-patients had undergo on two-level operation, mean duration of admission was $28.7{\pm}10.4days$, mean costs for treatment was $2,194,473{\pm}561,639won$. The periods of stabilization was $6.6{\pm}3.36weeks$ on radiologic study. Mean periods of out patient follow up was 16.8(6-64) weeks after discharge. Mean period of radiologic follow up was 17.3(4-6) weeks after surgical operation. In group II, mean age was 49.7(37-62) years and 18 patients one-level operation, 14- patients had undergo on two-level operation and 2-patients three-level operation. Mean duration of admission was $11.24{\pm}3.29days$, mean costs for treatment was $1,850,823{\pm}389,372won$. The periods of stabilization was $5.88{\pm}7.07weeks$ on radiologic study. Mean period of out patients follow up was 16.7(4-60) weeks after discharge. Mean period of radiologic follow up was 12.4(3-52) weeks after surgical operation. The duration of admission showed statistical significance in Group II but other items showed no significant difference between two groups. Conclusions : The more economic, early life return and effective method of cervical disc disease in our series were evident in patients who had undergone, iliac bone graft and plate fixations after anterior discectomy.

• Structural Engineering and Mechanics
• /
• 제53권5호
• /
• pp.1051-1066
• /
• 2015

The study aims on the effect of material dependency in elastic- plastic contact models by contact analysis of sphere and flat contact model and wheel rail contact model by considering the material properties without friction. The various materials are selected for the analysis based on Young's modulus and yield strength ratio (E/Y). The simulation software 'ANSYS' is employed for this study. The sphere and flat contact model is considered as a flattening model, the stress and strain for different materials are estimated. The simulation of wheel-rail contact model is also performed and the results are compared with the flattening model. The comparative study has also been extended for finding out the mean contact pressure for different materials the E/Y values between 150 and 660. The results show that the elastic-plastic contact analysis for materials up to E/Y=296.6 is depend on the nature of material properties and also for this material the mean contact pressure to yield strength reaches 2.65.

• Earthquakes and Structures
• /
• 제10권1호
• /
• pp.105-123
• /
• 2016

In this paper, using the probabilistic methods, the seismic demand of buckling restrained braced frames subjected to earthquake was evaluated. In this regards, 4, 6, 8, 10, 12 and 14-storybuildings with different buckling restrained brace configuration (including diagonal, split X, chevron V and Inverted V bracings) were designed. Because of the inherent uncertainties in the earthquake records, incremental dynamical analysis was used to evaluate seismic performance of the structures. Using the results of incremental dynamical analysis, the "capacity of a structure in terms of first mode spectral acceleration", "fragility curve" and "mean annual frequency of exceeding a limit state" was determined. "Mean annual frequency of exceeding a limit state" has been estimated for immediate occupancy (IO) and collapse prevention (CP) limit states using both Probabilistic Seismic Demand Analysis (PSDA) and solution "based on displacement" in the Demand and Capacity Factor Design (DCFD) form. Based on analysis results, the inverted chevron (${\Lambda}$) buckling restrained braced frame has the largest capacity among the considered buckling restrained braces. Moreover, it has the best performance among the considered buckling restrained braces. Also, from fragility curves, it was observed that the fragility probability has increased with the height.

• 한국수학교육학회지시리즈A:수학교육
• /
• 제45권2호
• /
• pp.155-163
• /
• 2006

In this paper, we focus on the analysis of the results of CAS-K (Creative Attitude Scale-Korea) including 33 items of 7 factors. Using the analysis gives us the information about students' creative attitude for each factor. We introduce three methods of the analysis about the results of CAS-K; total scores analysis, mean value of each factor analysis, and CAS-K map analysis. We develop the CAS-K map based on the mean value of each factor and three categories of factors. These categories are divergent attitude (fluency, appropriateness), problem solving attitude (positiveness, independency, concentration), and convergent attitude (convergency, accuracy). This analysis of the results of CAS-K can be a source of creative attitude to foster mathematical creativity.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2008년도 추계학술대회 논문집
• /
• pp.259-262
• /
• 2008

This paper introduces a simplified method to consider forming effects in a car crash analysis. Representative value was used to consider forming effects simply. Four representative values, which are the mean value of thicknesses and effective plastic strains at nodes, the median of thicknesses and effective plastic strains at nodes, were evaluated. A crash analysis of a front side member shows that analysis results from the suggested methods are similar to those from the conventional method to consider forming effects. Use of the mean effective plastic strain shows the best results. A car crash analysis for a ULSAB/AVC model under the condition of US SINCAP were carried out to demonstrate the validity of the suggested method. Analysis results show that the error of suggested method is less than 1.5%.

• Annals of Clinical Neurophysiology
• /
• 제4권2호
• /
• pp.108-113
• /
• 2002

Background and Objective : Carpal tunnel syndrome (CTS) is the most common mononeuropathy encountered in clinical practice. No single procedure or group of procedures has demonstrated adequate sensitivity. F-wave study in CTS is very rarely reported. To determine the diagnostic usefulness of new parameters of F-wave and comparative study of F-wave parameters of median and ulnar nerves in patients with CTS. Methods : F-wave responses of median and ulnar nerves were analyzed from 27 patients with clinically diagnosed CTS and 22 age and gender-matched normal control. Conventional F-wave parameters were studied. Also, the usefulness of new parameters such as mean and maximal ulnar-median F-wave latency differences, ulnar-median F-wave persistence and chronodispersion differences, median/ulnar F-wave amplitude ratio, and F-wave conduction velocity (FCV) using mean and maximal latency were assessed. Results : Compared with controls, median F-wave minimal, maximal and mean latencies, mean F-wave amplitude/M-wave amplitude, minimal, mean and maximal ulnar-median F-wave latency differences, and FCVs using minimal, maximal and mean latency were significant (P<0.05~0.001). Median F-wave minimal, maximal and mean latencies, mean ulnar-median F-wave latency difference, and FCVs using minimal, maximal and mean latency showed high sensitivity and specificity. Mean ulnar-median F-wave latency difference and FCVs using maximal and mean latency were new parameters. Conclusion : New F-wave parameter including mean ulnar- median F-wave latency difference and FCVs using maximal and mean latency may be a useful to assess the CTS. Also, median F-wave minimal, maximal and mean latencies, and FCV using minimal latency may be included in routine diagnostic tests in CTS.