• Science of Emotion and Sensibility
• /
• v.3 no.2
• /
• pp.75-84
• /
• 2000

문명의 발달과 함께 수면부족으로 인한 여러 가지 스트레스와 질환이 증가하게 되어 최근 수면연구에 대한 관심이 증가하고 있다. 본 연구는 다양한 온열환경 조건에서의 쾌적한 수면을 위한 온열환경을 제시하기 위해, 5명의 여성 피험자를 대상으로 22$^{\circ}C$, 26$^{\circ}C$, 3$0^{\circ}C$의 일정온도 조건과 $25^{\circ}C$에서 1시간 후와 2시간 후에 각각 1, 2$^{\circ}C$를 상승시켜주는 변동온도 조건하에서 수면생리신호를 측정하였다. 그리고, 수면단계 평가를 이용하여 총 수면시간, 깊은 수면의 비율, 그리고 최초 수면시작 시간에서 최초의 서파 수면이 나타나기까지의 지연시간 등의 수면효율을 평가하였다. 그 결과, 일정온도 조건에서는 26$^{\circ}C$에서 총 수면시간(466.7$\pm$10.25분)과 깊은 수면의 비율(33.1$\pm$4.95%)은 타 조건에 비해 높게 나타났고, 최초 서파수면까지의 지연시간(9.8$\pm$3.33분)은 타 조건에 비해 낮게 나타나 쾌적한 수면을 위한 가장 적절한 온열조건임을 관찰할 수 있었다. 그리고 변동온도 조건에서는 4가지 온열조건간에는 큰 차이가 나타나지 않았지만, 모든 조건에서 일정온도 조건보다는 좋은 결과를 나타내었다. 또한 수면 중 신체 움직임과 설문 분석에서도 동일한 결과를 보였다. 본 연구를 통해, 수면생리신호를 이용한 수면 쾌적성 분석은 수면의 질적인 상태를 관찰하는데 매우 적합한 파라메터를 도출할 수 있으며, 여러 가지 수면환경 조건을 평가하는데 매우 유용한 지표가 될 수 있음을 보였다.e results suggest that hCG treatment at 7 days after insemination could be used to increase the pregnancy rate of embryo transfer, and transfer, and only the recipients with PUN concentration of <12 mg/dl were influenced by treatment with hCG./TEX>이었으며, 이는 화성 기원을 지시한다.sucrose를 이용한 2단계 희석이 수정란의 생존성을 향상시키는 것으로 나타났다. 또한 발육 단계별 생존성에 있어서는 발육이 진전된 확장배 반포 시에 동결하는 것이 배반포기에 동결하는 것 보다 유리한 것으로 나타났다.ody를 사용하여 flow cytometery해석을 실시하는 한편 125I-hGH binding assay에 의하여 hGH binding activity를 측정하였다. 최종적으로 GH signal transduction의 target genedf으로 알려져 있는 serine protease inhibitor 2.1(Spi 2.1) gene의 promotor activity를 검토한 결과 hGHR을 transfect한 CHO Cell에 있어서 hGH의 농도에 의존적으로 증가되었다. 따라서 본 실험에서 cloning한 cDNA hGHR는 native hGHR와 같은 기능을 가지는 것으로 판명되었다.것으로 판명되었다..ments of that period left both in Japan and Korea. "Hyojedo" in Korea is supposed to have been influenced by the letter design. Asite- is also considered to

• Journal of Fashion Business
• /
• v.9 no.4
• /
• pp.59-78
• /
• 2005

This study aims to know the deferences of hair fashion feeling group in accordance with hair styling activities, general characteristics, life styles objecting to capital area university women students and aid to hair fashion design. So the results are as belows. 1. Frequency Analysis of Categories A. Hair fashion feeling - Natural, sexy, romantic pretty, sophisticate, ethnic are 90% in total hair fashion feeling variables in sequence of frequency, so it can be said these are in vogue. B. Hair styling activities - The objections visit the hair salon once 1-2months, spend about 42,000 won a month, perform cut & wave perm to sentimental reasens & hair style changes, determine the hair style well coordinated in her image and managed easily. In her home, they manage her hair style 12 minutes a day, spend 17,000 won to buy hair aids, do hair blow dry or pin or pony tail mainly in the morning, scarcely use the hair styling aids but if use, essence or wax mainly. And the degree of interest to hair style is high. C. General Characteristics - The objections's average age is 21.1, residence is seoul kangnam 23.3%, seoul kangbook 18.4%, other capital areas 58.4%, the degree of education is university students 94.9%, graduated student 5.1%, marriage is married 96%, unmarried 2.8%, family who live with is married are mainly man & woman and living with father & mother in low in man's, unmarried are mainly live alone & nuclear family, personal expenses a month is 300,000 won in average, income of home is 4,000,000 won a month. D. Life style - The objections are not in interest of physical exercises but if are, do yoga & health, like drama & comedies program, watch TV or meet friend in leisure time, like balad & dance music, fashion magazine, meet friend in cafe or college. 2. Relationship of hair fashion feeling & other variables Using the $x^2$-test, level p<0.05, Hair styling activities(frequency of hair salon coming in and out, ordinary time representing hair style, preferred hair styling aids, the amount of hair style interest), General Characteristics(age), Life style(leisure time) variables are meaningful.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.12 no.1
• /
• pp.1-13
• /
• 1994

The terrestrial phetogrammetry has the relative convenience of selecting the site of photo station in contrast with the aerial photogrammetry, and the flexibility in accuracy prediction of object point positioning. So it has the advantage in designing optimum photo taking system which can fulfill the required accuracy. For the convergent photos which are frequently used for the monitoring of cultural assets and ground facilities, almost all of the traditional studies for the optimum photo condition, both in theoretical or experimental, are basically depend on the symmetrical configuration at the normal direction to the center of the object. However, in many cases the surroundings of the object do not allow the normal photo direction or sufficient convergent angle, even more the object features are not always be seen as one panel like planar. In this paper, the accuracy variation of convergent photos for the multi-planar objects, which are composed by some orthogonal planes, are investigated to establish the optimum photo condition. The results of the accuracy analysis for the photo direction, convergent angle, as well as the object feature are expected to be utilized in system design of geometric configuration of convergent photos, which are adequate for the accurate monitoring of the objects, such as culural assets, facilities, precision instruments, deformation surveying, etc.

• Journal of the Korean Geotechnical Society
• /
• v.33 no.10
• /
• pp.25-31
• /
• 2017

The buffer is one of the major components of an engineered barrier system (EBS) for the disposal of high-level radioactive waste (HLW). As the buffer is located between a disposal canister and host rock, it is indispensable to assure the disposal safety of high-level radioactive waste. It can restrain the release of radionuclide and protect the canister from the inflow of groundwater. Since high quantity of heat from a disposal canister is released to the surrounding buffer, thermal properties of the buffer are very important parameters for the analysis of the entire disposal safety. Especially, temperature criteria of the compacted bentonite buffer can affect the design of HLW repository facility. Therefore, this paper investigated thermal properties for the Kyungju compacted bentonite buffer which is the only bentonite produced in South Korea. Hot wire method and dual probe method were used to measure thermal conductivity and specific heat capacity of the compacted bentonite buffer according to the temperature variation. Thermal conductivity and specific heat capacity were decreased dramatically when temperature variation was between $22^{\circ}C{\sim}110^{\circ}C$ as degree of saturation decreased according to the temperature variation. However, there was little variation under the high temperature condition at $110^{\circ}C{\sim}150^{\circ}C$.

• Journal of the Korean Ceramic Society
• /
• v.40 no.10
• /
• pp.961-966
• /
• 2003

A Multi-Layer Ceramic (MLC) chip type Band-Pass Filter (BPF) using BiNb$\_$0.975/Sb$\_$0.025/ $O_4$ LTCC (Low Temperature Co-fired Ceramics) and MLC processing is presented. The MLC chip BPF has the benefits of low cost and small size. The BPF consists of coupled stripline resonators and coupling capacitors. The BPF is designed to have an attenuation pole at below the passband for a receiver band of IMT-2000 handset. The computer-aided design technology is applied for analysis of the BPF frequency characteristics. The attenuation pole depends on the coupling between resonators and the coupling capacitance. An equivalent circuit and structure of MLC chip BPF are proposed. The frequency characteristics of the manufactured BPF is well acceptable for IMT-2000 application.

• Journal of the Korean GEO-environmental Society
• /
• v.13 no.4
• /
• pp.13-26
• /
• 2012

The deformation modulus of rock masses is a very important design factor for the computation of stability of tunnels and their support systems. Several empirical formulas to estimate the deformation modulus using simple rock classification methods such as RQD or RMR are widely used because field tests to evaluate the deformation modulus are very expensive and time consuming work. However, these formulas can be depended on experiences from the characteristics of local sites in each country. So it is possible that there might be limitations to estimate appropriate deformation modulus in South Korea using the empirical formulas. Therefore, in this study, the applicability of empirical formulas was analyzed by comparing estimated value with the measured value from eight sites in South Korea. The results show that the estimated value based on the empirical formulas partially have tendency to overestimate. Especially, in case of sedimentary rocks, it was too difficult to apply to the empirical formulas because there was no relation ship between estimated value and measured value. For these reasons, additional data from many tests and accurate analyses are necessary to evaluate the estimation method for the deformation modulus considering the local characteristics of rock masses.

• Journal of the Korea Institute of Building Construction
• /
• v.20 no.1
• /
• pp.43-51
• /
• 2020

The main purpose of protective facility for small military unit is to provide the protection of not all the weapons system but the near-miss bullet in Korean army. In particular about the small caliber bullets, especially KM80 in Korea, there were many studies that both of the experiential and structural design methods dose not reflect enough the military threat. For that reason, a new equation to calculate effective anti-piercing depths for RC slabs against small caliber bullets is proposed in earlier research with actual shooting test. But, the test only considers the strength of concrete without the thickness of concrete, types of aggregate, the angle of yaw of bullet, high-strength concrete, etc. Therefore, this study evaluated the ballistic resistance performance by thickness and proportion of magnetic aggregate of concrete. As a result, we identified two major statistical estimations that the error of piercing depth by the angle of yaw of bullet could be cancelled by barrage and the thickness and proportion of magnetic aggregate of concrete dose not effect on the protection ability of concrete structure.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.18 no.3
• /
• pp.227-243
• /
• 2005

This paper presents a hybrid control system combining lead rubber bearings and hydraulic actuators for seismic response control of a cable stayed bridge. Because multiple control devices are operating, a hybrid control system could improve the control performances. However, the overall system robustness may be impacted negatively by additional active control devices. Therefore, a secondary on-off type controller according to the responses of lead rubber bearings is combined with LQG algorithm to improve the controller robustness. Numerical simulation results show that control performances of the hybrid system controlled by an on off type LQG algorithm are improved compared to those of the passive and active control systems and are similar to those of performance oriented hybrid system controlled by a LQG algorithm with the similar peak and normed control forces. Furthermore, it is verified that the hybrid system with an on-off type LQG controller is more robust for stiffness matrix perturbation than conventional hybrid control of system, and there are no signs of instability in the overall system. The proposed control system also maintains the control performance under not only the design earthquakes but also the other earthquakes. Therefore, the hybrid control system using on-off type LQG algorithm could be proposed as an improved control strategy for seismically excited cable-stayed bridges containing many uncertainties.

• Aerospace Engineering and Technology
• /
• v.12 no.1
• /
• pp.40-45
• /
• 2013

Satellite's infrared detector shall be calibrated under thermal vacuum environment using a reference black body before a launch. The full aperture black body (FABB) as an infrared calibration reference shall be composed of vacuum compatible materials and temperature controlled from $-40^{\circ}C$ to $+40^{\circ}C$ with emissivity higher than 0.95. The temperature homogeneity over the central 80 % area of the FABB front surface shall be better than 2 K. The FABB designed by thermal and flow analysis was $1m{\times}1m{\times}8mm$ copper plate on which black painted aluminum honeycomb core was attached. Copper tubes were welded on the opposite side of the honeycomb core to allow temperature regulated gaseous nitrogen to flow through them. By the FABB validation test, the temperature homogeneity was observed around 1 K using 20 PT100 sensors and modified COTS infrared camera. The emissivity value was 0.975 at $40^{\circ}C$ under atmospheric pressure.

• Korea journal of population studies
• /
• v.28 no.2
• /
• pp.205-217
• /
• 2005

Purpose: To evaluate the factors affecting hospital utilization for respiratory diseases by ecological study design and GIS tool. To raise the social concern for respiratory disease by the result. Methods: Hospital admission data supported by national health insurance cooperation were transformed to spread sheet data format and combined with air monitoring dataset. Air pollution data were collected from the annual report of air monitoring published by Korea Ministry of Environment. Socioeconomic statistics including population density, age distribution, forest ratio etc.. were filed using Korea National Statistical Office database. Multiple linear regression analysis was performed to evaluate the factors affecting hospital utilization for respiratory diseases. Analytical unit was 52 cities. Results: The factors affecting hospital utilization for respiratory diseases were the proportion of population 60 years and over, seaside city, $O_3$ level, smoking rate. Conclusions: However, outdoor pollutants monitoring data and smoking rate have weakness in reflecting individual exposure. Further research is required to propose more illustrative means to evaluate causal relationship between air pollution and respiratory health effect factors.