• 한국재료학회지
• /
• 제15권12호
• /
• pp.802-808
• /
• 2005

The hydrogen sorption speeds of $Zr_{57}V_{36}Fe_7$ amorphous alloy and its crystallized alloys were evaluated at room temperature $Zr_{57}V_{36}Fe_7$ amorphous alloy was prepared by ball milling. The amorphous alloy was crystallized through two stages. Initially, $\alpha-Zr$ solid solution was appeared from the amorphous phase. Two cubic Laves compounds were precipitated afterwards from the remained amorphous and from excessively saturated solid solution at higher temperature. The hydrogen sorption speed of the partially crystallized alloy was higher than that of amorphous. The enhanced sorption speed of partially crystallized alloy was explained in terms of surface oxygen stability which has been known to retard the activation of amorphous alloys. The retardation could be reduce by crystallization process resulting in the observed increase in sorption property.

• 한국전기전자재료학회논문지
• /
• 제32권4호
• /
• pp.341-348
• /
• 2019

This paper reports the microstructure and electrochemical properties of Si-Al-Fe ternary amorphous alloys prepared by rapid solidification as an anode for lithium secondary batteries. The microstructure was analyzed using XRD and HR-TEM with EDS mapping. In accordance with DSC analysis, annealing was performed to crystallize the active nano-Si in the amorphous alloy. Thus, nano-Si forms (~80 nm) embedded in the matrix alloy, such as $Fe_2Al_3Si_3$, $FeSi_2$, and $Fe_{0.42}Si_{2.67}$, were successfully synthesized. The electrode based on the Si-Al-Fe ternary alloy delivered an initial discharge capacity of approximately $700mAh^{g-1}$, and exhibited a high Coulombic efficiency of 99.0~99.6% from the $2^{nd}$ to $70^{th}$ cycles.

• 한국재료학회지
• /
• 제8권11호
• /
• pp.1026-1030
• /
• 1998

Fe기 비정질합금에서 과냉각액체영역의 유무에 따른 열적 안정성을 비교평가하기 위하여 결정화온도 이하에서 유리천이가 나타나지 않는 $Fe_{80}P_6C_{12}B_{12}$합금과 52K의 과냉각 액체영역을 갖는 $Fe_{73}P_{11}C_6B_4AI_4Ge_2$ glassy 합금을 열분석하였다. 등온결정화에 의한 열분석의 결과 JMA plot의 n값은 $Fe_{80}P_6C_{12}B_{12}$합금이 1.8-2.2이고 과냉각 액체영역을 갖는 $Fe_{73}P_{11}C_6B_4AI_4Ge_2$ 합금이 2.5-4.0으로서 후자의 경우가 열적으로 안정하였다. 결정화의 양상은 $Fe_{80}P_6C_{12}B_{12}$ 합금의 경우 핵생성속도가 일정할 때 확산율속에 의해 결정입자가 성장하는 반면 $Fe_{73}P_{11}C_6B_4AI_4Ge_2$ glassy합금의 경우 핵생성속도가 일정할 때 계면입자가 성장한다. $Fe_{73}P_{11}C_6B_4AI_4Ge_2$ 합금 및 $Fe_{80}P_6C_{12}B_{12}$ 합금의 결정화에 필요한 활성화에너지, 핵생성 및 성장에 필요한 활성화에너지는 각각 371, 353kJ/mol, 그리고 324, 301KJ/mol 및 301, 273KJ/mol로서 과냉각 액체영역을 갖는 합금이 열적으로 안정하다고 판단된다.

• 한국자기학회지
• /
• 제16권3호
• /
• pp.186-191
• /
• 2006

자기터널접합 기반의 MRAM(magnetic random access memory)은 자기저항효과를 응용하는 메모리소자로서 비휘발성과 고속 정보처리가 가능할 뿐만 아니라 고집적화 할 수 있는 차세대 통합형 비휘발성 메모리이다. 그러나 기존의 메모리 소자들에 비해 스위칭 산포가 크고, 기록마진(writing margin)이 확보되지 않아 아직까지는 고집적화가 어려운 실정이다. 최근 포화자화가 낮은 NiFeSiB 및 CoFeSiB과 같은 비정질 강자성체를 자기터널접합의 자유층 재료로 사용하여 스위칭 자기장의 거대화를 크게 감소시켜 MRAM의 기록마진을 높이는 연구결과에 관해 정리하여 보았다. 그리고 이러한 물질을 이용하여 자기터널접합의 재생마진(reading margin)과 관련된 터널자기저항비의 인가전압의존성을 저감시킬 수 있었다. 본고에서는 나노자기소자 기술의 중요한 분야인 MRAM의 기술발전 방향과 연구사례를 소개하고자 한다.

• 한국분말재료학회지
• /
• 제15권4호
• /
• pp.285-291
• /
• 2008

Fe based ($Fe_{68.2}C_{5.9}Si_{3.5}B_{6.7}P_{9.6}Cr_{2.1}Mo_{2.0}Al_{2.0}$) amorphous powder were produced by a gas atomization process, and then ductile Cu powder fabricated by the electric explosion of wire(EEW) were mixed in the liquid (methanol) consecutively. The Fe-based amorphous - nanometallic Cu composite powders were compacted by a spark plasma sintering (SPS) processes. The nano-sized Cu powders of ${\sim}\;nm$200 produced by EEW in the methanol were mixed and well coated with the atomized Fe amorphous powders through the simple drying process on the hot plate. The relative density of the compacts obtained by the SPS showed over 98% and its hardness was also found to reach over 1100 Hv.

• Journal of Magnetics
• /
• 제18권4호
• /
• pp.395-399
• /
• 2013

The metallic glass ribbons of $[(Fe_xCo_{1-x})_{0.75}B_{0.2}Si_{0.05}]_{96}Mo_4$ (x = 0, 0.3, 0.6, 0.9 at.%) and $[(Fe_xCo_{1-x})_{0.75}B_{0.2}Si_{0.05}]_{96}Nb_4$ (x = 0, 0.3, 0.6, 0.9 at.%) were obtained by melt spinning with 25-30 ${\mu}m$ thickness. The thermal stability, mechanical properties and magnetic properties of Fe-Co-B-Si based systems were investigated. The values of thermal stability were measured using differential scanning calorimetry (DSC), including glass transition temperature ($T_g$), crystallization temperature ($T_x$) and supercooled liquid region (${\Delta}T_x=T_x-T_g$). These amorphous ribbons were identified as fully amorphous, using X-ray diffraction (XRD). The mechanical properties of Febased samples were measured by nano-indentation. Magnetic properties of the amorphous ribbons were measured by a vibrating sample magnetometer (VSM). The amorphous ribbons of $[(Fe_xCo_{1-x})_{0.75}B_{0.2}Si_{0.05}]_{96}Mo_4$ (x = 0, 0.3, 0.6, 0.9 at.%) and $[(Fe_xCo_{1-x})_{0.75}B_{0.2}Si_{0.05}]_{96}Nb_4$ (x = 0, 0.3, 0.6, 0.9 at.%) exhibited soft magnetic properties with low coercive force ($H_c$) and high saturation magnetization (Ms).

• 한국자기학회지
• /
• 제5권1호
• /
• pp.8-14
• /
• 1995

$Fe_{87}Zr_{7}B_{6}$(at.%)조성의 합금에 Fe에 대해 비고용원소인 Ag를 B와 1.0at.% 치환한 $Fe_{87}Zr_{7}B_{5}Ag_{1}$(at.%) 조성의 비정질리본을 액체급냉법으로 제조하여, 연자 기특성을 조사하였다. 급냉응고된 비정질리본의 연자기특성을 향상시키기 위하여 $300~600^{\circ}C$에서 $50^{\circ}C$ 간격으로 열처리한 후, 비정질리본의 연자기특성 및 미세조직의 변화를 조사하였다. 열처리방 법은 진공분위기에서 무자장중 열처리하여 상온까지 노냉했다. $Fe_{87}Zr_{7}B_{5}Ag_{1}$ 비 정질리본을 $400^{\circ}C$에서 1시간 등온열처리하였 때, 보자력$(H_{c})$ 15 mOe, 초투자율$(\mu_{i})$ 288,000(1kHz, 2mOe) 그리고 철손$(W_{c})$ 50 W/kg(100kHz, 1,000G)이라는 Co계 비정질합금에 필적할 수 있는 대단히 우수한 연자성재료가 개발되었다. 이와 같은 우수한 연자기특성은 Fe 와 비고용원소인 Ag 를 소량 첨가함에 따라 열처리에 의해 2~3 nm 크기의 미세한 Fe-rich cluster 형성에 따른 전기저항의 증가, 자왜의 감소 그리고 자구(domain) 크기의 감소에 기인한다고 생각된다.

• 대한전기학회논문지
• /
• 제43권3호
• /
• pp.432-436
• /
• 1994

The aging characteristics of amorphous FeS178TBS113TSiS19T wound cores have been investigated as a function of aging temperature and time. The core losses(1.2T/60Hz) of amorphous wound cores dipped in transformer oil decrease in comparision with initial stage of aging test due to insulation of ribbon stacks by oil penetration. It is estimated that it takes 30 years or more for 10% increase in core losses (1.2T/60Hz) of amorphous wound cores aged at normal transformer running temperature(100$^{\circ}C$). So we condlude that the amorphous core is satisfactorily applicable to transformer.

• 동력기계공학회지
• /
• 제9권4호
• /
• pp.90-95
• /
• 2005

The wire-arc process is a low-cost thermal spray method simply utilizes electrical energy to melt the feedstock wire. It is more userful for field applications, especially to coat large surface area. In this paper, a special Fe-based alloy coatings by using the wire-arc process were developed. Nanoscale composite coatings were achieved either during spraying or through a post heat treatment. As-sprayed Fe-based alloy coatings had been an amorphous matrix structure, after heating to $700^{\circ}C$ for 10 minutes a solid state transformation occurred in the some fraction of amorphous matrix which resulted in the formation of nanostructured recrystallized phase. Scanning electron microscopy (SEM) and field emotional scanning electron microscope(FE-SEM) were applied to analyze the microstructure of the coatings. Additionally hardness and bend resistance of the Fe-based alloy coatings were examined, and these results were compared with those of partially stabilized zirconia(PSZ) coatings by using the plasma spray process.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part2
• /
• pp.786-787
• /
• 2006

The magnetic inductance of nanocrystalline $Fe_{73}Si_{16}B_7Nb_3Cu_1$ and an amorphous FeSiB powder sheet has been investigated to identify RFID performance. The powder was mixed with binder and solvent and tape-casted to form films. Results show annealing significantly influenced on the inductance of the material. The surface oxidation of the particles was the main reason for the reduced inductance. The maximum inductance of $Fe_{73}Si_{16}B_7Nb_3Cu_1$ alloy was about $88{\mu}H$ at 17.4 MHz, about 65% greater compared to the FeSiB alloy. The higher inductance in the nanocrystalline alloy indicates it may be used as a potential replacement of current RFID materials.