• Journal of Korean Society of Transportation
• /
• v.23 no.6 s.84
• /
• pp.41-53
• /
• 2005

The effective utilization of an airport is considerably influenced by natural features and man-made structures inside and outside its boundary. These obstacles affect the airspace available for approaches and departures and the weather minima which dictates the necessary weather conditions for aircraft to be allowed to take-off or land. Certain areas of the airspace near airports must be regarded as the integral parts of the airport system. The availability of the required airspace is as important as are the runway and their associated strips to the safe and efficient use of the airport. For these reasons, ICAO and the member states have established the standards regarding the obstacle limitation surfaces and regulated the construction of the man-made structures in and beyond the surfaces. Existing objects that extend above a obstacle limitation surfaces should as for as practicable be removed except when, in the opinion of the appropriate authority, an objects is shielded an existing immovable objects, or after aeronautical study it is determined that the object would not adversely affect the safety or significantly affect the regularity of operations of airplanes. However, Korea's aviation law does not specified the outer horizontal surface in the obstacle limitation surfaces, while ICAO and most member states do. The absence of the outer horizontal surface regulation has created legal disputes between regulating agencies and private parties. The case study in this paper found that a skyscraper planned beyond Korea's obstacle limitation surfaces does affect the flight safety and the efficient use of an airport. Therefore, in areas beyond the obstacle limitation surfaces. those objects which extend to a height of 150m or more above ground elevation should be regarded as obstacle, unless a special aeronautical study indicates that they do not constitute a hazard to airplanes. We proposed low alternative regulatory schemes for resolving the issues raised in this paper, and we recommended to adopt ICAO's standards and recommended practices.

• International Journal of Aeronautical and Space Sciences
• /
• v.16 no.2
• /
• pp.137-147
• /
• 2015

Hypersonic vehicles exhibit distinct dynamic and static characteristics, such as unstable dynamics, strict altitude angle limitation, large control bandwidth, and unconventional system sensitivity. In this study, compromise relations between the dynamic features and static performances for hypersonic vehicles are investigated. A compromise optimal design for hypersonic vehicles is discussed. A parametric model for analyzing the dynamic and static characteristics is established, and then the optimal performance indices are provided according to the different design goals. A compromise optimization method to balance the dynamic and static characteristics is also discussed. The feasibility of this method for hypersonic vehicles is demonstrated.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.14 no.24
• /
• pp.199-206
• /
• 1991

As the development of modern technology, human works shift whose roll from physical conditions to the system monitoring tasks. In this paper, safety-presentation configuration is discussed instead of well-known fault-warning configuration. Safety-presentation configuration is verified as superior to the fault-warning configuration in hazard prevention. The estimation of system states involves the decision making environments which lack of required in formations and most of all the informations are not precise too. And the limitation of human information processing show doubtful results. So the estimation of system states is regardes as fuzzy number, and its operation produces the parameter that explain the discriminability(d), decision criterion ($\beta$) of system operator's behaviors. These two values served as performance indices. Especially the $\beta$ is a good milestone of the operator's altitude degree of caution.

• Proceedings of the Korea Contents Association Conference
• /
• 2007.11a
• /
• pp.27-29
• /
• 2007

The visual implementation of 3-dimensional national environment is focused by the requirement and importance in the fields such as, national development plan, telecommunication facility deployment plan, railway construction, construction engineering, spatial city development, safety and disaster prevention engineering. The currently used DEM system using contour lines, which embodies national geographic information based on the 2-D digital maps and facility information has limitation in implementation in reproducing the 3-D spatial city. Moreover, this method often neglects the altitude of the rail way infrastructure which has narrow width and long length. There it is needed to apply laser measurement technique in the spatial target object to obtain accuracy. Currently, the LiDAR data which combines the laser measurement skill and GPS has been introduced to obtain high resolution accuracy in the altitude measurement. In this paper, we first investigate the LiDAR based researches in advanced foreign countries, then we propose data a generation scheme and an algorithm for the optimal manage and synthesis of railway facility system in our 3-D spatial terrain information. For this object, LiDAR based height data transformed to DEM, and the realtime unification of the vector via digital image mapping and raster via exactness evaluation is transformed to make it possible to trace the model of generated 3-dimensional railway model with long distance for 3D tract model generation.

• Journal of Aerospace System Engineering
• /
• v.9 no.2
• /
• pp.25-33
• /
• 2015

Global market of unmanned aircraft(UA) is rapidly expending based on the versatile and efficient utility of the UA. Domestically many industries, universities and research institutes are trying to do research and development of the UA in various angle of aspect. In spite of these effort, all the participants of research and development of the UA has been suffering the difficulty of acquiring the airspace around vicinity of Goheung airfield for the flight test of UA. Although the current procedure of execution of the flight test of UA is set after acquiring the airspace by applying the NOTAM(Notice To Air Man) to the Ministry of Land, Infrastructure and Transport(MLIT) at least 7 days before the flight test and commencing with the publication of the NOTAM by MLIT, if the flight test is carried out as planned, changing or reapplying the NOTAM expends mort time and makes difficulty often. Therefore it is needed that a restricted airspace for the flight test of UA is established and make all the executioner of flight test uses the exclusive airspace without limitation. This research proposes the restricted airspace with short term and long term establish requirement of airspace separately. The short term requirement has been established with the airspace of 10 nm radius and 8,000 ft altitude in which the requirements of flight test can be carried out more than 90% without needs of supplement of the additional airspace. The long term has been established within the airspace of 30 nm radius which is the maximum Radio Line Of Sight(RLOS) and 8,000 ft altitude with exclusion of current air way, airport control area, approaching corridor to the airport, existing restricted area(RA) and Military Operating Area(MOA) for the purpose of minimizing inconvenience of the other airspace user. Once establishing the exclusive airspace for the flight test of UA, research and development of industries, universities and research institutes will be more vigorous and contributes to the national economy.

• Journal of Satellite, Information and Communications
• /
• v.12 no.4
• /
• pp.157-161
• /
• 2017

Effective management of ULD (Unit Load Device) in Air Cargo Transportation is one of the Airline's main concerns. At present, the way of management of ULD which has the ID tag based on RFID is carried by cargo control staff with PDA. However, the activity of ULD management is limitted due to complexity of cargo terminal facilities. In this study, we offer the effective way of management of ULD by the DRONE equipped by LED-ID & RFID READER at the higher altitude in Air Cargo Terminal to recover the difficulty of identification due to complexity of terminal facilities. Further to the above, we suggest the operational effectiveness, limitation, and the direction of future research.

• Journal of Astronomy and Space Sciences
• /
• v.35 no.1
• /
• pp.31-37
• /
• 2018

Pc1 pulsations are geomagnetic fluctuations in the frequency range of 0.2 to 5 Hz. There have been several observations of Pc1 pulsations in low earth orbit by MAGSAT, DE-2, Viking, Freja, CHAMP, and SWARM satellites. However, there has been a clear limitation in resolving the spatial and temporal variations of the pulsation by using a single-point observation by a single satellite. To overcome such limitations of previous observations, a new space mission was recently initiated, using the concept of multi-satellites, named the Small scale magNetospheric and Ionospheric Plasma Experiments (SNIPE). The SNIPE mission consists of four nanosatellites (~10 kg), which will be launched into a polar orbit at an altitude of 600 km (TBD) in 2020. Four satellites will be deployed in orbit, and the distances between each satellite will be controlled from 10 to 1,000 km by a high-end formation-flying algorithm. One of the possible science targets of the SNIPE mission is observing electromagnetic ion cyclotron (EMIC) waves. In this paper, we report on examples of observations, showing the limitations of previous EMIC observations in low earth orbit, and suggest possibilities to overcome those limitations through a new mission.

• The Korean Journal of Air & Space Law and Policy
• /
• v.21 no.2
• /
• pp.207-230
• /
• 2006

It should be noted that current rules and provisions of the law, such as the act of military air base and the act of the construction, do not provide a fairly good solution regarding the conflict between the company and the air force. The act of military air base does not have the jurisdiction on the matters occurring outside the edge of the flight safety zone. Freezing measure about the construction permit is not suitable for this case. A sort of policy or revision of the law will be needed to foster the transaction between parties in question which may be useful for enhancing overall efficiency.

• Proceedings of the KSR Conference
• /
• 2007.11a
• /
• pp.1099-1104
• /
• 2007

The visual implementation of 3-dimensional national environment is focused by the requirement and importance in the fields such as, national development plan, telecommunication facility deployment plan, railway construction, construction engineering, spatial city development, safety and disaster prevention engineering. The currently used DEM system using contour lines, which embodies national geographic information based on the 2-D digital maps and facility information has limitation in implementation in reproducing the 3-D spatial city. Moreover, this method often neglects the altitude of the rail way infrastructure which has narrow width and long length. There it is needed to apply laser measurement technique in the spatial target object to obtain accuracy. Currently, the LiDAR data which combines the laser measurement skill and GPS has been introduced to obtain high resolution accuracy in the altitude measurement. In this paper, we first investigate the LiDAR based researches in advanced foreign countries, then we propose data a generation scheme and an algorithm for the optimal manage and synthesis of railway facility system in our 3-D spatial terrain information. For this object, LiDAR based height data transformed to DEM, and the realtime unification of the vector via digital image mapping and raster via exactness evaluation is transformed to make it possible to trace the model of generated 3-dimensional railway model with long distance for 3D tract model generation.

• Journal of Wetlands Research
• /
• v.16 no.2
• /
• pp.251-259
• /
• 2014

Recently, wetland and paddy wetland are being highlighted as the international environmental issues. However, research system which can assess paddy wetland is lacking. Thus, the purpose of this study is to assess the value of paddy wetland by applying RAM to paddy wetland. In addition, we would like to use this study as the data to establish assessment method for paddy wetland. 16 sites were selected as research targets based on altitude and soil. As the results of wetland assessment, 16 research target sites had total score of 212~227 and the average of 2.17~2.50. It was similar to those of Lacustrine Wetlands, Palustrine Wetland and Riverine Wetland which were sites in previous studies. The value could be recognized as the wetland. However, there was no difference in assessment results based on altitude and soil. It was found that all conservation values were the same. The factor the most closely affecting conservation value was the area. However, there was limitation to apply existing wetland assessment system to paddy wetland. In order to assess paddy wetland, factors such as rice farming methods, topography, vegetation, growth environment and biodiversity should be added. It was thought to supplement wetland assessment system through various further studies.