• 제목/요약/키워드: alternative sensitivity

검색결과 344건 처리시간 0.023초

유연보의 과도 진동 감쇠를 위한 점탄성 재료의 최적 분포 (Optimal Distribution of Viscoelastic Material for Transient Vibration Suppression of a Flexible Beam)

  • 김태우;김지환
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2002년도 추계학술대회논문집
    • /
    • pp.605-610
    • /
    • 2002
  • Eigenvalues are taken as performance criteria for structural damping design using viscoelastic material. Given material properties, optimal distribution of damping material is sought based on eigenvalue sensitivity. For eigenanalysis of frequency dependent viscoelastic material treated structures, Golla-Mushes-McTavish (GHM) model is used and some dominant modes are chosen for consideration. To avoid the intensity of computation caused by increased problem size, an alternative approximate method is proposed which uses elastic modes and can be applied under small damping assumption. A cantilever beam treated with unconstrained viscoelastic layer is tested and optimal distribution of thickness of the layer is illustrated. Partial coverage configurations are compared with the one-sided full coverage case.

  • PDF

변분법을 이용한 확률론적 유한요소법에 관한 연구 (A Study on the Stochastic Finite Element Method Based on Variational Approach)

  • 배동명;김경열
    • 수산해양기술연구
    • /
    • 제32권4호
    • /
    • pp.432-446
    • /
    • 1996
  • A stochastic Hamilton variational principle(SHVP) is formulated for dynamic problems of linear continuum. The SHVP allows incorporation of probabilistic distributions into the finite element analysis. The formulation is simplified by transformation of correlated random variables to a set of uncorrelated random variables through a standard eigenproblem. A procedure based on the Fourier analysis and synthesis is presented for eliminating secularities from the perturbation approach. In addition to, a method to analyse stochastic design sensitivity for structural dynamics is present. A combination of the adjoint variable approach and the second order perturbation method is used in the finite element codes. An alternative form of the constraint functional that holds for all times is introduced to consider the time response of dynamic sensitivity. The algorithms developed can readily be adapted to existing deterministic finite element codes. The numerical results for stochastic analysis by proceeding approach of cantilever, 2D-frame and 3D-frame illustrates in this paper.

  • PDF

Topology optimization of multiphase elastic plates with Reissner-Mindlin plate theory

  • Banh, Thanh T.;Lee, Dongkyu;Lee, Jaehong;Kang, Joowon;Shin, Soomi
    • Smart Structures and Systems
    • /
    • 제22권3호
    • /
    • pp.249-257
    • /
    • 2018
  • This study contributes to evaluate multiphase topology optimization design of plate-like elastic structures with constant thickness and Reissner-Mindlin plate theory. Stiffness and adjoint sensitivity formulations linked to Reissner-Mindlin plate potential energy of bending and shear are derived in terms of multiphase design variables. Multiphase optimization problem is solved through alternative active-phase algorithm with Gauss-Seidel version as an optimization model of optimality criteria. Numerical examples verify efficiency and diversity of the present topology optimization method of Reissner-Mindlin elastic plates depending on multiphase and Poisson's ratio.

Non-Vinyl Pre-Coated Metal의 스크래치 특성에 관한 연구 (The Research of Scratch Characteristics For Non-Vinyl Pre-Coated Metal Sheet)

  • 김동환;조형근;김병민
    • 한국정밀공학회:학술대회논문집
    • /
    • 한국정밀공학회 2000년도 춘계학술대회 논문집
    • /
    • pp.874-877
    • /
    • 2000
  • Pre-coated sheet materials are a cost-effective and environmentally attractive alternative to conventional sheet materials coated after forming. At present but the high scratch sensitivity of coating used for pre-coated metal sheet is a major limitation to use of these materials. Because of high scratch sensitivity, products made by pre-coated metal sheet are not formed by conventional design method. This study has been performed to investigate scratch characteristic of non-vinyl pre-coated metal (PCM) sheet. Using the simple U-bending test equipment, three non-vinyls PCM's were tested. This paper provides the results of bending tests showing the influence of sheet surface texture, tool material and process conditions. It was found that the influence of punch, die clearance and tool material had an effect upon the scratch characteristic.

  • PDF

Development of Array-based Technology for Detection of HAV Using Gold-DNA Probes

  • Wan, Zhixiang;Wang, Yefu;Li, Shawn Shun-Cheng;Duan, Lianlian;Zhai, Jianxin
    • BMB Reports
    • /
    • 제38권4호
    • /
    • pp.399-406
    • /
    • 2005
  • A sensitive method for detection of Hepatitis A virus (HAV) by utilizing gold-DNA probe on an array was developed. Amino- modified oligodeoxynucleotides at the 5' position were arrayed on an activated glass surface to function as capture probes. Sandwich hybridization occurred among capture probes, the HAV amplicon, and gold nanoparticle-supported oligonucleotide probes. After a silver enhancement step, signals were detected by a standard flatbed scanner or just by naked eyes. As little as 100 fM of HAV amplicon could be detected on the array. Therefore, the array technology is an alternative to be applied in detection of HAV due to its low-cost and high-sensitivity.

Sensitivity-Based Method for the Effective Location of SSSC

  • Eghtedarpour, Navid;Seifi, Ali Reza
    • Journal of Power Electronics
    • /
    • 제11권1호
    • /
    • pp.90-96
    • /
    • 2011
  • Congestion management is one of the most challenging aspects in the recently deregulated electricity markets. FACTS devices have been shown to be an efficient alternative to control the flow of power in lines, resulting in increased loadability, lower system loss and a reduced cost of production. In this paper, the application of a static series synchronous compensator (SSSC) for the purpose of congestion management of power systems has been studied. A sensitivity-based analysis method is utilized for effective determination of the SSSC location in an electricity market. The method is topology based and it is independent of the system operation point. A power injection p-model is developed for the SSSC in this study. Numerical results based on the modified IEEE 14 bus system with/without the SSSC demonstrate the feasibility as well as the effectiveness of the SSSC for congestion management in a network. The results obtained when using the SSSC to improve system transfer capability and congestion management is encouraging.

A comparison of RPLA and PCR for detection of enterotoxins in methicillin-resistant Staphylococcus aureus(MRSA) strains isolated in dogs

  • Park, Son-il;Han, Hong-ryul
    • 대한수의학회지
    • /
    • 제39권4호
    • /
    • pp.806-810
    • /
    • 1999
  • A multiplex-polymerase chain reaction (PCR) assay was used to detect staphylococcal enterotoxin production by 12 strains of Staphylococcus aureus isolated from clinical specimens. To evaluate the efficacy and/or sensitivity of this method, the results were compared to those obtained with the reversed passive latex agglutination kit (SET-RPLA, Denka Seiken, Japan). Of 10 strains positive by PCR were positive by RPLA but two strains, representing high sensitivity of the former method. Enterotoxin B was the most prevalent by the two methods. The kappa index between the two methods was 0.826, indicating a higher agreement and fully reliable for use. These results would suggest that sensitive, inexpensive, and relatively rapid multiplex-PCR technique may be an effective means for the detection of staphylococcal enterotoxin genes as an alternative to traditional methods such as kits or immunological methods, which depend upon the amount of enterotoxin produced.

  • PDF

수송문제에서 다수 퇴화 최적해와 민감도 분석 (Multiple Degenerate Optimal Solutions and Sensitivity Analysis of Transportation Problem)

  • 민계료;김희
    • 한국국방경영분석학회지
    • /
    • 제27권1호
    • /
    • pp.28-38
    • /
    • 2001
  • A transportation problem amy have multiple optimal solutions, if an optimal solution to the problem is degenerate. This study derives a condition, under which multiple degenerate optimal solutions exist, fro ma current degenerate optimal transportation tableau by utilizing the homogeneous equation obtained from the closed loops connecting degenerate basic variable and non-basic variables, and discusses a method of generating alternative degenerate optimal solutions and their associated transportation tableaus. Each degenerate optimal solution may not have the same range of feasibility in sensitivity analysis on supply and demand quantity due to different set of shadow prices which multiple degenerate solution have.

  • PDF

Sensitivity-based reliability analysis of earth slopes using finite element method

  • Ji, Jian;Liao, Hong-Jian
    • Geomechanics and Engineering
    • /
    • 제6권6호
    • /
    • pp.545-560
    • /
    • 2014
  • For slope stability analysis, an alternative to the classical limit equilibrium method (LEM) of slices is the shear strength reduction method (SRM), which can be integrated into finite element analysis or finite difference analysis. Recently, probabilistic analysis of earth slopes has been very attractive because it is capable to take the soil uncertainty into account. However, the SRM is less commonly extended to probabilistic framework compared to a variety of probabilistic LEM analysis of earth slopes. To overcome some limitations that hinder the development of probabilistic SRM stability analysis, a new procedure based on recursive algorithm FORM with sensitivity analysis in the space of original variables is proposed. It can be used to deal with correlated non-normal variables subjected to implicit limit state surface. Using the proposed approach, a probabilistic finite element analysis of the stability of an existing earth dam is carried out in this paper.

An Economic Analysis of Potential Cost Savings from the Use of Low Voltage DC (LVDC) Distribution Network

  • Hur, Don;Baldick, Ross
    • Journal of Electrical Engineering and Technology
    • /
    • 제9권3호
    • /
    • pp.812-819
    • /
    • 2014
  • The proposed technical work attempts to compare the two key technologies of power distribution, i.e. direct current (DC) and alternating current (AC) in a fiscal manner. The DC versus AC debate has been around since the earliest days of electric power. Here, at least four types of a low voltage DC (LVDC) distribution are examined as an alternative to the existing medium voltage AC (MVAC) distribution with an economic assessment technique for a project investment. Besides, the sensitivity analysis will be incorporated in the overall economic analysis model to cover uncertainties of the input data. A detailed feasibility study indicates that many of the common benefits claimed for an LVDC distribution will continue to grow more profoundly as it is foreseen to arise with the increased integration of renewable energy sources and the proliferation of energy storage associated with the enhanced utilization of uninterruptible power supply (UPS) systems.