• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 세계 도시지반공학 심포지엄
• /
• pp.815-826
• /
• 2009

The paper presents a case study addressing the design and construction aspects for DCM(Deep Cement Mixing) method employed as the foundation of a caisson type breakwater with heavy weight(10,700 ton/EA) and a high design wave height($H_{1/3}$=8.7m). The DCM was designed for the project(Ulsan New Port North Breakwater Phase 1) by optimizing the pattern of DCM columns with a combination of short and long columns (i.e., block type(upper 3m)+wall type(lower)) and considering overlapped section between columns as a critical section against shear force where the coefficient of effective width of treated column($\alpha$) was estimated with caution. It was shown that the value can be 0.9 under the condition with the overlapped width of 30cm. In addition to that, a field trial test was performed after improving conventional DCM equipment (e.g., mixing blades, cement paste supplying pipes, multi auger motor, etc.) to establish a standardized DCM construction cycle (withdrawal rate of mixing blades) which can provide the prescribed strength. The result of the field strength test for cored DCM specimens shows that the averaged strength is larger than the target strength and the distribution of the strength(with a defect rate of 7%) also satisfies with the quality control normal distribution curve which allows defect rate of 15.9%.

• Korean Chemical Engineering Research
• /
• 제46권5호
• /
• pp.868-874
• /
• 2008

실리카, 알루미늄 실리케이트, 감마 알루미나 담체에 $Ni(NO_3)_2{\cdot}6H_2O$와 $Ni(CH_3COO)_2{\cdot}4H_2O$를 원료로 침전제인 요소와 시트르산을 사용하여 $90^{\circ}C$에서 공침법을 사용하여 흡착제를 제조하였으며 이를 환원시켜 일산화탄소 제거 실험을 수행하였다. 흡착제는 EDS, TPR, XRD 분석을 실시하여 이를 근거로 흡착제의 성능을 해석하였다. 침전제의 종류, 니켈 금속의 담지량, 담체, 니켈 금속의 염, 수소 환원 조건을 변화시켜 최적의 흡착 성능을 보이는 흡착제를 사용하여 실험을 수행하였다. 침전제인 요소에 $Ni(NO_3)_2{\cdot}6H_2O$를 사용하여 실리카 담체에 니켈 54.8 wt%를 담지하여 제조한 흡착제를 $500^{\circ}C$에서 3시간 수소 환원 전처리 후 흡착 실험을 하였을 때 가장 효과적으로 일산화탄소를 제거함을 확인하였다.

• 생물정신의학
• /
• 제16권2호
• /
• pp.112-120
• /
• 2009

Objectives : Depression is a common psychiatric disorder in cancer patients. The Brief Edinburgh Depression Scale(BEDS), which is an abbreviated version of the Edinburgh Depression Scale, may serve as a useful tool in screening for the depression in patients with the medical illnesses. This report investigated the reliability and validity of the Korean Version of the BEDS(K-BEDS) for the depression in cancer patients. Methods : One-hundred cancer patients were enrolled in this study. All subjects completed the K-BEDS, the Hospital Anxiety Depression Scale(HADS), and the Karnofsky Performance Status Scale(KPSS). Reliability, validity and Receiver Operating Characteristic(ROC) curve analysis measures were assessed. Results : The K-BEDS showed good internal consistency(Cronbach ${\alpha}$=0.77) and test-retest reliability(0.94, p<0.001). All item-total correlations were above 0.3. Also, it revealed moderate correlation with the depression subscale of the HADS(r=0.617), but no correlation with the KPSS. Exploratory factor analysis produced only one factor, accounting for 47.1% of the total variance. The most valid cutoff value to screen for depression was a total score of 5 on the K-BEDS, which showed sensitivity of 62.5% and specificity of 86.4% with a positive predictive value of 4.60 and a negative predictive value of 0.43.

• 마이크로전자및패키징학회지
• /
• 제26권4호
• /
• pp.113-118
• /
• 2019

In this study, we investigated the growth of single-crystallinity α-Ga₂O₃ thin films on c-plane sapphire substrates using halide vapor pressure epitaxy. We also found the optimal growth conditions to suppress the phase transition of α-Ga₂O₃. Our results confirmed that the growth temperature and partial pressure of the reactive gas greatly influenced the crystallinity. The optimal growth temperature range was about 460~510℃, and the α-Ga₂O₃ thin films with the highest crystallinity were obtained at a III/VI ratio of 4. The thickness and surface morphology of the thin films was observed by scanning electron microscopy. The film thickness was 6.938 ㎛, and the full width at half maximum of the ω-2θ scan rocking curve was as small as 178 arcsec. The optical band gap energy obtained was 5.21 eV, and the films were almost completely transparent in the near-ultraviolet and visible regions. The etch pit density was found to be as low as about 6.0 × 10⁴ cm^-2.

• 품질경영학회지
• /
• 제44권1호
• /
• pp.167-180
• /
• 2016

Purpose: The problem for the traditional control chart is that it is unable to monitor the very small fraction of nonconforming and the underlying distribution is the normal distribution. $Z_p$ control chart is useful where it controls the vert small fraction on nonconforming. In this study, we will design the $Z_p$ control chart in order to use under non-normal process. Methods: $Z_p$ is calculated not by failure rate based on attribute data but using variable data. Control limit for non-normal $Z_p$ control chart is designed based on ${\alpha}$-risk calculated by cumulative distribution function of Burr distribution. ${\beta}$-risk, which is for performance evaluation, obtains in the Burr distribution's cumulative distribution function and control limit. Results: The control limit for non-normal $Z_p$ control chart is designed based on Burr distribution. The sensitivity can be checked through ARL table and OC curve. Conclusion: Non-normal $Z_p$ control chart is able to control not only the very small fraction of nonconforming, but it is also useful when $Z_p$ distribution is non-normal distribution.

• Biomolecules & Therapeutics
• /
• 제7권1호
• /
• pp.59-65
• /
• 1999

A bioequivalence study of the Dong Wha Cisapril tablets(Dong Wha Pharm. Ind. Co., Ltd.) to the Prepulsid tablets(Janssen Korea Ltd.), formulations of cisapride, was conducted. Twenty four healthy Korean male subjects received each formulation at the dose of 5 mg as cisapride in a 2$\times$2 crossover study. There was a 1-week washout period between the doses. Plasma concentrations of cisapride were monitored by an LC/MS method for over a period of 36 h after each administration. AUC(area under the plasma concentration- time curve from time zero to infinity) was calculated by the linear trapezoidal and extrapolation method. $C_{max}$ (maximum plasma drug concentration) and $T_{max}$ (time to reach $C_{max}$) were compiled from the plasma drug concentration-time data. Analysis of variance (ANOVA) revealed that there are no differences in AUC, $C_{max}$ and $T_{max}$ between the formulations. The apparent differences between the formulations in these parameters were all far less than 20% (i.e., 6.8, -6.6 and 1.8% for AUC, $C_{max}$ and $T_{max}$, respectively). Minimum detectable differences(%) at $\alpha$=0.05 and 1-$\beta$=0.8 were all less than 20% in these parameters between the formulations (i.e., 16.5, 11.4 and 16.4% for AUC, $C_{max}$ and $T_{max}$, respectively). The 90% confidence intervals for these parameters were also within 20% (i.e., -2.9~ 16.4, -13.2~0.1 and -7.8~ 11.4% for AUC, $C_{max}$ and $T_{max}$, respectively). These results satisfy the bioequivalence criteria of the Korea Food and Drug Administration (KFDA) guidelines (No. 98-51). Therefore, these results indicate that the two formulations of cisapride are bioequivalent and, thus, may be prescribed interchangeably.hangeably.y.hangeably.

• Asian-Australasian Journal of Animal Sciences
• /
• 제32권11호
• /
• pp.1789-1800
• /
• 2019

Objective: Although alveolar macrophages play a key role in the respiratory immunity of livestock, studies on the mechanism of differentiation and survival of alveolar macrophages are lacking. Therefore, we undertook to investigate changes in the lipid metabolism and survival rate, using 3D4/31 macrophages and Dudleya brittonii which has been used as a traditional asthma treatment. Methods: 3D4/31 macrophages were used as the in vitro porcine alveolar macrophages model. The cells were activated by exposure to phorbol 12-myristate 13-acetate (PMA). Dudleya brittonii extraction was performed with distilled water. For evaluating the cell survival rate, we performed the water-soluble tetrazolium salt cell viability assay and growth curve analysis. To confirm cell death, cell cycle and intracellular reactive oxygen species (ROS) levels were measured using flow cytometric analysis by applying fluorescence dye dichlorofluorescein diacetate and propidium iodide. Furthermore, we also evaluated cellular lipid accumulation with oil red O staining, and fatty acid synthesis related genes expression levels using quantitative polymerase chain reaction (qPCR) with SYBR green dye. Glycolysis, fatty acid oxidation, and tricarboxylic acid (TCA) cycle related gene expression levels were measured using qPCR after exposure to Dudleya brittonii extract (DB) for 12 h. Results: The ROS production and cell death were induced by PMA treatment, and exposure to DB reduced the PMA induced downregulation of cell survival. The PMA and DB treatments upregulated the lipid accumulation, with corresponding increase in the acetyl-CoA carboxylase alpha, fatty acid synthase mRNA expressions. DB-PMA co-treatment reduced the glycolysis genes expression, but increased the expressions of fatty acid oxidation and TCA cycle genes. Conclusion: This study provides new insights and directions for further research relating to the immunity of porcine respiratory system, by employing a model based on alveolar macrophages and natural materials.

• Pediatric Gastroenterology, Hepatology & Nutrition
• /
• 제25권5호
• /
• pp.396-405
• /
• 2022

Purpose: This study evaluated the predictive role of fecal calprotectin (FC) measured at an early stage of treatment for monitoring clinical remission (CR) after six months and endoscopic remission (ER) after one year of treatment in pediatric Crohn's disease (CD). Methods: This retrospective study included 45 patients who simultaneously underwent ileocolonoscopy and FC testing during follow-up. FC levels were measured before and after six weeks of treatment. CR was assessed after six months of treatment using Pediatric Crohn' s Disease Activity Index and acute-phase reactants. ER was assessed after one year using the Simple Endoscopic Score for Crohn's Disease. Results: Twenty-nine (64.4%) patients used oral prednisolone for remission induction and 16 (35.6%) patients used anti-tumor necrosis factor-alpha. Thirty (66.7%) patients achieved CR, while 24 (53.3%) achieved ER. The FC level measured after six weeks of treatment could predict CR (χ²=9.15, p=0.0025) and ER (χ²=12.31, p=0.0004). The δFC could predict CR (χ²=7.91, p=0.0049), but not ER (χ²=1.85, p=0.1738). With a threshold of ≤950.4 ㎍/g, FC at week six could predict CR with 76.7% sensitivity and 73.3% specificity. The area under the curve (AUC) was 0.769 (standard error 0.0773, p=0.0005). The same threshold predicted ER with 87.5% sensitivity and 71.4% specificity. The AUC was 0.774 (standard error 0.074, p=0.0002). Conclusion: FC assay at an early stage of treatment can be used as a surrogate marker to predict CR and mucosal healing in pediatric CD.

• Imaging Science in Dentistry
• /
• 제53권4호
• /
• pp.375-381
• /
• 2023

Purpose: This study assessed the diagnostic performance of stitched and non-stitched cross-sectional cone-beam computed tomography (CBCT) images of non-displaced ovine mandibular fractures. Materials and Methods: In this ex vivo study, non-displaced fractures were artificially created in 10 ovine mandibles (20 hemi-mandibles) using a hammer. The control group comprised 8 hemi-mandibles. The non-displaced fracture lines were oblique or vertical, <0.5 mm wide, 10-20 mm long, and only in the buccal or lingual cortex. Fracture lines in the ramus and posterior mandible were created to be at the interface or borders of the 2 stitched images. CBCT images were obtained from the specimens with an 80 mm×80 mm field of view before and after fracture induction. OnDemand software (Cybermed, Seoul, Korea) was used for stitching the CBCT images. Four observers evaluated 56 (28 stitched and 28 non-stitched) images to detect fracture lines. The diagnostic performance of stitched and non-stitched images was assessed by calculating the area under the receiver operating characteristic curve (AUC). Sensitivity and specificity values were also calculated (alpha=0.05). Results: The AUC was calculated to be 0.862 and 0.825 for the stitched and non-stitched images, respectively (P=0.747). The sensitivity and specificity were 90% and 75% for the non-stitched images and 85% and 87% for the stitched images, respectively. The inter-observer reliability was shown by a Fleiss kappa coefficient of 0.79, indicating good agreement. Conclusion: No significant difference was found in the diagnostic performance of stitched and non-stitched cross-sectional CBCT images of non-displaced fractures of the ovine mandible.

• 대한교통학회지
• /
• 제23권7호
• /
• pp.159-163
• /
• 2005

도로를 건설하는 궁극적인 목적은 운전자의 편의성을 고려해야 함에도 불구하고 지금까지의 도로선형설계시 도로 이용자인 운전자를 고려하지 않고 있는 실정이다. 운전자의 편의성은 시간적 측면에서 정시성 및 신속성을 고려하고 있지만, 더불어 부가적으로 고려되어야 할 요소로서 사고에 대한 안전성을 감안해야만 한다. 본 연구에서는 지방부 일반국도 4차선 단곡선부의 1차로를 대상으로 입체선형의 주행속도특성을 고려한 편경사 안전율을 산정하고자 한다. 첫째, 기하구조의 영향을 분석하기 위해 선행차에 의해 영향을 받지 않은 승용차의 주행속도를 조사하였다. 둘째, 종단선형의 영향과 평면선형의 영향을 조합하여 6개 구간, 즉 12개 지점에서 주행속도를 측정하여 주행속도 특성을 기초 통계 분석하였다. 섯째, 기초 통계 분석 결과를 바탕으로 최대편경사를 새로운 안전율(${\alpha}$)개념을 도입하여 주행속도를 고려한 편경사값을 산정하였다. 연구결과, 입체선형에서 승용차의 주행특성을 알 수 있었고, 이를 고려한 안전율을 제시할 수 있었다. 최대편경사를 산정함에 있어 본 연구의 결과인 3차원적 입체선형을 고려한 안전율을 적용한다면 도로설계시 운전자의 안전성을 향상시킬 수 있을 것으로 판단된다. 더불어, 본 연구의 범위를 확장하여 다양한 기하구조를 가진 도로구간에 대한 수집 분석한 후, 3차원적 입체선형을 고려한 모델이 개발되어야 할 것으로 판단된다.