• Journal of Life Science
• /
• v.14 no.4
• /
• pp.608-613
• /
• 2004

Pyrimidine nucleotide N-ribosidase (pyrimidine 5'-nucleotide phosphoribo (deoxyribo) hydrolase/pyrimidine 5'-nucleoude nucleosidase, EC 3.2.2.10) directly catalyzes pyrimidine 5'-nucleotide to pyrimidine base and ribose (deoxyribo) 5-phosphate. In order to clarify the best nutritional conditions for the growth and the pyrimidine nucleotide N-ribosidase production of Pseudomonas oleovorans ATCC 8062 the effects of various nutrients such as different carbon and nitrogen sources were studied. For the both the growth and the enzyme production, 2% fumarate, 1.5% peptone, 5% corn steep liquor (CSL) and 1% ammonium chloride were excellent carbon and nitrogen sources, respectively. Optimum pH, temperature, and cultivation time for the enzyme production were 7.0, $28^{\circ}C$, and 48 h, respectively. The pyrimidine nucleotide N-ribosidase of P. oleovorans ATCC 8062 was not induced by UMP and its derivatives, and was constitutive enzyme.

• KSBB Journal
• /
• v.9 no.3
• /
• pp.287-293
• /
• 1994

A bacterium isolated from waste coal mine water around Hawsun had an ability for the degradation of hydrogen sulfide. The isolate was identified as Thiobacillus sp. IW. on the basis of its morphological, physiological and chemotaxonomical characteristics. The optimum pH and temperature were 7 and $30^{\circ}C$, respectively. Growth occurred in a pH range of 3 to 9. Due to the sulfate accumulated in liquid medium, the pH decreased. As a consequence the cell growth was inhibited. Potasium nitrate and glutamic acid were utilized as a nitrogen source but urea and ammonium chloride not consumed. Denitrification occurred in a basal medium containing the glucose but did not in a basal medium containing the malate. The maximum specific growth rate of cell was 0.78h-1 and generation time was 0.9 hour. The cell productivity was 6.25mg/1$.$h and the isolate grew logarithmically up to 18 hour. These results indicate that the isolate can be a suitable bacterium responsible for degradation of hydrogen sulfide as malodorous compounds.

• Membrane Journal
• /
• v.11 no.3
• /
• pp.109-115
• /
• 2001

Pore-filled ion-exchange membranes in which polypropylene(PP) microporous membrane was used as a nascent membrane were prepared by an in-situ cross-linking technique. Poly(vinylbenzyl chloride)(PVBCI) reacted with piperazine(PIP) or 1,4-diaminobicyclo[2,2,2]octane(DABCO) in a di-methylforamide(DMF) solution was filled in the pores of the microporous base membrane. After gellation the remaining chloromethyl groups were, then reacted with an amine such as trimethylamine to form positively charged, ammonium site. This will produce the pore-filled anion-exchange membrane. It was shown that this simple 2 step procedure gave dimensionally stable, pore-filled membranes in which the MG of polymer gel and degree of cross-linking could be easily controlled by the concentration of PVBCI and cross-linker in the starting DMF solution. Specially, high water permeability (7.8 kg/$m^2$hr, host membrane: PP3, MG: 73%, degree of cross-linking: 10%, crosslinker: PIP) at ultra low pressure(100 kPa) indicates the produced pore-filled membranes is usable as a water softening membrane.

• Journal of Microbiology and Biotechnology
• /
• v.22 no.10
• /
• pp.1412-1422
• /
• 2012

The aim of this work was to establish the optimal conditions for production of carboxymethylcellulase (CMCase) by a newly isolated marine bacterium using response surface methodology (RSM). A microorganism producing CMCase, isolated from seawater, was identified as Cellulophaga lytica based 16S rDNA sequencing and the neighborjoining method. The optimal conditions of rice bran, ammonium chloride, and initial pH of the medium for cell growth were 100.0 g/l, 5.00 g/l, and 7.0, respectively, whereas those for production of CMCase were 79.9 g/l, 8.52 g/l, and 6.1. The optimal concentrations of $K_2HPO_4$, NaCl, $MgSO_4{\cdot}7H_2O$, and $(NH_4)_2SO_4$ for cell growth were 6.25, 0.62, 0.28, and 0.42 g/l, respectively, whereas those for production of CMCase were 3.72, 0.54, 0.70, and 0.34 g/l. The optimal temperature for cell growth and the CMCase production by C. lytica LBH-14 were $35^{\circ}C$ and $25^{\circ}C$, respectively. The maximal production of CMCase under optimized condition for 3 days was 110.8 U/ml, which was 5.3 times higher than that before optimization. In this study, rice bran and ammonium chloride were developed as carbon and nitrogen sources for the production of CMCase by C. lytica LBH-14. The time for production of CMCase by a newly isolated marine bacterium with submerged fermentations reduced to 3 days, which resulted in enhanced productivity of CMCase and a decrease in its production cost.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.4
• /
• pp.1770-1774
• /
• 2011

This paper was to characterize the transfer of diacylglycerol(DAG) from lipophorin to Manduca sexta larval fat bodies. $[^3H]$-DAG-labeled Lp($[^3H]$-DAG-Lp) was incubated with the larval fat bodies under different times and the time of DAG transfer was determined. Incubation of fat bodies with $[^3H]$-DAG-Lp resulted in accumulation of DAG and TAG in the tissue. The transfer of $[^3H]$-DAG was inhibited in the presence of suramin and unlabeled lipophorin, which would be consistent with a lipophorin receptor. The effects of suramin may be complex because it can change membrane properties when bound to the lipophorin receptor and affect the rate of DAG transfer. To investigate the lipid uptake via receptor-mediated endocytosis, we treated with endocytosis inhibitors, ammonium chloride and chloroquine. The results show that the transfer process of lipid by lipophorin and fat bodies is receptor-mediated endocytosis.

• Polymer(Korea)
• /
• v.38 no.1
• /
• pp.16-23
• /
• 2014

A novel poly(AM-DMDAAC)/MMT superabsorbent nanocomposites are prepared by radical polymerization using ammonium persulfate (APS) and anhydrous sodium sulfite as a free radical initiator and N,N-methylene bisacrylamide (MBA) as a crosslinker. In this paper, an optimization study on the synthesis of superabsorbent nanocomposites is carried out. Orthogonal array experiment indicates that the optimized conditions is acrylamide (AM) content 23 wt%, diallyl dimethyl ammonium chloride (DMDAAAC) content 6 wt%, montmorillonite (MMT) content 4 wt%, initiator content 0.2 wt% and crosslinker content 0.02 wt%. Under the optimization syntheses conditions concluded, the maximum water absorbency in distilled water is $659.53g{\cdot}g^{-1}$ and in 2 wt% sodium chloride solution is $116.25g{\cdot}g^{-1}$. Compared with the range values of different factors ($R_j$), the order of significance factors in distilled water is C (MMT) > B (DMDAAC) > A (AM) > D (crosslinker) > E (initiator). MMT is intercalated during polymerization reaction and a nanocomposite structure is formed as shown by TEM analysis and XRD analysis.

• Journal of Life Science
• /
• v.23 no.4
• /
• pp.542-553
• /
• 2013

The aim of this work was to establish the optimal conditions for the production of cellobiase by a marine bacterium, Cellulophaga lytica LBH-14, using response-surface methodology (RSM). The optimal conditions of rice bran, ammonium chloride, and the initial pH of the medium for cell growth were 100.0 g/l, 5.00 g/l, and 7.0, respectively, whereas those for the production of cellobiase were 91.1 g/l, 9.02 g/l, and 6.6, respectively. The optimal concentrations of $K_2HPO_4$, NaCl, $MgSO_4{\cdot}_{7H2}O$, and $(NH_4)_2SO_4$ for cell growth were 6.25, 0.62, 0.28, and 0.42 g/l, respectively, whereas those for the production of cellobiase were 4.46, 0.36, 0.27, and 0.73 g/l, respectively. The optimal temperatures for cell growth and for the production of cellobiase by C. lytica LBH-14 were 35 and $25^{\circ}C$, respectively. The maximal production of cellobiase in a 100 L bioreactor under optimized conditions in this study was 92.3 U/ml, which was 5.4 times higher than that before optimization. In this study, rice bran and ammonium chloride were developed as carbon and nitrogen sources for the production of cellobiase by C. lytica LBH-14. The time for the production of cellobiase by the marine bacterium with submerged fermentations was reduced from 7 to 3 days, which resulted in enhanced productivity of cellobiase and a decrease in its production cost. This study found that the optimal conditions for the production of cellobiase were different from those of CMCase by C. lytica LBH-14.

• Korean Journal of Soil Science and Fertilizer
• /
• v.6 no.3
• /
• pp.159-163
• /
• 1973

A by-product from glutamic acid fermentation prepared by treating the fermentation residue with sulfuric acid and ammonium hydroxide was studied in the light of its chemical properties by chemical analysis and X-ray diffraction technique. Its effectiveness as fertilizer was also investigated with corn as test plant. The results are summarized as following. 1. The chemical analyses and study with X-ray diffraction technique revealed that the by-product contains an appreciable quantity of water soluble ammonium as ammonium sulfate and ammonium chloride, water soluble amino acid and in-soluble organic carbon. Particularly, the X-diffraction pattern of the material indicated the presence of unidentified water soluble double salt of ammonium sulfate and ammonium chloride. 2. The water soluble ammonium in this material was found to be as effective as urea on the growth of corn plant. 3. The organic portion of the material was found to be equally effective on the growth of corn plant as the other sources of organic matter such as compost and rice bran. It was, however found that the organic matter in the fermentation residue is more persisting in the soil than the compost and rice bran. 4. It was noticed that the application of the fermentation by-product, lowers the soil pH significantly. Inspite of the pH lowering effect, the absorption of iron by corn plant was surpressed by the application of this material.

• Journal of Korean Society for Atmospheric Environment
• /
• v.24 no.E1
• /
• pp.24-31
• /
• 2008

In this study, a new PM (particulate matter) sampler was developed and fabricated to collect fine particles in the atmosphere, and laboratory and field tests were carried out to evaluate the performance of the sampler. The PM sampler, which was based on impingers, employed an aerosol condensation system as a PM magnifier to improve its collection efficiencies. Sodium chloride, ammonium sulfate and ammonium nitrate aerosols were used as test particles, because these components are rich in ambient aerosols. As a result, it was found that the collection efficiency of the novel PM sampler was very high. Thus, it is believed that the PM sampler is an effective device for sampling fine particles. In addition, it was demonstrated that this work could contribute to the collection or removal of fine particles and be applied to the semicontinuous sampling of ambient aerosols for chemical composition analysis.

• Journal of the Korean Applied Science and Technology
• /
• v.21 no.4
• /
• pp.335-344
• /
• 2004

In this work, the properties as polishing wax for automobile of O/W type microemulsion containing wax, liquid paraffine and quaternaryammonium salt was investigated. The microemulsions were prepared at $96{\sim}97^{\circ}C$ by the phase inversion method, and polyoxyethylene(20) sorbitan monooleate (POE(20)SMO) and distearyl dimethyl ammonium chloride(D.D.A.C) as the emulsifiers were used. The mean particle size of the rnicroemulsions was about 7${\pm}$0.5nm and as the properties of polishing wax, gloss increased degree, water resistant gloss degree, initial and final contact angle after water resistance were tested. The result was that the value of water resistantance and contact angle were decreased with increasing amount of POE(20)SMO and D.D.A.C., while the gloss degree values did not affected. And the rnicroemulsion blended with mono ethylene glycol(MEG) of 5${\sim}$15wt% showed smaller particle size and more stable particle size distribution than without MEG. Finally, this microemulsion showed more excellent values of gloss degree, the water resistant gloss degree and contact angle, than two kinds of commercial polishing wax for automobile.