• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1993년도 가을 학술발표회 논문집
• /
• pp.118-123
• /
• 1993

The purpose of this study is to put to practical use the economical high-strength lightweight concrete manufactured by domestic materials, through the analysis on the properties of lightweight concrete with the natural zeolite and mud stone abundant in domestic and compare them with those with silica fume. As a result, it was possible to gain proper workability in the lightweight concrete with admixtures through using the superplasticizer. the optimum replacement rate of zeolite and mud stone powder is respectively 5~10%, 10~15% on unit-cement amount. The strength development rate for plain concrete is 27%, 18% at optimum replacement rate.

• 한국주조공학회지
• /
• 제10권4호
• /
• pp.299-308
• /
• 1990

Ductile cast iron has a good ductility and ductility and toughness than those of gray cast iron, because the shape of graphite is spheroidal. It has been reported that the strengthening and toughening of the ductile cast iron was resulted from the good modification of various matrix structures obtained by the heat treatment or addition of alloying elements. This study aims to investigate the effect of various special heat treatment(Cyclic Heat Treatment, Intermediate Heat Treatment, Step Quenching), austempering and alloying element(Ni) on the strength and toughness of ductile cast iron. The results obtained from this study are summarized as follows. 1) With addition of Ni, the amount of pearlite or bainite were increased and the morphologies of pearlite or bainite became finer by special heat treatments. 2) As the Ni added and not added ductile cast iron were treated by austenitizing at $900^{\circ}C$ and $840^{\circ}C$, in the latter the austenite was mostly formed in the vicinity of eutectic cell boundary, but in the former on the whole matrix. 3) In cyclic heat treatment, the volume fraction of pearlite was increased and the shape of pearlite was fined with increase of the number of cycle. 4) The shape of pearlite was mostly bar type in the intermediate heat treatment, but spheroidal type in step quenching. 5) The mechanical properties of ductile cast iron containing 1.5%Ni austempered at $400^{\circ}C$ for 25min. after austenitizing at $900^{\circ}C$ for 15min. were a good value of hardness 105(HRB), impact energy 12.5(kg.m), tensile strength 112($kg/mm^2$) and elongation 6.8(%).

• PNF and Movement
• /
• 제12권4호
• /
• pp.233-241
• /
• 2014

Purpose: The purpose of this study is to investigate the effects of exercising on a stable and unstable surface for a period of six weeks on the arms of female university students in their twenties. Methods: The subjects consisted of 20 female university students. The experimental group consisted of ten individuals who exercised on an unstable surface, and the control group consisted of ten individuals who exercised on a stable surface. The exercise program was composed of aerobic exercises (i.e. Back and forth movements for clapping and raising cross with both arms) and muscle-strengthening exercises (i.e. Push-ups and raising arms). We measured the subjects before the experiment and after the exercise program using the following measurements tool: a ruler and T-scan plus. The same person measured changes in arm size with a ruler three times and calculated the average to minimize any errors in measurement. We controlled the subjects to measure the amount of arm muscle with a T-scan plus. Twelve hours before the measurements were taken subjects were not permitted to exercise, and four hours before the measurements were taken subjects were not permitted to eat anything. Results: The two groups had no significant difference, but each group felt the effect of the exercise program. Conclusion: There was no difference between the experimental group and the control group. However, it was determined that the exercise had a greater effect on an unstable surface than a stable surface.

• 한국기계가공학회지
• /
• 제16권6호
• /
• pp.69-74
• /
• 2017

In the current machining industry, machining precision is necessary and machining is being carried out. In this ultra-precision machining industry, the fixation of the workpiece is very important and the degree of machining depends on the degree of fixation of the workpiece. In ultra-precision machining, various methods, such as using a vise chuck or the like and using bolt nut coupling, are used for fixing a workpiece to an existing machine tool. In particular, when the precision gripping force of the jig is insufficient during machining of the ultra-precision mold parts, the machining material shakes due to the vibration or friction, and the machining precision is lowered. In the ultra-precision machining of power transmission parts, such as gears, the accuracy of the product is then determined. In addition, the amount of heat generated during machining has a significant effect on the machining accuracy. This is because the vibration value changes according to the grasp force of the jig that fixes the workpiece, and the change in the calorific value due to the change in the main shaft rotation speed of the ultra-precision machining. The increase in the spindle rotation speed during machining decreased the heat generation during machining, and the machining accuracy was also good, and it was confirmed that the machining heat changed according to the fixed state of the workpiece and the machining accuracy also changed. In this study, we try to optimize the driving part of the power vise by using structural analysis, rather than the power vise, using the basic mechanical-type power unit.

• Computers and Concrete
• /
• 제34권4호
• /
• pp.393-408
• /
• 2024

In recent decades the strengthening of reinforced concrete (RC) structural elements using Fiber-reinforced polymer (FRP) has received much attention. The behavior of RC elements can vary from axial compression to pure bending, depending on their loading. When the compressive behavior is dominant, the FRP jacket application is common, but when the flexural behavior is prevalent, the codes consider the FRP jacket ineffective. Codes suggest applying FRP bars or strips as Near-surface Mounted (NSM) or Externally Bonded (EB) in the tensile face to strengthen the beams under flexure. To strengthen the columns in tension-control mode, some researchers have suggested NSM FRP bars in both tension and compression faces alone or with the FRP jacket (hybrid). However, the number of tests that evaluate the pure bending of the strengthened columns as one of the pivotal points of the axial force-moment interaction curve is limited. In this paper, 11 RC elements strengthened using the NSM (in both tension and compression faces) or hybrid method were subjected to bending to assess the effect of the amount and material type of the FRP bar and jacket and the dimensions of the groove. The test results revealed that the NSM method increased the flexural capacity of the members between 10% to 50%. Furthermore, using the hybrid method increased the capacity between 51% to 91%. Finally, an analytical model was presented considering the effect of the NSM FRP bond in different circumstances, and its results were in good agreement with the experimental results.

• 한국문헌정보학회지
• /
• 제48권3호
• /
• pp.5-26
• /
• 2014

모든 나라에서 국가도서관을 위한 법정 납본은 자국에서 생산된 오프라인 및 온라인 출판물을 수집하는데 있어서 가장 중요한 장서개발 수단이다. 그러나 현재 국립중앙도서관은 취약한 납본시스템으로 인하여 국내에서 생산 제작된 모든 유용한 자료를 수집하는데 한계를 보이고 있다. 이에 본 연구에서는 법정 납본에 근거한 국립중앙도서관 장서개발의 현주소를 분석하고 연간 발행 제작되는 출판물의 총량을 추정한 다음에 이를 근거로 납본수집력 강화방안, 즉 가칭 '납본법' 제정을 비롯한 납본규정(지침, 기준)의 추가 개발과 보완, 도서관법상의 납본조항 및 내용 개정, 납본수집 대상자료의 합리적 유형화, 자료유형별 납본수집 범위의 최적화 전략을 제안하였다.

• 한국운동역학회지
• /
• 제17권3호
• /
• pp.147-154
• /
• 2007

This study's purpose is to investigate the effects on leg muscle activity caused by perturbation, using a trapdoor system during the support phase of gait for healthy adults (n = 6, height $177.5{\pm}5.5cm$, weight $81.0{\pm}9.5kg$, age $30.0{\pm}3.3yrs$). The trapdoor had the functional ability of causing inversion or eversion. The release time for the trapdoor was specified for two times, 0.3 and 0.5 seconds after heel contact. While altering these variables, EMG was recorded for the leg muscles (rectus femoris, biceps femoris, vastus lateralis, tibialis anterior, gastrocnemius, soleus). The following conclusions were derived. The steptime was longer for the 0.5s eversion than 0.3s inversion condition. So in order to regain stability after the perturbation the unsupporting leg reached forward rapidly. This quick reflex can be observed through the center of pressure (COP) and its rapid change in direction. The gastrocnemius was activated throughout the total experiment. There was a low amount of activity recorded in the rectus femoris, vastus lateralis and tibialis anterior except for the condition of inversion 0.3s. For most of the conditions, the highest average EMG peak values were recorded during the condition of inversion 0.3s. The iEMG patterns were similar for the conditions of inversion 0.3s and eversion 0.3s. To cope with the rapid change in these conditions, the biceps femoris was activated. During the experiment except for the condition of normal gait, the activity of the soleus and gastrocnemius was relatively high. Therefore, to prevent injury from perturbation of the lower leg strengthening of the soleus and gastrocnemius is required. Likewise to prevent injury to the thigh strengthening for the biceps femoris.

• 대한토목학회논문집
• /
• 제42권4호
• /
• pp.493-499
• /
• 2022

하수처리장의 방류수 수질기준이 강화되고 있으며, 이에 따라 하수처리장 시설도 고도화되고 있다. 또한 하수처리장의 방류수질은 높은 수준으로 유지되어야 하며, 이에 따라 효율적인 하수처리장 운영이 매우 중요한 이슈로 대두되고 있다. 본 연구에서는 하수처리장의 Blower Control Loigc 개발을 위해, 하수도 시설기준의 기본 송풍량 산정 방식을 기반으로 유입수질에 따른 필요 산소량 및 송풍량을 산정하였다. 본 연구를 통해 A 하수처리장의 실제 4월 수질 데이터를 적용하여 송풍량을 산정한 결과, 평균적으로 약 12 %의 송풍량이 절감이 될 수 있다는 것을 확인하였다. 본 연구에서 산정한 결과에 따라 Blower Control Logic을 개발하여 실제 하수처리장에 적용하게 된다면, 유입수질을 기반으로 송풍량 제어가 가능함에 따라 운전자의 경험에 의존하고 있는 기존의 하수처리 운영방식에서 벗어나 하수처리장 자율제어가 가능할 것으로 판단된다. 또한, 송풍량 및 전력비 절감이 이루어진 효율적인 하수처리장 운영을 기대 할 수 있으며, 이를 통해 불필요한 에너지 및 탄소 절감에 기여할 수 있을 것이라고 판단된다.

• 콘크리트학회논문집
• /
• 제14권6호
• /
• pp.922-933
• /
• 2002

교량바닥판의 손상이 구조물의 내구성, 안전성 및 기능에 영향을 미치기 때문에 손상된 바닥판의 성능향상을 위하여 섬유보강재를 사용한 구조물보강 사례가 증가하고 있다. 그러나 최근의 연구들이 구조물의 정적거동에 국한되어 있는 상이며, 피로거동에 대한 연구는 극히 제한적으로 수행되고 있다. 본 연구에서는 쉬트형 유리섬유보강재로 보강된 11개의 바닥판시험체에 대하여 정적 및 피로실험을 실시하여 구조거동을 실험적으로 검증하고자 하였다. 정적실험변수는 보강방향에 따른 보강량을 변수로 하였으며, 정적시험결과로부터 나타난 무보강시험체와 보강시험체의 최대하중에 기초하여 피로시험시의 응력수준을 선정하였다. 시험결과 보강된 바닥판의 경우 균열진전에 대한 저항성이 증진되는 것으로 나타났으며, 응력분배 효과 또한 뛰어난 것으로 나타났다. 이와 함께 피로시험결과 컴플라이언스 변화정도 역시 무보강바닥판에 비하여 효과적으로 감소하는 것으로 나타났다.

• 한국물환경학회지
• /
• 제36권6호
• /
• pp.500-507
• /
• 2020

This study examined the wastewater at a livestock farm, and found that the dairy wastewater from the milking parlor had a lower concentration than the piggery wastewater, and that it was produced at a rate under 1.3 ㎥/day in a single farmhouse. The amount of dairy wastewater was determined based on the performance of the milking machine, the maintenance method of the milking parlor, and the amount of milk production allocated for each farmhouse, not by the area. The results confirmed that both dairy wastewater treatment processes, specifically those using Hanged Bio-Compactor (HBC) and Sequencing Batch Reactor (SBR), can fully satisfy the water quality standards of discharge. The dairy wastewater has a lower amount and concentration than piggery wastewater, meaning it is less valuable as liquid fertilizer, but it can be easily degraded using the conventional activated sludge process in a public sewage treatment plant. Therefore, discharging the dairy wastewater after individual treatment was expected to be a more reasonable method than consigning it to the centralized wastewater treatment plant. The effluent after the SBR process showed a lower degree of color than the HBC effluent, which was attributed to biological adsorption. In the case of the milking parlor in the livestock farm, the concentrations of the effluents obtained after HBC and SBR treatments both satisfied water quality standards for the discharge of public livestock wastewater treatment plants at 99% confidence intervals, and the concentrations of total nitrogen and phosphorous in untreated wastewater were even lower than the water quality standards of discharge. Therefore, we need to discuss strengthening the water quality standards to reduce environmental pollution.