• Journal of the Chungcheong Mathematical Society
• /
• v.20 no.4
• /
• pp.543-550
• /
• 2007

In this paper, we define the ap-Denjoy integral and investigate some properties od the ap-Denjoy integral. In particular, we show that a function f : [a,b]${\rightarrow}\mathbb{R}$ is ap-Denjoy integrable on [a,b] if and only if there exists an $ACG_s$ function F on [a,b] such that $F^{\prime}_{ap}=f$ almost everywhere on [a,b].

• The Korean Journal of Mycology
• /
• v.46 no.4
• /
• pp.491-494
• /
• 2018

A new species of Graphis is described from Cameroon, Africa. The new taxon is distinguished by a greyish-green, glossy, uneven, and continuous thallus. Further, it possesses stellately branched lirellae, and its entire labia are covered almost completely with thick thalline margin. It also has a completely carbonized proper exciple, which is considerably thick at the base, one-spored asci, and muriform hyaline to yellowish ascospores.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.5 no.4
• /
• pp.379-384
• /
• 2010

The service quality is one of the most important issue for successful deployment of IPTV services. Currently, a number of parameters have been reported that they have an effect on the quality of IPTV services. However, it is almost impossible to monitor and manage all the parameters in real time. Key parameters, therefore, should be chosen as a service metric for efficient quality management of IPTV services. For this purpose, we implement an environment for monitoring and measuring the quality of IPTV services and try to figure out the effect of each parameter on the quality of IPTV services. In particular, we focus on a parameter called continuous count error (CCE) measured at the level of MPEG transport stream (TS) and show that it has a greater effect on the quality of IPTV services than other parameters.

• Journal of Microbiology and Biotechnology
• /
• v.15 no.3
• /
• pp.461-465
• /
• 2005

Characteristics of biological $CO_2$ fixation by Chlorella sp. HA-1 were investigated in a semi-continuous and series reactor system using an internally illuminated photobioreactor to overcome shortcomings of physicochemical technologies such as adsorption and membrane separation. High $CO_2$ fixation rate was achieved in the semi-continuous reactor system, in which the dilution ratios of the culture medium were controlled. The average $CO_2$ fixation rate was maintained almost constantly when the dilution ratio increased by 0.1 increment from the initial value of 0.5. The total removal efficiency of $CO_2$ was enhanced by employing a series reactor system. The average $CO_2$ fixation rate increased until 4.013 g $CO_2\;day^{-1}$ in a series operation of four reactors, compared to 0.986 g $CO_2\;day^{-1}$ in a batch operation mode. The total $CO_2$ fixation rate was proportional to the number of reactors used in the series reactor system. In the series reactor system of semi-continuous operation, a large amount of $CO_2$ was removed continuously for 30 days. These results showed that the present reactor systems are efficient and economically feasible for a biological $CO_2$ fixation.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.15 no.1
• /
• pp.291-298
• /
• 1995

An ultrasonic testing uses the directivity of the ultrasonic wave which propagates in one direction. The directivity is expressed as the relationship between the propagate direction and its sound pressure. This paper studied the directivity of shear waves emitted from angle probes and scattered from surface defects by using visualization method. These experimental results were compared with the theory which was based on the continuous wave. The applicability of continuous wave theory was discussed in terms of the parameter $d/{\lambda}$; where d is transducer or defect size and ${\lambda}$ is the wavelength. In the case of angle probes, the experimental results show good agreement with theoretical directivity on the principal lobe. When defect size was smaller than the wavelengths, clear directivity in the reflected wave was observed. In the case of the same ratio of defect size to wavelength, the directivity of reflected waves from the defect show almost the same directivity in spite of frequency differences. When the $d/{\lambda}$ is greater than 1.5, measured directivities almost agreed with the theoretical one.

• Journal of Environmental Health Sciences
• /
• v.21 no.4
• /
• pp.10-16
• /
• 1995

Dyes are released into the environment from industrial wasterwater. They are considered to be a pollution problem because of the wide spread into environment with a variety of colors. In order to biological treatment of industrial dyes waste water, biodegradation of reactive dyes such as Rifacion Red H-3EB, Rifazol Blue BT, Rifacion Yellow P-4G and Rifacion Brown RT were carried out decolorized by Aspergillus sojae B-10. Aspergillus sojae B-10 showed the almost completely biodegradation ability when it was cultivated in a 2.0% glucose, 0.06% sodium nitrite, 0.1% $KH_2PO_4$, 0.5% $MgSO_4\cdot 7H_2O$ containing each reactive dyes (500 ppm) under the optimal conditions of 32$\circ$C and pH 5. The mycelium of Aspergillus sojae B-10 was produced extracellular enzyme which has concerned responsible for dyes biodegradation. Under optimal conditions, reactive dyes started being decolorized within 24 hr and its was almost decolorized c ompletely after 5 days incubation. Rifazol blue RT was not completely decolorized until 5 days of cultivation. Rafacion Red BT, Rifasol blue BT and Rifacion yellow P-4G were completely decolorized after 5 days cultivation.

• Journal of Environmental Science International
• /
• v.23 no.1
• /
• pp.61-68
• /
• 2014

This study attempted to utilize various groundcover plants in phytoremediation, using shade plants, which often have a high shade tolerance for shade urban space. Liriope platyphylla was grown in soil containing three of heavy metals, Zn, Cd, and Pb under four different concentrations (0, 100, 250 and 500 mg/kg) to determine the heavy metal accumulation characteristics and removing from soil. Total amounts of accumulated Zn in L. platyphylla were increased in accordance with increasing elevated Zn concentrations in soil, but the difference was not significant between Zn250 and Zn500. Cd accumulation, sharply increased in Cd100 and Cd250, but was reduced in Cd500. Increased Pb concentration in soil resulted a continuous increase in the total amounts of Pb accumulated in L. platyphylla. The total content of Zn in soil decreased by almost 50% in Zn100, almost 33% in Zn250 and 20% in Zn500 through growth of L. platyphylla over a period of 7 months. In the case of Cd, the concentration in soil, was decreased with 10% in Cd100, 10% in Cd250 and 33% in Cd500 through growth of L. platyphylla over a period of 7 months. This results indicate that more Cd was removed by planting L. platyphylla, compared to Zn or Pb.

• Advances in environmental research
• /
• v.4 no.2
• /
• pp.105-117
• /
• 2015

The groundwater is a very important part of the environment and must be protected for the benefit of the present and future generation. The contamination of soil and groundwater by chemicals has become an increasing concern in the recent past. These chemicals enter the groundwater system by a wide variety of mechanisms, including accidental spills, land disposal of domestic and industrial wastes and application of agricultural fertilizers. Once introduced into an aquifer, these contaminants will be transported by flowing groundwater and may degrade water quality at nearby wells and streams. For improving the management and protection of groundwater resources, it is important to first understand the various processes that control the transport of contaminants in groundwater. Predictions of the fate of groundwater contaminants can be made to assess the effect of these chemicals on local water resources and to evaluate the effectiveness of remedial actions. In this study, an attempt has been made to investigate the behaviour of solute transport through porous media using laboratory experiments. Sodium chloride was used as a conservative chemical in the experiment. During the experiment, pulse boundary condition and continuous boundary conditions were used. Experimental results have been presented for conservative solute transport in the sand. The pattern of the break through curve remains almost same in all the cases of varying flow rate and initial concentration of conservative chemical.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.834-837
• /
• 2005

In this paper, we describe the method of non-invasive blood pressure measurement using pulse wave transit time(PWTT). PWTT is a new parameter involved with a vascular that can indicate the change of BP. PWTT is measured by continuous monitoring of ECG and pulse wave. No additional sensors or modules are required. In many cases, the change of PWTT correlates with the change of BP. We measure pulse wave using the photo plethysmograph(PPG) sensor in an earlobe and we measure ECG using the ECG monitoring device our made in the chest. The measurement device for detecting pulse wave consists of infrared LED for transmitted light illumination, pin photodiode as light detector, amplifier and filter. We composed 0.5Hz high pass, 60Hz notch and 10Hz low pass filter. ECG measurement device consists of multiplexer, amplifier, filter, micro-controller and RF module. After amplification and filtering, ECG signal and pulse wave is fed through micro-controller. We performed the initial work towards the development of ambulatory BP monitoring system using PWTT. An earlobe is suitable place to measure PPG signal without the restraint in daily work. From the results, we can know that the dependence of PWTT on BP is almost linear and it is possible to monitoring an individual BP continuously after the individual calibration.

• Journal of Ecology and Environment
• /
• v.31 no.1
• /
• pp.9-15
• /
• 2008

Growth and reproduction of Palaemon serrifer were described and analyzed in a population inhabiting tide pools in warm temperate waters in Korea. The water temperature varied greatly in the tide pools, ranging from 8$^{\circ}C$ to 27.8$^{\circ}C$ Population structure and growth were investigated using size frequency distribution data collected from January to December 2003. Sex ratios fluctuated, but were almost equal during the breeding period. Growth was continuous and size increased gradually throughout the year. Adult females were larger and grew faster than males. von Bertalanffy growth parameters for a one-year sample of females and males were estimated as $L_{i\ddot{A}}$ = 11.32, K = 0.311, $t_0$ = -0.4115 and $L_{i\ddot{A}}$ = 8.36, K = 0.228, $t_0$ = -0.9693 respectively. Breeding was seasonal, starting in May, peaking in August, and finishing by the end of August. The species showed continuous production of successive broods. Laboratory observation showed that females with embryos near hatching had ovaries filled with vitellogenic oocytes ready for spawning. The reproductive output (effort) of each female (mean number of eggs: $552{\sim}1355$) was not high. The mean embryo volume, $0.078mm^3$, is relatively small, indicative of low energy allocation to each embryo. Recruitment of juveniles was closely linked to the breeding period, beginning in September.