• Journal of the Mineralogical Society of Korea
• /
• v.6 no.2
• /
• pp.122-144
• /
• 1993

The Kimhae napseok clay deposit was studied to characterize its mineralogy and genesis. Geology of the deposit is composed of Tertiary volcanic rocks and granodiorite. Tertiary volcanic rocks consist of andesitic tuff with minor interstratified tuffaceous shale, and rhyodacitic tuff. The main ore body of 2.4 to 4 m in thickness developed parallel to the bedding of andesitic tuff bed. Its strike and dip are $N70^{\circ}E-N85^{\circ}E$ and $16^{\circ}NW-32^{\circ}NW$, respectively. Two alteration zones; the propylitic zone of albite-epidote-chlorite-quartz assemblage and advanced argillic zone of pyrophyllite-dickite-alunite-diaspore assemblage are developed. Correlation of $SiO_2$ to $Al_2O_3$ shows no relation in propylitic zone, while a negative linear relation in advanced argillic zone. Chemical variation shows that $SiO_2$, $Al_2O_3$, MgO, CaO, $Na_2O$ and $K_2O$ were leached out during hydrothermal alteration. Pyrophyllite, the most abundant mineral in advanced argillic zone, occurs as low temperature 2M polytype. It is closely associated with dickite, diaspore and alunite. The Hinckley index of dickite is 0.83 showing moderate crystallinity. Na content is increasing in the M site with the increasing content of cations in the R-site. the mole percent of Na replacing K in alunite ranges from 53.2 to 71.6. It is also found that pyrophyllite grows in the dissolution site of diaspore. Plagioclase was albitized. Lowering of pH caused mainly by sulfide and sulfate decomposition resulted in preferential leaching of Si. It is inferred that aluminum released from plagioclase in the volcanic rocks as well as from the tuffaceous shale intercalated in andesitic tuff were the main sources of aluminum required for the formation of clay deposit. pH in hydrothermal fluid decreased from propylitic zone to advanced argillic zone with increasing degree of alteration. Based on experimental data reported in the literature and mineral assemblages, the formation temperature of the deposit ranges 270 to $320^{\circ}C$.

• Journal of Korean Society of Forest Science
• /
• v.81 no.1
• /
• pp.30-39
• /
• 1992

Artificial acid rain(pH2.0, 3.0, 4.0 and 5.0) was treated on the seeded pots of 4 species to examine its effects on germination, leaf injury and seedling growth. Aluminum ammonium sulfate solution (0.5, 1.0 and 2.5mM) and artificial acid rain (pH3.0, 4.0 and 5.0) were treated on the seeded germinators of 3 species to examine its effects on germination and radicle growth. Artificial acid rain was prepared by diluting sulfuric acid with ground water and ground water(pH6.5) was used as control. Artificial acid rain was sprayed to seeded pots three times per week. About 5mm of artificial acid rain was treated each time from early April to early October, 1991. Germination, seedling establishment, radicle growth, leaf injury and seedling growth were measured and compared among the treatments. The results were summarized as follows 1. Germination, seedling establishment rate of Pinus densiflora were highest on the pH5.0 pot whereas those of Ailanthus altissima was highest on the control pot, and those of Magnolia sieboldii showed the highest value on the pH3.0 pot. 2. The differences in seedling height of Pinus densiflora and Pinus rigida were significant among the treatment levels of acid rain, whereas those of Magnolia sieboldii and Ailanthus altissima were not significant. Seedling heights of Pinus densiflora and Pinus rigida were highest on the pH3.0 pot, and that of Magnolia sieboldii was highest on the pH4.0 pot, and that of Ailanthus altissima was highest on the control pot. 3. Seedling dry weights of Pinus densiflora. Pinus rigida, and Ailanthus altissima differed significantly among the treatments, but that of Magnolia sieboldii did not differ. Highest seedling dry weights of Magnolia sieboldii and Ailanthus altissima were observed on the pH4.0 pot, and that of Pinus densiflora was observed on the pH3.0 pot, and that of Pinus rigida was observed on the pH5.0 pot. 4. With decrease of pH value of artificial acid rain, the number of injured needle and injured individual tended to be increased. 5. The differences in effects of soil acidity were highly significant among the treatments for all species. 6. Radicle growth of Pinus densiflora differed significantly among pH levels and aluminum concentrations.

• Journal of Environmental Impact Assessment
• /
• v.22 no.2
• /
• pp.135-145
• /
• 2013

The recycling of coal bottom ash generated from coal power plants in Korea has been limited due to heterogenous characteristics of the materials. The most common management option for the ash is disposal in landfills (i.e. ash pond) near ocean. The presence of large coarse and fine materials in the ash has prompted the desire to beneficially use it in an application such as fill materials. Prior to reuse application as fill materials, the potential risks to the environment must be assessed with regard to the impacts. In this study, a total of nine test cells with bottom ash samples collected from pretreated bottom ash piles and coal ash pond in a coal-fired power plant were constructed and operated under the field conditions to evaluate the leachability over a period of 210 days. Leachate samples from the test cells were analyzed for a number of chemical parameters (e.g., pH, salinity, electrical conductance, anions, and metals). The concentrations of chemicals detected in the leachate were compared to appropriate standards (drinking water standard) with dilution attenuation factor, if possible, to assess potential leaching risks to the surrounding area. Based on the leachate analysis, most of the samples showed slightly high pH values for the coal ash contained test cells, and contained several ions such as sodium, potassium, calcium, magnesium, chloride, sulfate, and nitrate in relatively large quantities. Three elements (aluminum, boron, and barium) were commonly detected above their respective detection limits in a number of leachate samples, especially in the early leaching period of time. The results of the test cell study indicate that the pollutants in the leachate from the coal ash test cells were not of a major concern in terms of leaching risk to surface water and groundwater under field conditions as fill materials. However, care must be taken in extending these results to actual applications because the results presented in this study are based on the limited field test settings and time frame. Structural characteristics and analysis for coal bottom ash may be warranted to apply the materials to actual field conditions.

• Korean Journal of Soil Science and Fertilizer
• /
• v.10 no.1
• /
• pp.1-6
• /
• 1977

Fifteen soils including volcanic ash, acid sulfate and degraded saline soils were investigated for Languir adsorption isotherm of ammonium using $NH_4H_2PO_4$. The results are as follows. Languir adsorption maxima of ammonium (LAMA) ranged from 2.4me/100g soil to 12.3 and the average was 5.3. Initial concentration of 30 to 60 or 40 to 80 ppm(as N) appears to be suitable for LAMA measurement. There were two LAMA in some soils. Difference between adsorption constants (bonding energy) was mostly greater than that between LAMA. LAMA ranged from 9.4% to 72% of cation exchange capacity and average was 47%. It did not show any clear tendency with CEC, pH, organic matter content, base saturation percent, P, K, Ca, Mg, Na and Si. Except volcanic ash soils which were grouped into two groups according to ammonium adsorption LAMA was significantly (r=0.951 at 1%) correlated with adsorption at 200ppm. This single concentration seems suitable for LAMA measurement. Probable mechanism of ammonium adsorption was discussed, in which the associated anions were combined with iron and aluminum and then ammonium was bound to phosphorus. Applicability of Langmuir adsorption isotherm model to the soils under field condition was also discussed.

• Journal of Environmental Science International
• /
• v.18 no.12
• /
• pp.1437-1442
• /
• 2009

Recent studies have shown that alum addition to litter results in many environmental and economic advantages, such as reductions in metal runoff, lower ammonia emission and improved poultry performance. However, no research has been conducted to evaluate the effects of different types of alum on soluble metals in poultry litter. The objective of this study was conducted to investigate changes in soluble metal from poultry litter with different types of aluminum sulfate (alum) under laboratory condition. The treatments used in this study, which were mixed in the upper 1 cm of litter or sprayed onto the litter surface, were 4 g alum, 8 g alum, 8.66 g liquid alum, 17.3 g liquid alum, 11.2 g A7 (high acid alum), and 22.4 g A7 (high acid alum)/100 g litter. Applying different types of alum to poultry litter reduced (P<0.05) concentrations of soluble Fe (9 to 54%), Cu (9 to 49%) and Zn (11 to 40%), relative to untreated litter, whereas it increased Ca and Mg (P<0.05). Mean soluble Fe and Cu levels in poultry litter from different types of alum decreased in the order: 22.4 g A7 (54% and 49%) > 17.3 g liquid alum (48% and 42%) > 8 g alum (48% and 31%) > 4 g alum (28% and 10%) > 8.6 g liquid alum (10% and 9%) > 11.2 g A7 (8.6% and 9%). Additionally, the high reduction in soluble Zn concentration was 4 g alum (40%), followed by 8 g alum (26%), 22.4 g A7 (25%), 17.3 g liquid alum (23%), 8.66 g liquid alum (18%), and 11.2 g A7 (11%), respectively. In conclusion, the current studies suggest that treating poultry litter with different types of alum can be applied to reduce soluble metal (Fe, Cu, and Zn) and to develop a production to merchandise for poultry litter that would result in reduction in pollutants from these materials. Furthermore, in order to improve environmental management in the poultry industry, the use of alum, liquid alum and high acid alum all should be provided a valid means of reducing negative environmental impact.

• The Korean Journal of Food And Nutrition
• /
• v.28 no.6
• /
• pp.1033-1044
• /
• 2015

During the Joseon period, kimchi was mostly made by heating the ingredients. Since salt was pricey at the time, in order to save salt and time, people used a method that involved destroying the cell wall by heating the vegetables. However, this method is no longer passed down. Thus, in this paper, we re-discovered how kimchi was made through heating while analyzing the recipes for kimchi during the Joseon period. There were 27 kinds of kimchi made through blanching. To keep the vegetables from becoming soggy, 2 kinds of kimchi were made by putting the ingredients in potassium aluminum sulfate water and 3 kinds were made through blanching the ingredients in limewater. There were 7 kinds of kimchi made by heating in vinegar, 5 kinds by boiling the ingredients, 6 kinds by stir-frying the ingredients, 2 kinds by stir-frying the ingredients with salt, and 3 kinds by steaming the ingredients. In order to eradicate unwanted germs, leaving only Lactobacillus, 25 kinds of kimchi were made by draining the boiled mixture. A total of 17 kinds of kimchi were made by heating the kimchi pot with compost including that of horses. For elders with weak teeth and poor digestion, 7 kinds of kimchi were made after heating, including 3 kinds of sukkkakdugi (cubed radish kimchi made with boiled radish). 3 kinds of chaekimchi (julienned kimchi) and 3 kinds of chaekkakdugi (kimchi with julienned radish) for elders existed as well.

• The Journal of Korean Medicine Ophthalmology and Otolaryngology and Dermatology
• /
• v.28 no.4
• /
• pp.74-91
• /
• 2015

Background and Objective : Asthma is a chronic inflammatory disease at the mucosa and is associated with excess production of Th2 cytokine and eosinophil accumulation in lung.Gamchomahwang-tangextract(GME) is one of the well known prescription used in oriental medicine for treating asthma. This study was designed to compare the anti-asthmatic effect of GME according to the ratio of 2 compounds.Methods : To examine the effects of GME on asthma, mice were sensitized with 100 ㎍ of OVA and 1 ㎎ of aluminum potassium sulfate(Alum; Sigma) intraperitoneally on day 1 and 15. From day 22, mice were challenged on 3 consecutive days with 5% OVA. The anti-asthmatic effects of GME were evaluated by enhanced pause(Penh), bronchoalveolar lavage fluids (BALF), inflammatory cytokine production and genes expression, serum IgE production. and histological change in lung tissue. GMEⅠ consists of ES and GU in the proportion 2:1(300 ㎎/㎏ group), GMEⅡ consist of ES and GU in the proprtion 4:1(300 ㎎/㎏ group).Results : GMEⅠ,Ⅱ generally inhibited lung inflammation, inflammatory cells infiltration and cytokine production and gene expression such as IL-4, IL-5 and IL-13 in BALF and serum IgE level. GMEⅡ significantly reduced the cytokine production and gene expression such as IL-4, IL-5 and IL-13 in BALF and GMEⅠ decreased cytokine production of IL-4, IL-13 in BALF and gene expression of IL-4, IL-5 in Lung. GMEⅡ potently inhibited the development of Penh and also reduced the number of eosinophil during OVA-induced AHR(airway hyper-reactivity). Overall the results show that GMEⅡ has more effect on inhibiting production, gene expression of cytokine, serum IgE level and development of Penh than GMEⅠ. Consequently, GMEⅡ might be more effective than GMEⅠ at inhibiting allergic asthma on the OVA-induced mice model.Conclusion : These results indicate that GME has a deep inhibitory effects on airway inflammation and hyperresponsiveness in mice model of asthma and that suppression of IL-4, IL-5, IL-13 expression and decrease of IL-4, IL-5, IL-13 production in BALF might contribute this effect. Hence, the results indicate that GME might be useful herbal medicine of allergic asthma. As a result, GMEⅡ mght be superior to GMEⅠ in the aspect of anti-asthmatic effect on the OVA-induced mice model.

• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.1
• /
• pp.159-167
• /
• 2000

In recent years, combined and separated sewer overflows (CSOs, SSOs) have been recognized as a significant pollution problem. To solve this problem a series of experiments were performed in a small scale Rapid Floc Settler (RFS) device to determine its ability in removing micro particles and dissolved materials from polluted waters. The RFS device is a compact physico-chemical wasterwater treatment system. Polyacrylamide (PAM) is used as a coagulant for treating stormwater in the RFS. The results of Jar test showed that PAM could be an excellent coagulant as compared with aluminum sulfate. and ferric chloride. In several experimental conditions, the influence of different variation parameters was tested to measure the efficiency of the RFS. Tests have been carried out with typical CSOs concentrations (50~1.000mg SS/L). The treatment efficiency with regard to SS and COD, which can be obtained at an overflow rate of $130m^3/m^2/day$, are 90% and 80%, respectively. Comparing other sedimentation technologies with RFS, the overflows rate of RFS is ten times faster. The distribution of particle size and number were analyzed. The RFS is suitable for the treatment of CSOs and also the removal of settleable and dissolved materials in urban stormwater runoff.

• Korean Journal of Poultry Science
• /
• v.31 no.4
• /
• pp.213-219
• /
• 2004

The objectives of this study were to investigate the effect of applying three different chemical additives to the litter (rice hull) on broiler performance, ammonia and carbon dioxide gas reduction in a poultry house at 6 weeks. A total of 96 broiler chicks (6 treatments$\times$4 replicates$\times$4 birds) were fed the experimental diets for 6 weeks. The chemical additives were applies as a top dressing to the litter at a rate of 200 g ferrous sulfate $(FeSO_4)$, 200 g aluminum chloride $(AlCl_3)$ + 50 g calcium carbonate $(CaCO_3)$ and 20 g potassium permanganate $(KMnO_4)$ per kg litter, while the control group did not have the three different chemicals added to the litter. There were no significant differences in broiler performance between the three chemical additives and control group. $FeSO_4\;and\;AlCl_3\;+\;CaCO_3$ treatment reduced ammonia production from the litter at 6 weeks by as much as 91 and $53\%$, respectively (P<0.05). $KMnO_4$ treatment decreased ammonia production at 6 weeks up to $69\%$ compared to the controls (P<0.05). Poultry litter amended with $AlCl_3\;+\;CaCO_3\;and\;KMnO_4$ also caused a decrease (P<0.01) in carbon dioxide productions at 6 weeks (59 and $65\%$, respectively). In conclusion, although broiler performance was not affected by the three chemical additives and control group, these results indicate that $FeSO_4,\;AlCl_3\;+\;CaCO_3\;and\;KMnO_4$ application to litter in a poultry house resulted in a significant reduction in atmospheric ammonia and carbon dioxide gas.

• Korean Journal of Agricultural Science
• /
• v.9 no.2
• /
• pp.484-493
• /
• 1982

This study was conducted to clarify the effects of daminozide (butanedioic acid mono-(2,2 - dimethylhydrazide)) sprayed 2 days be fore harvest and floral preservative solutions on longevity, quality and ethylene production of 'Georgia' cut lily for prolonging vase life and improving quality of cut lily flowers. And also the relation between ethylene production and flower senescence of cut lily was studied. 1. Lilies held in silver nitrate ($AgNO_3$) at 25 and 50 ppm were increased in solution uptake, fresh weight, and flower longevity. The solution of 2.5% sucrose+50 ppm $AgNO_3$+200 ppm aluminum sulfate+10 ppm 6-benzylamino purine prolonged vase life and improved quality of cut lily flowers. 2. Lilies sprayed with 500 ppm daminozide 2 days be fore harvest and then held in the preservative solution (5% sucrose+50 ppm $AgNO_3$+150ppm 8-hydroxyquinoline) after harvest were significantly increased in fresh weight and vase life as compared with non-sprayed (control) flowers. 3. Ethylene production from cut lily was increased by ethephon ((2-chloroethyl) phosphonic acid) treatment. The flowers producing a lot of ethylene, however, were senesced slowly instead of rapid wilting. 4. The preservative solution markedly reduced ethylene production of cut lily but prolonged vase life for only a few days. 5. These results suggest that ethylene be one of the most important factors promoting flower senescence of cut lily, but it be very difficult to prolong vase life remarkably by only inhibition of ethylene production in cut lily.