• 한국기계가공학회지
• /
• 제16권5호
• /
• pp.63-68
• /
• 2017

This study determines the selection of an appropriate jig material for the blade edge of the medical sapphire knife. The physical properties of the jig material affects the edge shape and chipping phenomenon in machining of the medical sapphire knife. If a grinding wheel is used, brittle workpieces such as sapphire are easily damaged by the propagation of cracks because the grinding force significantly increases. It is important to constantly maintain the grinding force in the grinding process of the brittle materials. The grinding force can be kept constantly by inducing the elastic deformation of the Jig material because the elastic deformation of brittle work-piece is negligibly low. The chipping phenomenon may be reduced by selecting the proper Jig material. Aluminum, copper, stainless steels and carbon steel were used as Jig materials. The experiment was conducted using a cast iron grinding wheel, which was installed on a conventional grinding machine with the ELID grinding system. The thickness and width of the chipping area were measured using an optical microscope and FE-SEM to analyze the shape of the blade edge. According to the experiment result, the chipping phenomenon decreased, and the sharp edge was formed when the jig materials with low elastic modulus were used.

• Corrosion Science and Technology
• /
• 제10권2호
• /
• pp.52-59
• /
• 2011

Corrosion of metallic materials occurs by the reaction with corrosive environment such as atmosphere, marine, soil, urban, high temperature etc. In general, reduction of thickness and cracking and degradation are resulted from corrosion. Corrosion in all industrial facilities and infrastructure causes large economic losses as well as a large number of accidents. Economic loss by corrosion has been reported to be nearly 1-6% of GNP or GDP. In order to reduce corrosion damage of industrial facilities, corrosion map as well as a systematic investigation of the loss of corrosion in each industrial sector is needed. The Corrosion Science Society of Korea in collaboration with 15 universities and institutes has started to survey on the cost of corrosion and corrosion map of Korea since 2005. This work presents the results of the survey on cost of corrosion by Uhlig, Hoar, and input-output methods, and the evaluation of atmospheric corrosion rate of carbon steel, weathering steel, galvanized steel, copper, and aluminum in Korea. The total corrosion cost was estimated in terms of the percentage of the GDP of industry sectors and the total GDP of Korea. According to the result of Input/output method, corrosion cost of Korea was calculated as 2.9% to GDP (2005). Time of wetness was shown to be categories 3 to 4 in all exposure areas. A definite seasonal difference was observed in Korea. In summer and fall, time of wetness was higher than in other seasons. Because of short exposure period (12 months), significant corrosion trends depending upon materials and exposure corrosion environments were not revealed even though increased mass loss and decreased corrosion rate by exposure time.

• Journal of Radiation Protection and Research
• /
• 제42권1호
• /
• pp.16-20
• /
• 2017

Background: The design of deuteron accelerator neutron source facilities requires reliable yield estimation of gamma-rays as well as neutrons from deuteron-induced reactions. We have so foar measured systematically double-differential thick target neutron yields (DDTTNYs) for carbon, aluminum, titanium, copper, niobium, and SUS304 targets. In the neutron data analysis, the events of gamma-rays taken simultaneously were treated as backgrounds. In the present work, we have re-analyzed the experimental data for a thick carbon target with particular attention to gamma-ray events. Materials and Methods: Double-differential thick target gamma-ray yields from carbon irradiated by 5 and 9 MeV deuterons were measured using an NE213 liquid organic scintillator at the Kyushu University Tandem accelerator Laboratory. The gamma-ray energy spectra were obtained by an unfolding method using FORIST code. The response functions of the NE213 detector were calculated by EGS5 incorporated in PHITS code. Results and Discussion: The measured gamma-ray spectra show some pronounced peaks corresponding to gamma-ray transitions between discrete levels in residual nuclei, and the measured angular distributions are almost isotropic for both the incident energies. Conclusion: PHITS calculations using INCL, GEM, and EBITEM models reproduce the spectral shapes and the angular distributions generally well, although they underestimate the absolute gamma-ray yields by about 20%.

• 복식문화연구
• /
• 제19권1호
• /
• pp.96-103
• /
• 2011

It is well known that the Petasites japonicus has been used for a long time medicine for the treatment of allergic diseases such as lacquer poisoning. However, the exact components and dyeing properties of its effects is still not known. Therefore, the purpose of this study was to investigate the dyeing property and ultraviolet-cut ability of silk and nylon fabrics that was dyed variously with the Petasites japonicus. The Petasites japonicus extract was done by boiling with distilled water at $100^{\circ}C$ for 1 hour. As mordanting agent, we used Aluminum potassium sulfate ($AlK(SO_4)_2{\cdot}12H_2O$), Copper(II) sulfate pentahydrate ($CuSO_5{\cdot}5H_2O$), Iron(II)Chloride ($FeCl_2{\cdot}4H_2O$). The best K/S value of dyeing temperature and time, all the fabrics were $100^{\circ}C$, 90min. Silk fabric was dyed yellow(0.8Y 7.6/2.2) and nylon fabric was dyed reddish yellow(10.1 YR 7.4/3.0). Silk fabric and nylon fabric was changed greenish yellow on mordanting with $CuSO_5{\cdot}5H_2O$ and $FeCl_2{\cdot}4H_2O$ respectively. And the colorfastness of washing and dry-cleaning was improved by using mordanting agent(4~5 grade). Ultraviolet-cut ability(UV-B) was showed more 90% in dyed nylon fabrics.

• 한국정보통신학회논문지
• /
• 제13권12호
• /
• pp.2662-2670
• /
• 2009

반사기 형태에 따른 경사진 빗살무늬 변환기 SAW 필터 특성을 비교하기 위해 모의실험을 통해 Langasite 기판위에 전극을 형성시켰으며, 전극재료로는 Al-Cu를 사용하였다. 모의실험을 바탕으로 입력단에는 IDT를 직렬형태로 연결시킨 block 형태로 하중을 가하는 전극 방법을 쓰고 출력단은 withdrawal 형태로 하중을 가하는 방법을 써서 제작하였다. 이를 바탕으로 광대역의 SAW 필터 전극 설계 방식에 대한 적절한 위상조건도 얻고자 시도하였다. Langasite 기판위에 형성시킨 입 출력빗살무늬 변환기 전극수는 50쌍, 두께는$5000{\AA}$으로 하였으며, 반사기 폭과 간격은 각각 $3.6{\mu}m$ 및 $2.0{\mu}m$으로 하였다. 제작한필터의 주파수 특성은 중심주파수가 대략 190MHz정도, 대역폭은 8.0MHz 정도로 측정되었으며, matching 후 return-loss는 -16dB 이하이고, 리플 특성은 4dB 정도이며, 반사에 의한 잔향은 -20dB 이하로 측정되었다.

• 한국표면공학회지
• /
• 제43권3호
• /
• pp.148-153
• /
• 2010

Transparent conducting films having a hybrid structure of GZO/Metal/GZO were prepared on glass substrates by sequential deposition using DC magnetron sputtering. Silver, copper, aluminum and zinc thin films were used as the intermediate metal layers in the hybrid structure. The electrical and optical properties of hybrid transparent conducting films were investigated with varying the thickness of metal layer or GZO layers. With increasing the metal thickness, hybrid films showed a noticeable improvement of the electrical conductivity, which is mainly dependent on the electrical property of the metal layer. GZO(40 nm)/Ag(10 nm)/GZO(40 nm) film exhibits a resistivity of $5.2{\times}10^{-5}{\Omega}{\cdot}cm$ with an optical transmittance of 82.8%. For the films with Zn interlayer, only marginal reduction in the resistivity was observed. Furthermore, unlike other metals, hybrid films with Zn interlayer showed a decrease in the resistivity with increasing the GZO thickness. The optimal thickness of GZO layer for anti-reflection effect at a given thickness of metal (10 nm) was found to be critically dependent on the refractive index of the metal. In addition, x-ray diffraction analysis showed that the insertion of Ag layer resulted in the improvement of crystallinity of GZO films, which is beneficial for the electrical and optical properties of hybrid-type transparent conducting films.

• 한국의류학회지
• /
• 제33권5호
• /
• pp.804-816
• /
• 2009

This study was aimed to analyze color characteristics of silk fabrics dyed with a variety of commercial natural dyes focusing on hue/tone system. Using eleven different natural dyes, single and sequential dyeing were performed under a variety of conditions of dye bath concentration, mordanting, and dyeing sequences. Color characteristics of dyed silk fabrics were investigated by Munsell's color notation of H V/C and PCCS (Practical Color Coordination System) tones. As results, most of yellowish natural dyes as principal shades in natural dyeing showed Y or YR for hue families while d, ltg, and g for tone, which agrees with colors frequently used in comtemporary apparel industries. As for single dyeing, some hues like R, RP, G, GY, and BG were found to have their own tones owing to the used natural dyes. For varying hues in natural dyeing, sequential dyeing is useful in that GY, G, and BG rarely appeared in single dyeing were frequently shown in sequential dyeing by combination of some dyes. In the other hands, mordanting may be employed for tone variation in that aluminum seemed to contribute to light and dull tones, copper to dull, and ferrum to garyish and dark ones. These results can be helpful to design colors for fashion fields by natural dyeing.

• 한국정보통신학회논문지
• /
• 제8권3호
• /
• pp.686-693
• /
• 2004

WCDMA용 SAW 필터를 제작하기 위하여 mathematica package를 이용한 모의 실험기를 개발하였으며, 전극재료로는 Al-Cu를 사용하였다. 모의실험한 자료를 바탕으로 전극에서 발생하는 ultimate rejection을 줄이기 위해 SFIT형태의 필터를 설계 및 제작하였다. 회절에 의한 현상을 최소화하기 위해 필터의 입력단은 block weighted IDT 형태로, 출력단은 withdrawal weighted IDT형태로 구성하였다. Langasite 기판위에 형성시킨 입 출력 빗살무늬 변환기 전극 수는 50쌍, 두께와 폭은 5000$\AA$와 1λ4(((equation omitted) 3.6$\mu\textrm{m}$)로 하였으며, IDT 전극 폭과 전극간격 은 각각 1λ/16와 1λ/8로 하였다. 제작한 SAW 필터의 특성은 중심주파수는 190MHz, 통과대역은 4MHz이며 저지대역은 -60dB이하로 측정되었다.

• 자원리싸이클링
• /
• 제22권6호
• /
• pp.73-80
• /
• 2013

해양광물자원은 크게 해저면에 부존되어 있는 해저광물자원과 해수 중에 녹아 있는 해수광물자원으로 대별된다. 해수에는 막대한 양의 유용광물이 녹아 있어 회수기술 개발이 완료되면 상업화 가능성이 큰 것으로 알려져 있다. 21세기에 들어 육상금속자원의 저품위화 및 매장량 고갈에 따라 자원 보유국들이 자원을 무기화 하는 경향이 심화되고 있다. 따라서 대부분의 금속자원을 수입에 의존하는 우리나라는 삼면이 바다인 지리적 특성을 살려 해수로부터 희유금속 회수기술 개발에 적극적으로 나설 필요가 있다. 본 연구에서 해수로부터 희유금속 회수관련 논문분석 결과, 미국이 495편의 논문을 게재하여 양적 질적으로 가장 우수한 것으로 나타났다. 연구기관별로 보면 Chinese Acad. Sci.가 152편의 논문을 게재하여 양적으로 많은 연구가 이루어졌으며, 31편의 논문을 게재한 Univ. Oxford는 질적으로 가장 우수한 것으로 나타났다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 하계학술대회 논문집 Vol.5 No.1
• /
• pp.158-161
• /
• 2004

We have studied a lifetime in organic light-emitting diodes depending on buffer layer. A transparent electrode of indium-tin-oxide(ITO) was used as an anode. And the cathode for electron injection was LiAl. Phthalocyanine Copper(CuPc), Poly(3,4-ethylenedioxythiophene):poly (PEDOT:PSS), or poly (9-vinylcarbazole)(PVK) material was used as a buffer layer. A thermal evaporation was performed to make a thickness of 40nm of TPD layer at a rate of $0.5{\sim}1\;{\AA}/s$ at a base pressure of $5{\times}10^{-6}\;torr$. A material of tris(8-hydroxyquinolinate) Aluminum($Alq_3$) was used as an electron transport and emissive layer. A thermal evaporation of $Alq_3$ was done at a deposition rate of $0.7{\sim}0.8[{\AA}/s]$ at a base pressure of $5{\times}10^{-6}\;torr$. By varying the buffer material, hole injection at the interface could be controlled because of the change in work function. Devices with CuPc and PEDOT:PSS buffer layer are superior to the other PVK buffer layer.