• 한국지하수토양환경학회지:지하수토양환경
• /
• 제7권2호
• /
• pp.45-52
• /
• 2002

문경지역 온천은 칼슘-중탄산 온천으로 원수의 온도는 약 $28.5^{\circ}C$이다 원수는 EC(1,857 $\mu\textrm{s}$/cm), $HCO_3$ (1,250 mg/l), $SO_4$(147.60 mg/l), Mg(43.05 mg/l) . 그리고 Ca(279.43 mg/l)로 상당히 높은 값을 나타낸다. 원수에는 소량의 침전물이 형성되지만 보일러로 가열할 경우 많은 양의 침전물이 형성된다. 원수에서 침전되는 광물은 대부분 방해석이지만 보일러실에는 아라고나이트와 방해석이 동시에 정출된다. 온천수 내의 화학종은 $CO_3$는 대부분 $HCO_3^{-}$ 이지만 상당 부분이 $H_2$$CO_3$로, $SO_4$는 $SO_4^{2-}$ , Mg는 $Mg^{2+}$ Ca는$ Ca^{2+}$ 로 존재한다. 전체적으로 볼 때 대부분의 성분에서 $CO_3$를 포함한 화학종이 존재하는 것을 볼 수 있다. 포화지수를 근거로 침전 가능한 광물은 다이아스포어, 보에마이트, 깁사이트, 아라고나이트, 방해석, 능철석 등이지만 X-선회절 분석결과 침전물은 아라고나이트, 방해석, 철수산화물로 구성되어 있다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 The 6th International Symposium of East Asian Resources Recycling Technology
• /
• pp.409-412
• /
• 2001

The high purity manganese oxides were made from the dust, generated in AOD process that produces a medium-low carbon ferromanganese and collected in the bag filter. Manganese oxide content in the dust was about 90%, and its phase was confirmed as Mn₃O₄. In the extraction of manganese, because of remaining amorphous MnO₂, the dust was reduced to MnO by roasting with charcoal. The pulp density of the reduced dust can control pH of the solution more than 4 and then Fe ion is precipitated to a ferric hydroxide. Because a ferric hydroxide co precipitates with Si ion etc, Fe, Si ion was removed f개m the solution. Heating made water to be volatized and nitrates was left in reactor Then nitrates were a liquid state and stirring was possible. Among the nitrates in reactor, only the manganese nitrate which have the lowest pyrolysis temperature pyrolyzed into β-MnO₂powder and NO₂(g) at the temperature less than 200℃. When the pyrolysis of manganese nitrate has been completed about 90%, injection of water stopped the pyrolysis. Nitrates of impurity dissolved and the spherical high purity β-MnO₂powders were obtained by filtering and washing. Mn₂O₃or Mn₃O₄ powder could be manufactured from β-MnO₂powder by controlling the heating temperature. Lastly, a manufactured manganese oxide particle has 99.97% purity.

• 한국분말재료학회지
• /
• 제24권4호
• /
• pp.292-297
• /
• 2017

A metallic oxide layer of a heat-resistant element contributes to the high-temperature oxidation resistance by delaying the oxidation and has a positive effect on the increase in electrical resistivity. In this study, green compacts of Fecralloy powder mixed with amorphous and crystalline silica are oxidized at $950^{\circ}C$ for up to 210 h in order to evaluate the effect of metal oxide on the oxidation and electrical resistivity. The weight change ratio increases as per a parabolic law, and the increase is larger than that observed for Fecralloy owing to the formation of Fe-Si, Fe-Cr composite oxide, and $Al_2O_3$ upon the addition of Si oxide. Si oxides promote the formation of $Al_2O_3$ and Cr oxide at the grain boundary, and obstruct neck formation and the growth of Fecralloy particles to ensure stable electrical resistivity.

• 공업화학
• /
• 제25권6호
• /
• pp.564-569
• /
• 2014

지르코니아 나노분말을 수열합성법으로 제조하였으며, 반응온도, 반응시간, 침전제의 종류 및 농도, 전구체의 종류를 실험 변수로 하였고, 각각의 제조된 분말을 X-선 회절(XRD)과 주사전자현미경(FE-SEM)을 통해 입자크기 및 결정상을 측정하였다. 침전제의 농도 증가에 따라 지르코니아 입자크기가 증가하였으며, 입자의 결정화도도 높아졌고, KOH 보다 NaOH 침전제를 사용하였을 경우, 입자 성장 속도가 증가하였다. 이는 입자의 크기 컨트롤에 있어 NaOH를 사용하는 경우보다 KOH를 사용하는 것이 더 효과적이었다. 4 h의 수열반응시간에서는 4 h의 수열반응시간에서는 비정질의 지르코니아 입자가 발견되었지만, 8 h 이상 합성 시, 단사정상의 지르코니아 입자가 생성됨을 확인하였고, 반응시간이 길어짐에 따라 지르코니아 입자의 폭이 소폭으로 줄어들고, 길이는 소폭 늘어남을 확인하였다. 동일한 합성 조건에서 전구체로서 zirconium (IV) acetate, zirconium nitrate, zirconium chloride 중에서 zirconium chloride를 사용하여 합성하였을 경우, 입자의 크기가 가장 작게 형성되었다.

• Macromolecular Research
• /
• 제12권1호
• /
• pp.1-10
• /
• 2004

The structural changes occurring in the isothermal crystallization processes of polyethylene (PE), poly-oxymethylene (POM), and vinylidene fluoridetrifluoroethylene (VDFTrFE) copolymer have been reviewed on the basis of our recent experimental data collected by the time-resolved measurements of synchrotron-sourced wide-angle (WAXS) and small-angle X-ray scatterings (SAXS) and infrared spectra. The temperature jump from the melt to a crystallization temperature could be measured at a cooling rate of 600-1,000 $^{\circ}C$/min, during which we collected the WAXS, SAXS, and infrared spectral data successfully at time intervals of ca. 10 sec. In the case of PE, the infrared spectral data clarified the generation of chain segments of partially disordered trans conformations immediately after the jump. These segments then became transformed into more-regular all-trans-zigzag forms, followed by the formation of an orthorhombic crystal lattice. At this stage, the generation of a stacked lamella structure having an 800-${\AA}$-long period was detected in the SAXS data. This structure was found to transfer successively to a more densely packed lamella structure having a 400-${\AA}$-long period as a result of the secondary crystallization of the amorphous region in-between the original lamellae. As for POM, the formation process of a stacked lamella structure was essentially the same as that mentioned above for PE, as evidenced from the analysis of SAXS and WAXS data. The observation of morphology-sensitive infrared bands revealed the evolution of fully extended helical chains after the generation of lamella having folded chain structures. We speculate that these extended chains exist as taut tie chains passing continuously through the neighboring lamellae. In the isothermal crystallization of VDFTrFE copolymer from the melt, a paraelectric high-temperature phase was detected at first and then it transferred into the ferroelectric low-temperature phase at a later stage. By analyzing the reflection profile of the WAXS data, the structural ordering in the high-temperature phase and the ferroelectric phase transition to the low-temperature phase of the multi-domain structure were traced successfully.

• 한국진공학회지
• /
• 제17권6호
• /
• pp.576-581
• /
• 2008

각종 전자 방출원 및 디스플레이 응용분야에서 우수한 가능성을 보이고 있는 이중벽 탄소나노튜브를 Tetra Hydro Furan(THF) 열분해 방법으로 대량합성 하였다. 본 연구에서는 Fe-Mo 금속이 MgO 담지체에 담지된 촉매에 THF 를 공급하여 이중벽 탄소나노튜브를 합성하였다. 이 합성된 이중벽 탄소나노튜브는 비정질 탄소파티클이 없는 고순도로 합성되었으며, 탄소나노튜브 다발의 직경은 12 - 20 nm 로 균일하게 분포하였고, 성장 길이는 수십 마이크로미터 였다. TEM 분석 결과 이중벽 탄소나노튜브 5 - 10 가닥이 뭉쳐있는 다발 형태로 존재하였고, 합성된 이중벽 탄소나노튜브의 Raman spectrum 분석 결과 내부 직경이 0.9 - 1.5 nm, 외부 직경이 1.6 - 2.2 nm 의 직경 분포를 갖는 이중벽 구조의 탄소나노튜브가 합성되었음을 확인 할 수 있었다. 본 연구에서 사용된 THF 가 이중벽 탄소나노튜브를 합성하는데 적합한 탄소공급원임을 제시한다.

• 한국토양비료학회지
• /
• 제48권5호
• /
• pp.391-396
• /
• 2015

Arsenic (As) contamination of agricultural soils resulting from mining activity has caused major concern due to the potential health risk. Therefore the current study was carried out to investigate the relationship between fractionation of As in soil and rice uptake and to provide a basic information for adequate management of As contaminated agricultural soil. Twenty agricultural soils and rice affected by the abandoned mining sites were collected. Soil chemical properties and As concentrations (total and sequential extracted) in soils were determined and As concentrations in polished rice were analyzed. The average concentration of As in non-specifically adsorbed (F1), specifically adsorbed (F2), amorphous hydrous oxides of Fe and Al (F3), crystalline hydrous oxides of Fe and Al (F4) and residual phase (F5) were 0.08, 1.38, 10.34, 3.26 and $10.98mgkg^{-1}$, respectively. Both soil pH and available phosphorus were positively correlated with the concentrations of As in F1 and F2. These results indicate that increasing the soil pH and available phosphorus can significantly increase the easily mobile fractions of As (F1 and F2). The average concentration of As in polished rice was $0.09mgkg^{-1}$. The concentrations of As in F1 and F2 showed a positive correlation with the concentrations of As in polished rice. Therefore soil pH and available phosphorus affect the distribution of As fractionation in soils and thus affect As bioavailability.

• 한국토양비료학회지
• /
• 제43권6호
• /
• pp.917-922
• /
• 2010

To assess the bioavailability of As in soils and to provide a basic information for adequate management of As contaminated fields, paddy soils and rice grains near 5 closed mines were collected and analyzed for As using sequential extraction procedure. The As contents extracted with 1M HCl against total As content in soils were ranged from 5.4 to 41.9% ($r=0.90^{**}$). However, these two contents of As in soils were not positively correlated with As concentration in rice grains. Major As fractionation of paddy soils was residual form ranging 38.1 to 84.1% except NS mine. Also, specially adsorbed fraction and fraction associated with amorphous Fe and Al oxyhydroxides, which are partially bioavailable As fractionation to the rice plant, were positively correlated with As in rice grains while fraction associated with crystalline Fe and Al oxyhydroxides and residual form were not correlated.

• 대한토목학회논문집
• /
• 제29권1B호
• /
• pp.91-96
• /
• 2009

LDH(Layered double hydroxide) 물질을 제조하고 이를 이용하여 비소를 흡착시키는 실험을 수행하였다. TEM을 이용하여 제조한 LDH 물질의 형상을 살펴본 결과 열처리를 거친 시료는 나노크기의 결정화된 구조를 가지고 있고 열처리를 거치지 않은 시료는 아직 결정화가 완전히 이루어지지 않았으며 크기도 마이크로 범위에서 나타났다. X선 회절분석 결과를 보면 이 같은 결과가 뚜렷이 나타났으며, 열처리를 거친 경우는 뚜렷한 결정화를 보이고 있었다. $N_2$ 흡착 및 탈착 결과를 통해 LDH가 mesoporous한 공극 형태를 가지고 있다는 것을 알 수 있었다. 비표면적은 열처리를 거친 시료가 열처리를 거치지 않은 시료보다 2배 이상 크게 나타났다. 흡착 등온 실험 결과에서도 두 시료는 비슷한 흡착량을 보이며 기존 철산화 물에 못지않은 흡착능을 나타내고 있다. 금번에 합성한 Mg Fe-LDH 물질을 이용하여 토양 및 지하수의 비소 제거 공정에 적용할 수 있음을 확인하였다.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2009년도 추계학술발표대회
• /
• pp.34.2-34.2
• /
• 2009

The ceramic coatings on metallic materials have attracted by many researchers due to the chemical inertness of ceramic materials. In such aspect, SiOC is a promising material tobe used as protective coating layer on metallic materials due to its outstanding thermal stability and chemical inertness. In this research, SiOC coating was carried out onto SuS-316 substrate using Cl free preceramic polymers such aspolyphenylcarbosilane. 20% of polymethylphenylsilane in cyclohexane solution was coated onto metal surface by dip coating method. Thermal oxidation was carried out at $200^{\circ}C$ for crosslink of the preceramic polymer and the sample was pyrolysized at $800^{\circ}C$ under argon to convert the preceramic polymer to amorphous SiOCx state. The microstructure of the SiOCx film after pyrolysis was investigated using FE-SEM. Corrosion resistance of SiOC coated SuS-316 substrate has been investigated using 5% HCl solution at 25, 40, 60 and $80^{\circ}C$ for 7days. The data revealed that the corrosion resistance increased with SiOC coating on SuS-316 substrate.