• Journal of the Korean Ceramic Society
• /
• v.23 no.5
• /
• pp.67-74
• /
• 1986

To investigate the effects of unreacted silicon on the $\alpha$/$\beta$transfornation variation of morphology and mechanical strength of Sintered Reaction Bonded Silicon Nitride the mixtures of $\alpha$-$Si_3N_4$ and Si powder and Reaction Bonded Silicon Nitride were heat treated. The heat-treatments were performed in Ar atmosphere in order to inhibit the nitridation of silicon. In the mixtures heat-trated at 1$700^{\circ}C$ the amount of $\beta$-TEX>$Si_3N_4$transformed from $\alpha$-TEX>$Si_3N_4$was sigmoidally increased and the equiaxed $\alpha$-TEX>$Si_3N_4$grains elongated with the amount of silicon and heat treating time. And large $\beta$-TEX>$Si_3N_4$grains grown into silicon were observed. On the other hand there was no change in the heat-treatment of pure $\alpha$-TEX>$Si_3N_4$In case of the heat-treatment of RBSN the same phenomena due to the silicon appearing from the decomposition of $\alpha$-Smatte and needle were observed. From the three point bending test the strength of the sintered specimens with the and without 5wt% silicon addition had 53Kg/$mm^2$ and 73Kg/$mm^2$ respectively.

• Journal of environmental and Sanitary engineering
• /
• v.23 no.1
• /
• pp.25-31
• /
• 2008

A bacterial strain, Bacillus megaterium L-49 has been isolated and identified that produces alkaline ${\alpha}$-amylase. The cell is ellipsoidal, about $1.0-1.2{\times}3.0-3.6{\mu}m$ in diameter, Gram-positive, motile, and central partial central. Growth occurs in media containing 7% of NaCl. This strain could utilize D-glucose, lactose, xylose, sucrose, mannose, and maltose, and but it does not utilize D-fructose, and glycogen. Among the various concentrations of saturated ammonium sulfate, the retractation ratio in range of 70 to 100% was about 93%. However, in the case of acetone, it was about 98.7%. EDTA has activating effect and Ca2+ has no effect on alkaline ${\alpha}$-amylase activity. The alkaline ${\alpha}$-amylase has low thermal stability. The optimal temperature for reaction is $50^{\circ}C$. The alkaline ${\alpha}$-amylase activity maintained stabilizing at pH 6-11 and the optimal pH for reaction was 9-10.

• International Journal of Oral Biology
• /
• v.43 no.1
• /
• pp.29-35
• /
• 2018

It is noted that chalcone derivatives have characteristic diverse pharmacological properties, and that precise evidence has been growing that they could regulate a tumor necrosis $factor-{\alpha}$ ($TNF-{\alpha}$) induced insulin resistance. The purpose of the present investigation is to elucidate the effects of the identified chalcone derivatives on adipogenesis, and to find the underlying mechanism of action in that case. Consequently, we first investigated whether the chalcone derivatives could affect the identified $PPAR{\gamma}$-induced transcriptional activity on the proliferator-activated receptor response elements (PPRE) at target promoters, and find that trans-chalcone most significantly increased the $PPAR{\gamma}$-induced transcriptional activity. Additionally, we confirmed that there were up-regulatory effects of trans-chalcone during the adipogenesis and lipid accumulation, and on the mRNA of adipogenic factors in 3T3-L1 cells. Next, we examined the effect of trans-chalcone on the inhibition induced by $TNF-{\alpha}$ on adipogenesis. To that end, we noted that the treatment with trans-chalcone attenuated the effect of $TNF-{\alpha}$ mediated secretion of various adipokines that are involved in insulin sensitivity. For this reason, we noted that this study clearly demonstrates that trans-chalcone enhanced adipogenesis, in part, by its potent effect on $PPAR{\gamma}$ activation and by its reverse effect on $TNF-{\alpha}$.

• Preventive Nutrition and Food Science
• /
• v.12 no.3
• /
• pp.131-134
• /
• 2007

The kinetic analyses for thermal products of alpha-, gamma- and delta-tocopherols during heating as functions of temperature and time were studied. Alpha-, gamma- and delta-tocopherols dissolved in glycerol were heated at $100{\sim}200^{\circ}C$ for $5{\sim}60$ min. The thermal products were separated by hexane extraction and analyzed by HPLC using a reversed phase ${\mu}-Bondapak$ $C_{18}-column$ with two kinds of elution solvents in a gradient mode. The formation kinetics of thermal products of tocopherols followed a first-order kinetic model. The formation rate of thermal products of tocopherols was dependent on heating temperatures and heating times. The activation energy and enthalpy for the thermal products of ${\gamma}-and$ ${\delta}-tocopherols$ were higher than those for ${\alpha}-tocopherol$ as in the case of the oxidative degradation kinetics of tocopherol. The magnitude order of the activation energy was ${\gamma}->{\delta}->{\alpha}-tocopherol$.

• Journal of Nutrition and Health
• /
• v.28 no.1
• /
• pp.15-22
• /
• 1995

The antioxidant effects of aqueous green tea extracts with $\alpha$-tocopherol and lecithin dissolved in lard were investigated on the lipid metabolism in serum and liver of Sprague-Dawley male rats. Elderly male rats were fed for 8 weeks by different experimental diets containing 10% lard(w/w), 0.5% aqueous green tea extracts, 0.05% $\alpha$-tocopherol and 1.0% lecithin. By the addition of the mixture of the antioxidants, the level of total cholesterol. HDL-cholesterol and triglyceride in serum and liver were not changed. The activities of glutathione peroxidase were significantly increased in the case of addition of the antioxdant mixtures but the activities of superoxide dismutase and glutathione S-transferase were not affected.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.5 no.4
• /
• pp.343-350
• /
• 1995

A Abstract Systematic studies of the effects of crystalline forms of starting powders and p processing variables on the texture of hot - pressed silicon carbide are described. The results I indicate that hot - pressing of $\beta$ - SiC can produce strong textures and composite type duplex microstructure due to the ${\beta} {\rightarrow} {\alpha}$ phase transformation of SiC. The texture variations d during post - annealing have been observed. In the case of using a - SiC as starting pow¬d ders, the degree of preferred orientation by hot - pressing is relatively weak.

• Korean Journal of Microbiology
• /
• v.27 no.1
• /
• pp.70-76
• /
• 1989

Progestrone bioconversion by immobilized Aspergillus phoenicis was studied. Progesterone was converted into 11$\alpha$-hydroxyprogesterone and 3-minor byproducts. Whole cells of A. phoenicis were immobillized by enreappment with calcium-alginate, K-carrageenan, or polyacrylamide. Of these materials tested, cell immobilized in $Ca^{2+}$ -alginate gels showed the highest activity for 11$\alpha$-hydroxylation of progesterone. In the case of mycelia immobilized in $Ca^{2+}$-alginate, futher progressing hydroxylation of 11$\alpha$-hydroxyprogesterone was greatly reduced. Spores of A. phoenicis which were immobillized with $Ca^{2+}$-alginate and germinatedin situ for 25 hours showed higher 11$\alpha$-hydroxylase activity than those of entrapped whole mycelia and maintained initial enzyme activity for all 8 times of repeated use. After 16 times of reuse, the activity was declined 30% or more. When culture media and $Zn^{2+}$ were introduced into the reaction media, the activity of the immobilized mycelia which had been lowered due to many times of reuse was effectively reactivated.

• Journal of the Korean Ceramic Society
• /
• v.29 no.2
• /
• pp.143-151
• /
• 1992

Partially stabilized alpha-sialon composition (X=0.1) powder was hot-pressed at 1800~200$0^{\circ}C$ for 0~90 min with 30 MPa. Sintering behavior, phase changes and mechanical properties for the specimens were studied. As sintering temperature was raised from 1800 to 190$0^{\circ}C$, the relative density tended to increase and reached 99% of theoretical at 190$0^{\circ}C$. However the amount of alpha-sialon decreased because alpha-sialon transformed to beta-Si3N4 and yttrium rich silicate glass. In the case of hot-pressing at 190$0^{\circ}C$ for various times, densification increased with sintering time and full densification above 99% of theoretical was attained by 30 min. The amount of alpha-sialon decreased with sintering time. The maximum strength of 825 MPa was obtained by hot-pressing at 190$0^{\circ}C$ for 60 min.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.334-334
• /
• 2015

The results of flow feature around two circular cylinders in various arrangements are carried out using two-dimensional simulation at Reynolds number of 200. In this work, time-averaged fluid force acting on the upstream and downstream cylinders were calculated for staggered angle ${\alpha}=0{\sim}90^{\circ}$ in the range of L/D = 1.1~5, where ${\alpha}$ is the angle between the free-stream flow and the line connecting the centers of the cylinders, L is centre-to-centre distance and D is cylinder diameter. The dependence of magnitudes and trends of fluid force coefficient on the spacing ratio L/D and ${\alpha}$ are discussed. In all arrangements of two cylinders, tandem arrangement (${\alpha}=0^{\circ}$) is the case produced a minimum drag coefficient for downstream cylinder. Moreover, the locations of separation and stagnation points or pressure coefficient on surface of the cylinder were examined. Acknowledgement: "This research was a part of the project titled 'Development of integrated estuarine management system', funded by the Ministry of Oceans and Fisheries, Korea."

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.307-311
• /
• 2003

2-mass system is generally used as controller of the variable-speed to transfer electromotion power to mechanical load such as industrial robot, driving parts of electric vehicle, rolling machine system of steel plant and driving parts of elevator. In this case, PI controller is often used as a velocity controller because of simplicity of system. But PI control algorithm is not enough for obtaining the control characteristics required for this system. To solve this problem, 2-mass system based on the PID controller derives the optimum PID parameters by pole assignment and estimation of the ITAE performance index. In this case, the system have tenacious properties about disturbance, but it causes extreme overshoot and vibration because of rapidly output of controller in early transient response about desired value. And if speed control system is applied by 2-DOF parameter ${\alpha}$, a temporary value, we must induce most suitable parameter by complicate pole assignment and estimation of the ITAE performance index whenever ${\alpha}$ changes. In this paper, to solve this problem we suggest control algorithm to followed exactly value of ${\alpha}$ as 2-DOF parameter by using fuzzy algorithm . So, intelligence algorithm modeled by human knowledge, experience, teachability and judgment follow exact ${\alpha}$ value and it can compose the efficient 2-DOF PID controller to improve following performance, overshoot decrease.