• Journal of the Korean Wood Science and Technology
• /
• 제40권5호
• /
• pp.335-342
• /
• 2012

To prepare the eco-friendly fire retardant wood, Japanese red pine (Pinus densiflora), Hemlock (Tsuga heterophylla), and Radiata pine (Pinus radiata) were treated with inorganic chemicals, such as sodium silicate, boric acid, ammonium phosphate, and ammonium borate. Different combination and concentration of those chemicals were impregnated by vacuum/pressure treatment methods. The electron-beam treatment was used to increase the chemical penetration into the wood. The fire performance of the fire retardant treated wood was investigated. The penetration of chemicals into the wood was enhanced after electron beam treatment. Ignition time of the treated wood was the most effectively retarded by sodium silicate, ammonium phosphate, and ammonium borate. The most effective chemical combination was found at 50% sodium silicate and 3% ammonium borate, which satisfied flammability criteria for a fire retardant material in the KS F ISO 5660-1 standards.

• Bulletin of the Korean Chemical Society
• /
• 제9권2호
• /
• pp.77-80
• /
• 1988

A suituable choice of supporting electrolyte medium for trace level determinations of chromium(VI) by differential pulse polarography is described. A comparative study suggests that sodium borate buffer is superior to ammonium acetate, ammonium tartrate, and especially to NaF which was recently known to be one of the most proper medium for the purpose. With 0.01 M borate, the best combination of high sensitivity, well-defined base line, and freedom from common interferents was attained. With $5.0{\times}10^{-7}$M Cr(VI), tenfold excesses of Cu(II) and Fe(III), and a five hundred-fold excess of $Cl^-$ do not change the peak current by more than about 1%. And the detection limit was $5.0{\times}10^{-8}$M Cr(VI).

• Journal of the Korean Wood Science and Technology
• /
• 제10권3호
• /
• pp.180-188
• /
• 1982

경질섬유판(硬質纖維板)의 내화처리방법(耐火處理方法)의 개선(改善)으로 인한 내화성(耐火性) 및 섬유판(纖維板)의 물리(物理) 및 기계적 성질(性質)을 구명(究明)하고자 시차열분석(示差熱分析) thermogram을 이용(利用)하여 제(第)1 및 제(第)2 인산(燐酸)암모늄에 붕사 및 붕산의 네 가지 내화제(耐火劑)를 각각(各各) 단용 또는 혼합(混合)하여 열압에 의(依)해 내부침투 시켜 처리한 결과(結果)는 다음과 같다. 1) 내화처리(耐火處理) 경질섬유판(硬質纖維板)은 무처리(無處理) 섬유판(纖維板)보다 비중(比重), 흡수율(吸水率), 휨강도(强度)가 증가하였고 물리(物理) 및 기계적성질이 더 개선(改善)되었다. 특히 휨강도(强度)에 있어서 제(第)1 인산(燐酸) 암모늄이 타(他) 내화제(耐火劑)보다 휨강도가 높았고 혼합(混合) 내화제(耐火劑)의 처리 경우(제 1 인산암모늄, 제 2 인산암모늄, 붕사) 충진에 따른 휨강도(强度)는 $30{\times}30cm$에 10gr의 처리가 제일 높았으며 20gr, 30gr의 경우는 이보다 떨어지나 무처리에 비(比)해서는 높은 결과(結果)를 보였다. 2) 함수율(含水率)은 처리와 무처리 사이에 뚜렷한 차(差)가 없으나 30gr의 1충진시 함수율이 약간 높았다. 3) 시차열분석(示差熟分析) thermogram에 의(依)한 내화도(耐火度) 차(差)를 보면 제1인산(第1燐酸) 암모늄과 제2인산(第2燐酸) 암모늄 및 붕사(硼砂) 혼합(混合) 내화제(耐火劑)가 내화성능(耐火性能)이 제일 우수하였으며 충진에 따른 내화효능(耐火效能)은 증가하고 있음을 나타냈다.

• Journal of the Korean Wood Science and Technology
• /
• 제42권2호
• /
• pp.157-162
• /
• 2014

This study was conducted to examine the functionality of the fire retardant treated wood. The hygroscopic property, leaching resistance, metal corrosive efficacy and gas toxicity of retardant treated wood were analyzed. Sodium silicate was penetrated to the wood for making fire retardant treated wood. The subsequent treatment agents such as boric acid, ammonium borate, di-ammonium phosphate were treated after sodium silicate treatment due to fixation. As results for the test, the leaching resist was improved by subsequent treatment. The fire retardant combination such as sodium silicate, boric acid and di-ammonium phosphate showed high hygroscopic property, metal corrosive efficacy. The gas toxicity was also satisfied KS standard.

• 한국전기전자재료학회논문지
• /
• 제23권11호
• /
• pp.843-847
• /
• 2010

This paper in concerned with the electrochemical properties for supercapacitor of composition with variation of super P/MWCNTs(multi-walled carbon nanotubes) contents. Electrochemical properties of the super P/MWCNTs were measured by cyclic voltammetry at the scan rates of 0.5 mV/s is $TEABF_4$(tetra-ethyl-ammonium-tetra-fluoro-borate) as electrolytes. As a result, the composition for 6 wt% content of MWCNTs led to an increase of capacitance, but DC resistance were decreased. It was found that the content and dispersion appearance of MWCNTs was attributed to the increase in capacitance and lower DC resistance.

• Bulletin of the Korean Chemical Society
• /
• 제22권12호
• /
• pp.1345-1349
• /
• 2001

New quadruply-bridged calix[6]arenes (I-V) have been studied as cesium selective ionophores in poly(vinyl chloride) (PVC) membrane electrodes. PVC membranes were prepared with dioctyl sebacate (DOS) or 2-nitrophenyl octyl ether (o-NPOE) as the sol vent mediator and potassium tetrakis(p-chlorophenyl)borate as the lipophilic salt additive. These ionophores produced electrodes with near-Nernstian slope. The selectivity coefficients for cesium ion with respect to alkali, alkaline earth and ammonium ions have been determined. The lowest detection limit (logaCs+ = -6.3) and the higher selectivity coefficient (logkpotCs+,Rb+ = -2.1 by SSM, -2.3 by FIM for calix[6]arene I) for Cs+ have been obtained for membranes containing quadruply-bridged calix[6]arenes (I, Ⅱ, Ⅲ), which have no para t-butyl substituents on the bridging benzene ring.

• 자원환경지질
• /
• 제38권6호
• /
• pp.657-662
• /
• 2005

Extractions fro fertilizer and soil samples were performed to yield the operationally defined fractions 'soluble' chromate (extractable with $NH_4NO_3$), 'exchangeable' chromate (extractable with phosphate buffer pH 7.2), and these results were compared with the data obtained by extractions with ammonium sulfate, borate buffer pH 7.2, saturated borax pH 9.6, and polyphosphate (Graham's salt). In order to maintain the pH of extractant solution about constant, the concentration of extractant buffer had to be raised to at least 0.5 M. The results strongly depended on the kind of extractant, and the solid: liquid ratio. For most of the samples investigated, the extraction efficiency increased in the order borate-sulfate-nitrate-phosphate. Whereas the recovery of $K_2CrO_4\;and\;CaCrO_4$ added to the samples of basic slags prior to the extraction was about complete, the recovery of added $PbCrO_4$ was highly variable. In soil extracts, the color reaction was interfered from co-extracted humics, which react with the chromate in weak acid solution during the time period necessary for color reaction (1 hour). However, this problem can be overcome by standard addition and subtraction of the color of the extractant solution. In soil extract of about pH < 7, organic material reduced chromate during the extraction period also, and standard addition of soluble chromate is recommended to prove recovery and the stability of chromate in the samples. In admixtures of soils and basic slags, results for hexavalent chromium were lower than from the mere basic slags. This effect was more pronounced in phosphate than in nitrate extracts. As a proficiency test, samples low in organic carbon from contaminated sites in Hungary were tested. The results from $NH_4NO_3$ extracts satisfactorily matched the results of the Hungarian labs obtained from $CalCl_2$ extractants.

• Journal of the Korean Wood Science and Technology
• /
• 제41권6호
• /
• pp.559-565
• /
• 2013

목재사용량의 증가에 따라 목재의 화재안전성에 대한 요구가 높아지고 있다. 실내 사용 목재의 난연처리에 무기인계를 약제로 사용함으로써 환경에 대한 부담을 줄이면서 난연성능을 향상 시킬 수 있다. 수용성 약제를 가압 주입하여 목재 내 깊숙이 침투시키면 목재의 고유기능을 유지하면서 난연성능을 부여 할 수 있다. 난연제의 용탈을 억제하여 장기간 성능을 유지할 수 있는 장점도 있다. 저자들은 액상규산나트륨을 주약제로 하고, 붕산 및 인계 약제를 보조약제로 하여 목재 내로 약액을 주입하는 공정을 개발하였다. 이들 약제는 난연성능 외에 방부 및 방충성능을 지니는 약제가 포함되어 있어, 난연성능과 함께 목재 사용 시 노출될 수 있는 부후환경에서의 내후성능을 방미효력과 방부효력으로 평가하였다.

• 한국세라믹학회지
• /
• 제41권10호
• /
• pp.756-765
• /
• 2004

Colemanite($Ca_2B_6O_{11}{\cdot}5H_2O$)원광을 황산과 반응시켜 붕산을 추출하는 방법과 그 반응 기구에 대하여 연구하였다. colemanite에 황산을 첨가하고 가열하여 colemanite의 칼슘 성분을 황산칼슘으로 분리하고 붕산을 추출할 때, 첨가하는 황산 첨가량 은 colemanite에 존재하는 Ca 성분을 분리할 때 필요한 화학 양론적인 양보다 많아야 되며, 또한 초기 pH가 5 미만이어야 대부분의 colemanite가 분해되었다. 붕산으로 추출 시 영향을 주는 인자로는 분해온도, 분해시간, 황산 첨가량, 황산암모늄 첨가량, pH. 농축 정도 및 건조온도와 시간이었다. 황산 첨가 시 colemanite에 포함되어 있는 불순물 중 CaO와 MgO는 황산과 반응하여 침전을 형성하고, $SiO_2$는 불용 성분으로 황산칼슘과 함께 분리되고, $Al_2O_3,\;Fe_2O_3,\;TiO_2,\;Na_2O$ 등은 황산과 반응하여 액상 상태로 존재하였다. 이 액상에 암모니아를 첨가하여 존재하는 나머지 불순물을 수산화물 형태로 분리, 석출하였으며, pH 조정과 산성화, 농축, 재결정화 과정을 통하여 붕산을 제조하였다.

• 대한화학회지
• /
• 제33권5호
• /
• pp.484-495
• /
• 1989

질소, 산소 주게원자를 가진 리간드(EDTA, DTPA, IDA, CyDTA, OX)와 몰리브덴(V) 착물$[Et_4N)_2[MoOCl_5]$을 반응시켜 이량체 몰리브덴(V)을 합성하였다. 합성한 몰리브덴(V) 착물은 원소분석, 적외선 스펙트럼, 양성자 자기 공명 스펙트럼, 전자흡수 스펙트럼에 의해 구조를 밝혔다. 전기화학적인 환원메카니즘을 추정하기 위하여 pH $3.571∼10.725$인 $CH_3COOH/NaOOCCH_3 Na_2B_4O_7/H_3BO_3,\;NaH_2PO_4/NaOH,\;NaH_2PO_4/Na_2HPO_4, \;NH_3/NH_4Cl$ 완충용액에서 순환전압전류법, 일정전위전기량법, 분광광도법을 이용하였다. Mo-EDTA, DTPA, IDA, CyDTA 착물의 순환전압전류그램에서는 pH가 낮을 때(약 6.00 이하) 두개의 환원파가 나타났으며 제 1환원파에 관련된 전자수는 두개이고 제 2환원파에 관련된 전자수도 두개이다. pH가 높을 때(약 8.00 이상)는 한개의 환원파가 나타났으며 관련된 전자수는 네개이었다. Mo-OX, 착물의 순환전압전류그램은 pH가 약 7.2 이하에서만 얻을 수 있었고 한개의 파가 나타났으며 관련된 전자수는 네개이다.