• 한국응용과학기술학회지
• /
• 제20권1호
• /
• pp.44-50
• /
• 2003

We studied on the preparation and evaluation of O/W type microemulsion containing "wax, liquid paraffine and quaternary ammonium salt". And also it was obtained to stability of microemulsions by mono ethylene glycol(MEG) addition. The microemulsions were generally prepared at 96${\sim}$97$^{\circ}C$ by the phase inversion method. We used polyoxyethylene(20) sorbitan monooleate(POE(20)SMO) and distearyl dimethyl ammonium chloride(D.D.A.C.) as the emulsifiers at microemulsion preparation. From the results, we could get best condition for microemulsion preparation, in case of oil phase, montanic ester wax ; 1.1wt%, paraffine wax ; 1.1wt%, liquid paraffine ; 3.1wt%, propylene glycol ; 0.6wt% and ethylene glycol monobutyl ether ; 0.6wt%, when the ratio(wt%) of D.D.A.C. and POE(20)SMO were 2 : 3. And also we could obtained that the distributed particle size of the final microemulsions were about 8${\pm}$1.5nm and the mean particle size was 7${\pm}$0.5nm. We got following results from final microemulsions that the percent of transmittance; 96${\sim}$98% at 700nm. And the microemulsion blended with MEG of 5${\sim}$15wt% showed smaller particle size and more stable distribution than non-containing MEG.

• Macromolecular Research
• /
• 제16권8호
• /
• pp.725-733
• /
• 2008

Polyimide (PI) multilayer thin films were prepared by spin-coating from a poly(amic acid) (PAA) and poly(amic acid) ammonium salt (PAAS). PI was prepared from pyromellitic dianhydride (PMDA) and 4,4'-oxydianiline (ODA) PAA. Different compositions of PAAS were prepared by incorporating triethylamine (TEA) into PMDA-ODA PAA in dimethylacetamide. PI multilayer thin films were spin-coated from PMDA-ODA PAA and PAAS. The PAAS comprising cationic and anionic moieties were spherical with a particle size of $20{\sim}40\;nm$. Some particles showed layers with ammonium salts, despite poor ordering. Too much salt obstructed the interaction between the polymer chains and caused phase separation. A small amount of salt did not affect the interactions of the interlayer structure but did interrupt the stacking between chains. Thermogravimetric analysis (TGA) showed that the average decomposition temperature of the thin films was $611^{\circ}C$. All the films showed almost single-step, thermal decomposition behavior. The nanostructure of the multilayer thin films was confirmed by X -ray reflectivity (XRR). The LF 43 film, which was prepared with a 4:3 molar ratio of PMDA and ODA, was comprised of uniformly spherical PAAS particles that influenced the nanostructure of the interlayer by increasing the interaction forces. This result was supported by the atomic force microscopy (AFM) data. It was concluded that the relationship between the uniformity of the PAAS particle shapes and the interaction between the layers affected the optical and thermal properties of PI layered films.

• Bulletin of the Korean Chemical Society
• /
• 제25권11호
• /
• pp.1641-1644
• /
• 2004

Several [2]- and [3]rotaxanes bearing some functional groups on their wheel components and spacers with different lengths between two ammonium centers on their dumbbell components were prepared in good yields from dibenzo-24-crown-8-ether derivatives and dumbbell-shaped bis(sec-ammonium salt)s having a centrally located disulfide linkage, by utilizing the reversible thiol-disulfide interchange reaction. The shuttling behaviors of the [2]rotaxanes were investigated by $^1H$ NMR by use of the spin polarization transfer-selective inversion recovery technique. It was found that the change in spacer length in the axle resulted in a drastic change in shuttling rate of the [2]rotaxanes, although the introduction of the functional groups to the wheels did not affect the shuttling behavior at all.

• 한국응용과학기술학회지
• /
• 제27권4호
• /
• pp.399-406
• /
• 2010

This study was performed to test the flame retardancy of zelkova sarrata-based materials by the treatment of ammonium salts. Zelkova sarrata plate was soaked by the treatment with three 20 wt% ammonium salt solutions consisting ammonium chloride (AMSL), monoammonium phosphate (MAPP), and diammonium phosphate (DAPP), respectively, at the room temperature. After the drying specimen treated with chemicals, combustion properties were examined by the cone calorimeter (ISO 5660-1). When the ammonium salts were used as the retardant for zelkova sarrata, the flame retardancy improved due to the treated ammonium salts in the virgin zelkova sarrata. However the specimen shows increasing CO over virgin zelkova sarrata and It is supposed that toxicities depend on extents. Also, the specimen with ammonium salts showed the higher total smoke release (TSR) than that of virgin plate. Of specimens treated with ammonium salts the ammonium chloride handled the test side was considered a improved inhibitory effect of combustion.

• 폴리머
• /
• 제30권3호
• /
• pp.224-229
• /
• 2006

3-Aminopropyldimethylethoxysilane (AS)과 methyliodide를 이용하여 4차 암모늄 실란을 제조하고 7,7,8,8-tetracyanoquinodimethane (TCNQ)과 methyliodide 및 요오드화 리튬을 이용하여 $Li^+TCNQ^-$를 제조하였다. 제조한 4차 암모늄 실란에 $Li^+TCNQ^-$를 가하여 4차 암모늄 실란-TCNQ adduct(ST)를 제조하고 이를 말단에 OH기를 갖는 poly(dimethylsiloxane) (PDMS)과 축합반응시켜 poly(dimethylsiloxane)-ST adduct(PST)를 제조하였다. PST 변성 말레화 폴리에틸렌(PST-g-MPE)은 말레화 폴리에틸렌과 PST를 internal mixer(Rheomix 600P)를 사용하여 용융중합으로 제조하였으며 여기에 카본블랙 (CB)의 함량을 변화시켜 PST-g-MPE/CB 및 MPE/CB 복합체를 제조하였다. 제조한 복합체의 열적 특성을 측정한 결과 유사한 열분해 온도를 나타내었다. PST-g-MPE/CB 복합체의 인장강도는 카본블랙의 함량 증가에 따라 $200\sim308MPa$로 증가하였으며 모폴로지를 측정한 결과 MPE/CB 복합체보다 PST-g-MPE/CB 복합체의 경우에서 카본블랙의 분산이 보다 더 잘 이루어졌음을 확인하였다.

• 대한가정학회지
• /
• 제33권3호
• /
• pp.243-253
• /
• 1995

This study has been carried out for the antimicrobial effects of organic silicon quaternary ammonium salt with which cotton, polyester, and wool were treated respectively, using Esherichia coli and Proteus bulgaris which are experimental bacteria for clothing materials. As a results, the best antimicrobial effects of organic silicon quaternary ammonium salt came out from cotton ; the next form wool ; and lower from polyester. With the changes of the temperature, the antimicrobial effect with soaking time, there was no changes with cotton after 10 minutes passed. It seemed to have reacted entirely in the early stage. The longer the soaking duration was, the higher the effect from polyester was. The effect from wool was increased until 20 minutes, but decreased after 30 minutes. The optimal processing condition of cotton was in the condition of liquor ratio 40:1, concentration 0.5%, soaking time 5 minutes, and temperature 3$0^{\circ}C$ ; wool was 1.5%, 20 minutes, and 6$0^{\circ}C$ ; polyester was 2.0%, 30 minutes, and 3$0^{\circ}C$ respectively. The changes of the effect by washing was as followings : The processing effect on cotton and wool appeared to be everlasting, since they had no changes by washing 10 times ; while, it was remarkablely decreased with polyester by washing only once, and was almost disappeared after washing 10 times, which means that polyester has no durability to washing.

• 한국응용과학기술학회지
• /
• 제25권2호
• /
• pp.226-231
• /
• 2008

In this study, benzoxazolo carbocyanine is of industrial importance as green-sensitizing dye in the spectral sensitization. Sensitizing dye was prepared by the reaction of 2-methyl-3-sulfopropyl-4,5-benzoxazolium (inner salt) with triethyl orthobenzoate in the presence of triethylamine. The product was identified by using various analytical tools such as elemental analyzer, IR spectrophotometer, UV-Vis spectrophotometer, $^1H$-NMR spectrometer, TGA and DSC. The maximum absorption peak in methanol solvent was 507 nm. Therefore, it was concluded that benzoxazolo carbocyanine dye can be used as sensitizing dye for the spectral sensitization of photographic emulsion and color cosmetics.

• 한국응용과학기술학회지
• /
• 제31권3호
• /
• pp.416-421
• /
• 2014

Naphthothiazolo carbocyanine is of industrial importance as red-sensitizing dye in the spectral sensitization. Sensitizing dye was prepared by the reaction of 2-methyl-3-sulfopropyl-4,5-naphthothiazolium (inner salt) with triethyl orthopropionate in the presence of triethylamine. The product was identified by using various analytical tools such as elemental analyzer, IR spectrophotometer, UV-Vis spectrophotometer, $^1H$-NMR spectrometer, TGA and DSC. The maximum absorption peak in methanol solvent was 578nm. Therefore, it was concluded that naphthothiazolo carbocyanine dye can be used as sensitizing dye for the spectral sensitization of photographic emulsion and color cosmetics.

• Bulletin of the Korean Chemical Society
• /
• 제25권3호
• /
• pp.347-348
• /
• 2004

• Bulletin of the Korean Chemical Society
• /
• 제25권10호
• /
• pp.1451-1452
• /
• 2004