• Economic and Environmental Geology
• /
• v.38 no.6 s.175
• /
• pp.657-662
• /
• 2005

Extractions fro fertilizer and soil samples were performed to yield the operationally defined fractions 'soluble' chromate (extractable with $NH_4NO_3$), 'exchangeable' chromate (extractable with phosphate buffer pH 7.2), and these results were compared with the data obtained by extractions with ammonium sulfate, borate buffer pH 7.2, saturated borax pH 9.6, and polyphosphate (Graham's salt). In order to maintain the pH of extractant solution about constant, the concentration of extractant buffer had to be raised to at least 0.5 M. The results strongly depended on the kind of extractant, and the solid: liquid ratio. For most of the samples investigated, the extraction efficiency increased in the order borate-sulfate-nitrate-phosphate. Whereas the recovery of $K_2CrO_4\;and\;CaCrO_4$ added to the samples of basic slags prior to the extraction was about complete, the recovery of added $PbCrO_4$ was highly variable. In soil extracts, the color reaction was interfered from co-extracted humics, which react with the chromate in weak acid solution during the time period necessary for color reaction (1 hour). However, this problem can be overcome by standard addition and subtraction of the color of the extractant solution. In soil extract of about pH < 7, organic material reduced chromate during the extraction period also, and standard addition of soluble chromate is recommended to prove recovery and the stability of chromate in the samples. In admixtures of soils and basic slags, results for hexavalent chromium were lower than from the mere basic slags. This effect was more pronounced in phosphate than in nitrate extracts. As a proficiency test, samples low in organic carbon from contaminated sites in Hungary were tested. The results from $NH_4NO_3$ extracts satisfactorily matched the results of the Hungarian labs obtained from $CalCl_2$ extractants.

• Journal of the Korean Ceramic Society
• /
• v.41 no.9
• /
• pp.670-676
• /
• 2004

The synthesis of highly concentrated silver nano sol assisted by polymeric dispersant (polyelectrolytes) for inkjet method was studied. The silver nano sol was prepared with AgNO$_3$, polyelectrolytes (HS5468cf ; polyacrylic ammonium salt), and reducing agent. The polyelectrolytes play an important role in formation of complex composed of Ag$\^$+/ion and carboxyl group (COO$\^$-/), result in preparation of highly dispersed silver nano particles. The optimization of added amount of polyelectrolytes, and concentration of silver nano sol was studied. The silver nanoparticles were evaluated by XRD, particle size/zeta potential analyzer and FE-TEM. The silver nanoparticles with the range of 10 nm in diameter were produced. The concentration of batch-synthesized silver nano sol was possible up to 40 wt%.

• Applied Chemistry for Engineering
• /
• v.17 no.4
• /
• pp.397-402
• /
• 2006

We have investigated the effect of each ingredient in the light diffusing film (LDF) which was used as backlight unit (BLU) of TFT-LCD TV on physical, electrical, thermal and optical properties of LDF. In anti-blocking layer, the excellent anti-blocking ability was obtained when 0.5~1.5 wt% of acrylic bead was added, and good decay-time and water-stability were shown when 0.8 wt% of tertiary ammonium salt was added. Optimal results for adhesion strength, curing rates and flexibility on the surface of PET film have been obtained in the light diffusing layer by using acrylic polyol as a binder resin, and by addition of 30~35 wt% non-yellowing type HDI crosslinker. In addition, the highest normal luminance value was obtained by addition of 250 wt% poly-dispersive polystyrene ($20{\mu}m$ PS) and polymethylmethacrylate ($20{\mu}m$ PMMA) beads into the binder resin (100 wt%). The higher normal luminance could be got for PMMA beads than PS beads because of the transmittance difference.

• The Korean Journal of Food And Nutrition
• /
• v.9 no.4
• /
• pp.404-408
• /
• 1996

One of the major objectives of the food industry is the enrichment of the functional properties and nutritional value of soybean protein. To attain this goal, an expression system of cDNA encoding native and protein-engineered soybean proteins in a microorganism must be developed and the function then ability of self-assembly and the functionalities of the expressed proteins should be evaluated before the modified genes are transfered to soybean plants. The pro-$\beta$-conglycinin synthesized in E. coli BL21(DE3) comprised approximately 20% of the total bacterial proteins and the expressed protein are formed soluble and trimer such as native protein in E. coli cells. The highly expressed protein was purified to homogeneity by salt precipitation with 20~40$ Ammonium sulfate ion-exchange chromatography with Q-Sepharose and hydrophobic column chromatography with Butyltoyopearl. Therefore, we concluded that the high-level expression system of $\beta$-conglycinin cDNA was established and a relatively simple and rapid method for purifying pro-$\beta$-conglicinin was also developed.

• Asian Journal of Turfgrass Science
• /
• v.5 no.1
• /
• pp.47-53
• /
• 1991

A laboratory experiment was conducted in order to learn the effect of a number of organic matters on the ammonification and nitrification of urea, and the reaction of soil, applied to a loamy upland soil poor in orgnic matter(<1.5%, without plants 1.The ammonification of urea was most pronounced in one week period immediatly after fertilizer and water treated, after which a rapid decrease of it was followed showing no accumulation at the end of 3rd week. Owing to the accumlation of ammonium, pHs of treated soils were read 7.0 to 7.3 from 6.8~6.9. 2.Nitrification was also progressed rapidly in the first one week period so that the accumulation of NO$_3$-N surpassed that of ammonia during this period. After the 1st week the accumulation of N0$_3$-N was continuously increased showing the maximum at the end of 4 weeks following a sharp decrease at the end of 5th weeks. The accumulation of NO$_3$-N dropped soil pH from 6.8-7.0 to 6. 0-6.2,but the decrease of NO-N at the end of 5th weeks brought up soil pH to 6.4-6.6. again. 3.Amino acid fermentation byproduct rich in salt, paticularly chloride, slowed down the ammonification and nitrification of urea. 4.The application of organic matter diminished the acidifying effect of chemical fertilizers. The diminishing effect of soluble humic acid and amion acid fermentation byproduct showed greater than that of solid organic matter in this experiment, which might be own to the application of a rather small amount of water soluble organic matters. Rice straw powder among solid organic matters appeared to be the least in the diminishing effect above. It may be reasoned that these soluble organic matters decomposes rapidly so as to affect Soil pH, but solid organic matters, particularly the rice straw powder, form acidic humus.

• Elastomers and Composites
• /
• v.35 no.4
• /
• pp.288-295
• /
• 2000

It has been tried to decrease the crosslink density of vulcanized EPDM (ethylone-propylene-diene terpolymer) rubber through a chemical devulcanization treatment. Phase transfer catalyst, alkali metal (i.e., sodium), and triphenylphosphine have been used as a chemical agent ul the devulcanization treatment. Also it has been estimated the effect of the devulcanization treatment in the case of utilization of 2-butanol as a devulcanization reaction solvent. In the devulcanization treatment using quaternary ammonium salt as a phase transfer catalyst. the devulcanization effect has been studied with the variation of catalyst molecular weight and the choice of bromide or chloride cation. In the devulcanization treatment using sodium, it has been estimated the devulcanization treatment effect depending upon the variation of reaction variables such as amount of sodium used, reaction temperature, pressure of hydrogen gas, which is used as a reaction environment. The $M_c$ value (number average molecular weight between two crosslink points) has been experimentally estimated by the equilibrium swelling method and it is quantitatively related to the crosslink density. The estimation of devulcanization effect for vulcanized EPDM rubber has been carried out by the comparison of the $M_c$ values between the untreated and the treated specimens.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2011.10a
• /
• pp.14-14
• /
• 2011

Polyamines (putrescine, spermidine and spermine) play pivotal roles in plant defense to different abiotic and biotic stresses. In order to understand the function of ginseng spermidine synthase gene, a key gene involved in biosynthesis of polyamines, transgenic plant was generated in Arabidopsis. The transgenic plants exhibited high levels of polyamines compared to the untransformed control plants. We investigated the tolerance capacity of transgenic plants to abiotic stresses such as salinity and copper stress. In addition, transgenic plants also showed increased resistance against one of the important fungal pathogens of ginseng, the wilt causing Fusarium oxysporum and one of important bacteria, bacterial blight causing Pseudomonas syringae. However, an activity of the polyamine catabolic enzyme, diamine oxidase (DAO) was increased significantly in F. oxysporum and P. syringae infected transgenic plant. Polyamine catabolic enzymes which may trigger the hypersensitive response (HR) by producing hydrogen peroxide ($H_2O_2$) seem act as an inducer of PR proteins, peroxidase and phenyl ammonium lyase activity. The transgenic plants also contained higher antioxidant enzyme activities, less MDA and $H_2O_2$ under salt and copper stress than the wild type, implying it suffered from less injury. These results strongly suggest an important role of spermidine as a signaling regulator in stress signaling pathways, leading to build-up of stress tolerance mechanisms.

• Journal of the Korean GEO-environmental Society
• /
• v.15 no.11
• /
• pp.13-19
• /
• 2014

Permeable reactive barrier has been recognized as the one of representative methods for remediation of contaminated groundwater. Reactive barrier system containing two and more reactive materials can remove multiple contaminants such as nutritive salts and heavy metals. In this study, removal efficiency of multiple contaminants was evaluated when both zeolite and basic oxygen furnace slag were used as reactive materials. Sequential batch test which consists of two materials was performed to evaluate removal efficiency comparing the reaction order of them against nutritive slats including ammonium and phosphate and heavy metal including cadmium. As a result, zeolite-basic oxygen furnace slag sequence batch test showed the best efficiency for removal of multiple contaminants including nutritive salts and heavy metal.

• Applied Chemistry for Engineering
• /
• v.5 no.1
• /
• pp.74-80
• /
• 1994

Synthesis of benzophenone by oxidation of diphenylmethane at room temperature is studied using Aliquat 336 as phase transfer catalyst and potassium tert-butoxide as base. No other study has shown that diphenylmethane can be oxidized to benzophenone with quaternary ammonium salt as phase transfer catalyst. However, in presence of Aliquat 336, higher than 30% of benzophenone was yielded. The conversion of diphenylmethane was increased with increasing amount of Aliquat 336 and Potassium tert-butoxide. Higher partial pressure of oxygen favored conversion of diphenylmethane and selectivity of benzophenone by increasing the concentration of oxygen in organic solvent A reaction mechanism involving the role of Aliquat 336 was also proposed.

• Korean Journal of Materials Research
• /
• v.11 no.10
• /
• pp.869-878
• /
• 2001

Alumina $(Al_2O_3)$ green bodies were fabricated by gel-casting using three kinds of alumina with different particle size (mean particle size: 4.6 $\mu\textrm{m}$, 0.32 $\mu\textrm{m}$, 10nm). The effects of particle size on gel-casting process and green microstructure were investigated. The optimum dispersion conditions using ammonium salt (D-3019) as dispersant were 0.2 wt% (4.63 $\mu\textrm{m}$), 0.5 wt% (0.32 $\mu\textrm{m}$), and 5.0 wt% (10 nm), in high solid loading. The optimum solid loading of each starting material for gel-casting was obtained as 59 vol% (4.63 $\mu\textrm{m}$), 57 vol% (0.32 $\mu\textrm{m}$), 15 vol% (10 nm), depending on particle size, indicating that nano-size particle (10 nm) represent lower solid loading as high specific surface area than those of other two starting materials. The drying at ambient conditions (humidity; $\thickapprox$90%) was performed more than 48hrs to enable ejection of the part from the mold and then at $120^{\circ}C$ for 2hrs in an air oven, showing no crack and flaw in the dried green bodies. The pore size and distribution of the gelcast green bodies showed the significant decrease with decreasing particle size. Green microstructure was dependent on the pore size and distribution due to the particle size, and on the deairing step. The green density maximum obtained was 58.9% (4.63 $\mu\textrm{m}$), 60% (0.32 $\mu\textrm{m}$), 47% (10 nm) theoretical density (TD), and the deairing step applied before gel-casting did not affect green density.