• Environmental Engineering Research
• /
• 제17권2호
• /
• pp.111-116
• /
• 2012

This study investigates the complete removal of nitrate and the recovery of valuable ammonium salt by the combination of nanoscale zero-valent iron (NZVI) and a membrane contactor system. The NZVI used for the experiments was prepared by chemical reduction without a stabilizing agent. The main end-product of nitrate reduction by NZVI was ammonia, and the solution pH was stably maintained around 10.5. Effective removal of ammonia was possible with the polytetrafluoroethylene membrane contactor system in all tested conditions. Among the various operation parameters including influent pH, concentration, temperature, and contact time, contact time and solution pH showed significant effects on the ammonia removal mechanism. Also, the osmotic distillation phenomena that deteriorate the mass transfer efficiency could be minimized by pre-heating the influent wastewater. The ammonia removal rate could be maximized by optimizing operation conditions and changing the membrane configuration. The combination of NZVI and the membrane contactor system could be a solution for nitrate removal and the recovery of valuable products.

• 한국응용과학기술학회지
• /
• 제21권4호
• /
• pp.335-344
• /
• 2004

In this work, the properties as polishing wax for automobile of O/W type microemulsion containing wax, liquid paraffine and quaternaryammonium salt was investigated. The microemulsions were prepared at $96{\sim}97^{\circ}C$ by the phase inversion method, and polyoxyethylene(20) sorbitan monooleate (POE(20)SMO) and distearyl dimethyl ammonium chloride(D.D.A.C) as the emulsifiers were used. The mean particle size of the rnicroemulsions was about 7${\pm}$0.5nm and as the properties of polishing wax, gloss increased degree, water resistant gloss degree, initial and final contact angle after water resistance were tested. The result was that the value of water resistantance and contact angle were decreased with increasing amount of POE(20)SMO and D.D.A.C., while the gloss degree values did not affected. And the rnicroemulsion blended with mono ethylene glycol(MEG) of 5${\sim}$15wt% showed smaller particle size and more stable particle size distribution than without MEG. Finally, this microemulsion showed more excellent values of gloss degree, the water resistant gloss degree and contact angle, than two kinds of commercial polishing wax for automobile.

• Korean Chemical Engineering Research
• /
• 제43권3호
• /
• pp.380-386
• /
• 2005

유기 붕산계 화합물과 4차 암모늄염의 혼합물을 추출제로 사용하여 에멀젼형 액막법에 의한 과당과 포도당의 분리가 회분식 반응기에서 이루어졌다. 당 분리를 위해 적합한 추출제와 최적의 실험조건을 찾기 위하여 각 당에 대하여 독립적으로 추출 실험이 수행되었다. 원료상의 당 농도, 붕산계 화합물 종류와 w/o 비와 같은 여러 변수들이 과당과 포도당 분리에 미치는 영향이 조사되었으며, 이때 원료상과 회수상에서의 최종 당 농도가 분석되었다. 원료상에서의 과당/포도당 추출률 비는 매우 높았지만, 회수상에서의 당 농도는 높지 않았다. 상업적인 당 분리를 위한 에멀젼형 액막 시스템 개발을 위해 보다 회수상으로 과당의 역추출을 강하게 추진할 수 있는 염을 찾는 것이 요구되었다.

• 분석과학
• /
• 제16권3호
• /
• pp.198-205
• /
• 2003

쿠페론은 nitrosophenylhydroxylamine의 ammonium salt로서 흡착촉매 벗김법 (AdCtSV)에서 리간드의 역할을 하고 동시에 촉매 역할을 한다고 알려져 있다. 순환 전압전류법을 이용하여, 1 mM 인산염 완충용액에서 오스뮴-쿠페론 착물의 전기화학적 행동을 살펴보았다. 오스뮴 정량의 최적 조건은 1 mM 인산염 완충용액 (pH 6.0), 0.1 mM 쿠페론의 용액에서 주사속도는 100 mV/s 이었다. 이 조건에서 농도 변화에 따른 선형 주사 전압곡선의 환원 봉우리 전류변화를 이용하여 얻은 오스뮴의 검출 한계 ($3{\sigma}$)는 $1.0{\times}10^{-7}M$이다.

• Archives of Pharmacal Research
• /
• 제12권1호
• /
• pp.17-21
• /
• 1989

We have reported earlier on the reactivity of 7-dithiocarboxy-3-phenyl-5,6-dihydro imidazo[2,1-b]thiazolium-betaine with several para-substituted phenacyl bromides. In this work reactions of 7-dithiocarboxy-3-phenyl(or methyl)-5,6-dihydro imidazo[2,1-b]thiazolium-betaine with a series of aliphatic alkylating agents of ${\alpha}$ -halo ketone,${\gamma}$-halo koto ester and ${\alpha}$ -halo ester were examined for the similar purpose. In case of ${\alpha}$-halo ketone or ${\gamma}$-halo koto ester such as ${\alpha}$ -chloro acetone or ethyl 4-chloro acetoacetate new biheterocyclic compound was obtained via ring transformation reaction. However, reaction of the betaine with methyl(or ethyl) bromoacetate used as a ${\alpha}$-halo ester, gave, in-stead, S-alkylated quarternary ammonium salt.

• 약학회지
• /
• 제20권3호
• /
• pp.156-161
• /
• 1976

The salting in and salting out of Octoxynol, N.F., a nonionic polyoxyethylated surfactant by n-alkylamine hydrochlorides ws investigated by measuring their effect on the cloud point of the surfactant at various salt concentrations. The carbon number of the alkyl chain was varied from zero to twelve. Ammonium chloride, methylamine hydrochloride and ethylamine hydrochloride tended to salt out the surfactant, lowering its cloud point in proportion to the salt concentration. n-Ankylamine and n-butylamine hydrochlorides showed salting-out effect at low concentrations of the electrolyte, while their effects were leveled off and showed rather salting-in trend at higher concentrations of the electrolyte. These salting-in effect was ascribed to the formation of a hydrotropy of the n-alky lammonium cations with the surfactant. The higher homolog compounds of n-alkylamine hydrochlorides showed extraordinarily high salting-in effect at very low oncentrations of the electrolyte. These large salting-in effects were more drastic as the chain length was getting longer. These large increases of the cloud point of the surfactant were attributed to the formation of mixed micelles of n-alkylammonium cations with the polyoxyethylated surfactant.

• 한국대기환경학회지
• /
• 제19권5호
• /
• pp.503-513
• /
• 2003

A single particle analytical technique, called low-Z electron probe X-ray microanalysis (low-Z EPMA) was applied to characterize atmospheric particles collected in Busan, Korea, over a daytime period in Dec. 2001. The ability to quantitatively analyze the low-Z elements, such as C, N, and 0, in microscopic volume enables the low-Z EPMA to specify the chemical composition of individual atmospheric particle. Various types of atmospheric particles such as organics, carbon-rich, aluminosilicates, silicon oxide, calcium carbonate, iron oxide, sodium chloride, sodium nitrate, ammonium sulfate, and titanium oxide were identified. In the sample collected in Busan, sodium nitrate particles produced as a result of the reaction between sea salt and nitrogen oxides in the atmosphere were most abundantly encountered both in the coarse and fine fractions. On the contrary, original sea salt particles were rarely observed. The fact that most of the carbonaceous particles were distributed in the fine fraction implies that their origin is anthropogenic.

• Journal of Welding and Joining
• /
• 제14권2호
• /
• pp.65-70
• /
• 1996

Detonation velocity of domestic expolsives was measured using the Dautriche method. The variables employed in this study were the thickness of explosive and the amount of salt added in the ammonium nitrate(AN) explosive. As the results of this study, it was shown that the detonation velocity increases with an increase of explosive thickness but decreases with an increase of salt content. It was further demonstrated that the detonation velocity decreases rather rapidly when the salt content increases over 20 percent. In addition, the accuracy of Dautriche method was evaluated as a preliminary study and its result showed that this method is quite reliable with an experimental error of less than 10 pct.

• 한국세라믹학회지
• /
• 제25권1호
• /
• pp.66-72
• /
• 1988

The effect of salts on the formation of ${\alpha}$-hemihydrated gypsum at boiling temperature under atmospheric pressure was studied by the solubility measurement method, and the formation of ${\alpha}$-hemihydrated gypsum from by-product gypsum of phosphoric acid process in the salts solution were investigated. The order of catalytic effect of salt on the formation of ${\alpha}$-hemihydrated gypsum are as follows: NH4Cl>NaCl>NaNO3. In the salts solution of sodium nitrate, sodium chloride, and ammonium chloride, prismatic ${\alpha}$-hemihydrated gypsum was obtained and the crystal form was converted to needle form in complex solution with sulfuric acid. The P2O5 content in gypsum was largely decreased in this atmosphoric solution process.

• Membrane and Water Treatment
• /
• 제8권5호
• /
• pp.411-421
• /
• 2017

Forward osmosis (FO) is an emerging technology which can possibly make the desalination process more cost and energy efficient. One of the major factors impeding its growth is the lack of an appropriate draw solute. The present study deals with the identification of potential draw solutes, and rank them. The comparison was carried out among ten draw solutes on the basis of four main parameters namely; water flux, reverse salt diffusion, flux recovery and cost. Each draw solute was given three 24 hour runs; corresponding to three different concentrations; and their flux and reverse salt diffusion values were calculated. A fresh membrane was used every time except for the fourth time which was the flux recovery experiment conducted for the lowest concentration and the change of flux and reverse salt diffusion values from the initial run was noted. The organic solutes inspected were urea and tartaric acid which showed appreciable values in other parameters viz. reverse salt diffusion, flux recovery and cost although they generated a lower flux. They ranked 5th and 8th respectively. All the experimented draw solutes were ranked based on their values corresponding to each of the four main parameters chosen for comparison and Ammonium sulfate was found to be the best draw solute.