• Proceedings of the KSME Conference
• /
• 2000.11b
• /
• pp.668-673
• /
• 2000

Spud angle( ${\alpha}$ ) and fuel injection angle ( ${\beta}$ ) have strong influence on spud type gas burner combustion. A wide range of flame stability is shown at ${\alpha}=60^{\circ}$, but at ${\alpha}=30^{\circ}$ is narrow. Optimum condition of flame stability swirl angle( ${\gamma}$ ) is $40^{\circ}$. At condition of ${\alpha}=30^{\circ}$ flame shape is relatively narrow and long, on the other hand, at ${\alpha}=60^{\circ}$ flame is wide and short. Regardless of spud angle, maximum flame temperature shows in the range of Z=200mm and R=0mm. Flame temperature, on the whole, is high at ${\alpha}=45^{\circ}$. At ${\alpha}=45^{\circ}$, NOx emission is higher than other conditions that may be concerned with flame temperature. At ${\beta}=60^{\circ}$ and ${\gamma}=40^{\circ}$, NOx emission is reduced due to fuel injection angle.

• Fisheries and Aquatic Sciences
• /
• v.9 no.1
• /
• pp.22-29
• /
• 2006

We determined the partial cDNA of Type II procollagen ${\alpha}1$[pro-${\alpha}1$(II)] chain (1802 bp) of the skate Raja kenojei, which codes 581 amino acid residues. The partial structure of the pro-${\alpha}1$(II) chain consisted of a part of triple helical region (309 residues) and a C-domain (272 residues). Comparing the chain to other vertebrates showed relatively low homology (about 50%) at the amino acid level. However, eight Cys residues in the C-domain of the skate pro-${\alpha}1$(II) chain were conserved in common with those of other vertebrates. The skate pro-${\alpha}1$ (II) chain mRNA was detected by RT-PCR of various tissues, but was undetected in tissues containing Type II collagen. The low homology and unexpected expression pattern suggest the presence of another mRNA variant of the skate pro-${\alpha}1$(II) chain. The present study is the first report of the primary structure of pro-${\alpha}1$(II) chain in an elasmobranch.

• Archives of Pharmacal Research
• /
• v.26 no.9
• /
• pp.731-734
• /
• 2003

Five known kaurane type diterpenoids, 16$\alpha$H, 17-isovaleryloxy-ent-kauran-19-oic acid (1), 16$\alpha$-hydroxy-17-isovaleryloxy-ent-kauran-19-oic acid (2), paniculoside-IV (3), 16$\alpha$-hydroxy-ent-kauran-19-oic acid (4), and ent-kaur-16-en-19-oic acid (5) were isolated from the root of Acanthopanax koreanum by repeated column chromatography and reversed phase preparative HPLC. The structures of these compounds were established from physicochemical and spectral data. Among the isolated compounds 16$\alpha$H, 17-isovaleryloxy-ent-kauran-19-oic acid (1) showed potent inhibitory activity ($IC_50$ value, 16.2 $\mu$ M) on TNF-$\alpha$ secretion from HMC-1, a trypsin-stimulated human leukemic mast cell line.

• Journal of the Chungcheong Mathematical Society
• /
• v.27 no.3
• /
• pp.439-454
• /
• 2014

We deal with the boundedness of the n-th derivatives of Bloch-type functions and Toeplitz operators and give a relationship between Bloch-type spaces and ranges of Toeplitz operators. Also we prove that the vanishing property of ${\parallel}uk^{\alpha}_z{\parallel}_{s,{\alpha}}$ on the boundary of $\mathbb{D}$ implies the compactness of Toeplitz operators and introduce a generalization of Bloch-type spaces.

• Food Science of Animal Resources
• /
• v.26 no.1
• /
• pp.136-143
• /
• 2006

We examined the macrophage activity of Codonopsis lanceolata and its effect on the growth of lactic starter culture when it was added to fermented milk. Nitric oxide(NO) and interleukin-1${\alpha}(IL-1{\alpha})$ were increased significantly(p<0.05) by addition of Codonopsis lanceolata water extract at $1,000\;{\mu}g/mL$. Tumer necrosis factor-${\alpha}(TNF-{\alpha})$ was increased significantly (p<0.05) by addition of Codonopsis lanceolata water extract or 70% ethanol extract at $1,000\;{\mu}g/mL$. Water extract of Codonopsis lanceolata showed higher macrophage activity than 70% ethanol extract. Growth of lactic starter culture was inhibited by the increased addition of Codonopsis lanceolata water extract, resulting in less decrease in pH. A stirred type or drink type fermentation process seemed mote suitable than a set type in proper production of Codonopsis lanceolata extract added fermented milk.

• Food Science of Animal Resources
• /
• v.27 no.4
• /
• pp.489-495
• /
• 2007

We examined the effect of Acanthopanax senticosus extract on macrophage activity and its effect on the growth of lactic starter culture when added to fermented milk. Greater amounts of Acanthopanax senticosus extract correlated with higher macrophage activity (p<0.05), in particular at $1,000\;{\mu}g/mL$. Water extract of Acanthopanax senticosus resulted in higher levels of nitric oxide (NO) than 70% ethanol extract at $1,000\;{\mu}g/mL$. In contrast, 70% ethanol extract resulted in higher $interleukin-1{\alpha}\;(IL-1{\alpha})$ and Tumor necrosis $factor-{\alpha}\;(TNF-{\alpha})$ levels than water extract. The growth of lactic starter culture was inhibited by increasing amounts of Acanthopanax senticosus water extract, resulting in a lower decrease in pH. A stirred type or drink type fermentation process seemed more suitable than a set type for the proper production of Acanthopanax senticosus extract added to fermented milk.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.12 no.1
• /
• pp.25-32
• /
• 2024

In this study, the mechanical properties of PHC pile concrete using alpha-type hemihydrate gypsum were evaluated. As the replacement ratio of alpha-type hemihydrate gypsum increased, the setting time rapidly accelerated. In particular, when replacement ratio exceeded 20 %, the setting time was shortened due to rapid hydration reaction, making it impossible to secure working time. As the replacement ratio of alpha-type hemihydrate gypsum increased, the ettringite and gypsum peaks tended to increase, and it is believed that the shrinkage of concrete decreased due to the increase in the ettringite peak. At a As the replacement ratio of 5 to 15 % for alpha-type hemihydrate gypsum, the compressive strength increased or was found to be equivalent to that of OPC. But at 20 % substitution, workability deteriorated due to rapid setting, so use of the 5 to 15 % range is considered appropriate.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1997.06a
• /
• pp.183-195
• /
• 1997

The micorstructural characteristics, particularly $\alpha$-halo formation, in semi-solid state processed hypereutectic Al-Si alloy was investigated. The microstructural changes during reheating of wedge type mold cast ingot, hot-rolled sheet, and Si particulate reinforced Al composite was compared with those occurred during stirring of semi-solid state hypereutectic alloy. In the case of semi-solid state reheating of wedge type ingot and hot-rolled sheet, fine particles of Si as well as $\alpha$-halo formed after heat treatment. Although there seemed to be no coarsening with variations of holding time, the region of $\alpha$-halo decreased due to homogenization. Nucleation and recrystallization was accelerated with the addition of alloying elements during hot rolling resulting in primary Si particle size decrease and $\alpha$-halo formation. In the case of extruded specimens, very little morphological change of reinforcing Si particles was observed. Almost no $\alpha$-halo formed during reheating because of the oxide film formed on the reinforcing Si particles which acted as a diffusion barrier between the matrix and the primary Si particles.

• Journal of Environmental Health Sciences
• /
• v.21 no.4
• /
• pp.24-31
• /
• 1995

Gas sensing element, $\alpha-Fe_2O_3$ was synthesized by dehydration, reduction, and oxidation of $\alpha-FeOOH$, which was synthesized with $FeSO_4\cdot 7H_2O$ and NaOH. They were produced as a bulk-type, a thick film-type. Then, their responses and mechanisms of response to the gas of carbon monoxide were studied. The qualities of gas sefising elements are decided by the structure and the relative surface area. In the process of $\alpha-FeOOH$ synthesis, the effects of reaction conditions as the equivalent ratio, on the structure and the relative surface area of gas sensing element were observed. The changes of the structure were measured with XRD, SEM,TG-DTA and BET. The resistance changes of the synthesized gas sensor in the air were measured. The response ratio were also measured for the changes of working temperature and gas concentration. As a result of analysis with XRD, it was confirmed that the the best conditions for the synthesis of $\alpha-FeOOH$ were equivalent ratio 0.65. The thick film-type element of $\gamma-Fe_2O_3$ responded more quickly than the bulk-type did. The structure and the relative surface area of the $\rho-FeOOH$ were confirmed as the important factors deciding gas response charcteristics.

• Journal of Technologic Dentistry
• /
• v.25 no.1
• /
• pp.89-94
• /
• 2003

The use of titanium alloys as biomaterials is increasing due to their superior biocompatibility and enhanced corrosion resistance compared to conventional stainless steels and cobalt-based alloys. Ti-6Al-4V ($\alpha+\beta$type) alloy instead of pure titanium ($\alpha$type) is being widely used as biomaterials has some characteristics such as high fatigue strength, tensile strength and corrosion resistance. It also has similar characteristics to Ti in inducing bony ingrowth. But it has been reported recently that the vanadium element expresses cytotoxicity and carcinogenicity and the aluminium element is related with dementia of Alzheimer type and neurotoxicity. In order to overcome their detrimental effects, $\beta$-phase stabilizer Nb was chosen in the present study. CP-Ti(ASTM grade 2), Ti-3wt.%Nb($\alpha$type), Ti-20wt.%Nb ($\alpha+\beta$type) and Ti-40 wt.%Nb($\beta$type) alloys were melted by vacuum arc furnace. Biocompatibility of Ti-Nb alloys was evaluated by cytotoxicity test. The results can be summarized as follows: 1. For the cytotoxicity test, Ti-Nb alloys showed excellent biocompatibility compared to CP-Ti(ASTM grade 2), 316L STS and Co-Cr alloys.