• Journal of Korean Tunnelling and Underground Space Association
• /
• v.14 no.6
• /
• pp.637-652
• /
• 2012

The protector with the shape of '${\sqcap}$' in cross section can be set up in the tunnel, which can be constructed for enlargement of cross section, to keep traffic flow in the tunnel. It is impossible to install the rockbolt in the side wall of tunnel due to a limited space between the protector and cutting surface of side wall. The objective of this study is to suggest the optimum thickness of shotcrete lining without rockbolt on the side wall and to evaluate the stability of tunnel enlarged. Numerical analysis was performed to evaluate the displacement at the center of tunnel, the convergence of tunnel, and the stress in shotcrete lining in 4-lane NATM road tunnel enlarged from 3-lane NATM road tunnel. The vertical displacement at the center of tunnel and the convergence of crown in the tunnel with rockbolt in the side wall were almost similar to those in the tunnel without rockbolt in the side wall. The convergence of bench/invert and the stress in shotcrete lining without rockbolt on the side wall were greater maximum 0.57 mm and 1,300 kN/$m^2$ than those with rockbolt in the side wall. The increased convergence and the stress in shotcrete lining can be reduced in incerasing of thickness of shotcrete lining about 20% (5 cm) of standard thickness, 25 cm, of shotcrete lining.

• Microbiology and Biotechnology Letters
• /
• v.16 no.4
• /
• pp.310-315
• /
• 1988

Two isoenzymes of chorismate mutase(E.C.5.4.99.5) designated as chorismate mutase I(CM I) and chorismate mutase II(CM II), were detected and partially purified from a sp. of intrasporangium isolated from soil. CM I and CM II had pH optima of pH 6.5 and 8.0, respectively and showed the same temperature optimum of 45$^{\circ}C$. The activation energy of the enzymatic reaction was estimated to be 14.7kcal/ mole with CM I and 10.8kcal/mole with CM II. The affinity of isoenzyme CM I for substrate(Km= 1.35mM) was almost the same level as that of CM II(Km = 1.22mM). Both isoenzymes were stable at pH values ranged from pH 6.5 to 9.0, but rapidly denaturated at temperatures above 45$^{\circ}C$. CM II was activated about 7$^{\circ}C$ of its activity by $Ba^{++}$ or $Mg^{++}$ while CM I was slightly inhibited by the same metal ions. Thiol compounds were found not to be necessary for stability of the two enzymes but Co$^{++}$ and EDTA had a little stabilizing effect on CM II only. p-Chloromercuribenzoate strongly inactivated the activities of both enzymes but the reducing agents such as dithiothreitol and L-cysteine protected them against the pCMB inhibition.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.362-362
• /
• 2014

Atomic layer deposition (ALD) can be regarded as a special variation of the chemical vapor deposition method for reducing film thickness. ALD is based on sequential self-limiting reactions from the gas phase to produce thin films and over-layers in the nanometer scale with perfect conformality and process controllability. These characteristics make ALD an important film deposition technique for nanoelectronics. Tantalum pentoxide ($Ta_2O_5$) has a number of applications in optics and electronics due to its superior properties, such as thermal and chemical stability, high refractive index (>2.0), low absorption in near-UV to IR regions, and high-k. In particular, the dielectric constant of amorphous $Ta_2O_5$ is typically close to 25. Accordingly, $Ta_2O_5$ has been extensively studied in various electronics such as metal oxide semiconductor field-effect transistors (FET), organic FET, dynamic random access memories (RAM), resistance RAM, etc. In this experiment, the variations of chemical and interfacial state during the growth of $Ta_2O_5$ films on the Si substrate by ALD was investigated using in-situ synchrotron radiation photoemission spectroscopy. A newly synthesized liquid precursor $Ta(N^tBu)(dmamp)_2$ Me was used as the metal precursor, with Ar as a purging gas and $H_2O$ as the oxidant source. The core-level spectra of Si 2p, Ta 4f, and O 1s revealed that Ta suboxide and Si dioxide were formed at the initial stages of $Ta_2O_5$ growth. However, the Ta suboxide states almost disappeared as the ALD cycles progressed. Consequently, the $Ta^{5+}$ state, which corresponds with the stoichiometric $Ta_2O_5$, only appeared after 4.0 cycles. Additionally, tantalum silicide was not detected at the interfacial states between $Ta_2O_5$ and Si. The measured valence band offset value between $Ta_2O_5$ and the Si substrate was 3.08 eV after 2.5 cycles.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.8
• /
• pp.456-464
• /
• 2016

Increasing the strength of structural materials allows their self-weight to be reduced and this, in turn, enables the structures to satisfy esthetic requirements. The yield strength of high-performance steel is almost 480 MPa, which is approximately 50% higher than that of general structural steel. The use of high strength materials, however, makes the sections more slender, which can potentially result in significant local stability problems. The strength of slender element sections might be governed by their elastic buckling behavior, and the elastic buckling strength is very sensitive to the boundary conditions. Because the web provides the boundary conditions of the compressive thin-flange, the stiffness of the web can affect the elastic buckling strength of the flange. In this study, therefore, the effects of the flange and web slenderness ratios on the elastic flange local buckling of I-girders subjected to a pure bending moment were evaluated by finite element analysis (FEA). The analysis results show that the elastic local buckling strength and buckling modes were affected not only by the web support conditions, but also by the flange and web slenderness ratios.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.19 no.1
• /
• pp.20-26
• /
• 1986

Very little information is available in the literature on storage of fish sauce. Therefore, microbiological and chemical chracteristics during storage and quality of fish sauce were investigated and discussed to present data about the optimum storage condition. The chopped sardine meat was mixed with equal amount of water and $9\%$(w/w) of $75\%$ vital wheat gluten and then hydrolyzed by addition of commercial proteolytic enzymes such as bromelain, papaya protease, ficin and a enzyme mixture (Pacific Chem. Co.) for 4 hours at $52.5^{\circ}C$. The reaction mixture was heated for 30 min at $100^{\circ}C$ for enzyme inactivation, pasteurization and color development and then centrifuged for 20 min at 4,000 rpm. Table salt and benzoic acid were added for bacteriostatic effect and stored for 80 days at $15{\pm}1^{\circ}C$ and $30{\pm}1^{\circ}C$. The results were summarized as follows: 1. The amount of amino-nitrogen and pH of fish sauce were almost unchanged during storage. 2. Mininum concentration of salt for bacteriostatic activity was $9\%$(w/w) regardless of addition of benzoic acid. 3. the yields of amino-nitrogen were $63.1\%$ for the hydrolysate prepared without enzyme, $79.7\%$ for that with bromelain, $69.9\%$ with ficin, $74.3\%$ with papaya pretense, and $78.1\%$ with enzyme mixture, respectively. 4. The contents of amino-nitrogen were $4510.0mg\%$ on the dry basis for the product prepared by autolysis, $5483.2mg\%$ for that prepared with bromelain, $5305.7mg\%$ with ficin, $4994.1mg\%$ with papaya protease and $5582.3mg\%$ with the enzyme mixture, respectively. 5. The contents of crude protein were $51.35\%$ on the dry basis for the product prepared by autolysis and 55 to $59\%$ for prepared with commercial enzymes. 6. The hydrolysate prepared with the enzyme mixture revealed a little stronger meaty taste than any other products. 7. The level of crude protein in residues was still high ($69.5{\sim}77.2\%$ on the dry basis) and might be originated from the added vital wheat gluten.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1998.02a
• /
• pp.120-120
• /
• 1998

Boron nitride (BN) films have attracted a growing interest for a variety of t technological applications due to their excellent characteristics, namely hardness, c chemical inertness, and dielectrical behavior, etc. There are two crystalline phases 1551; of BN that are analogous to phases of carbon. Hexagonal boron nitride (h-BN) has a a layered s$\sigma$ucture which is spz-bonded structure similar to that of graphite, and is t the stable ordered phase at ambient conditions. Cubic boron nitride (c-BN) has a z zinc blende structure with sp3-bonding like as diamond, 따ld is the metastable phase a at ambient conditions. Among of their prototypes, especially 삼Ie c-BN is an i interesting material because it has almost the same hardness and thermal c conductivity as di없nond. C Conventionally, significant progress has been made in the experimental t techniques for synthesizing BN films using various of the physical vapor deposition 밍ld chemical vapor deposition. But, the major disadvantage of c-BN films is that t they are much more difficult to synthesize than h-BN films due to its narrow s stability phase region, high compression stress, and problem of nitrogen source c control. Recent studies of the metalorganic chemical vapor deposition (MOCVD) of I III - V compound have established that a molecular level understanding of the d deposition process is mandatory in controlling the selectivity parameters. This led t to the concept of using a single source organometallic precursor, having the c constituent elements in stoichiometric ratio, for MOCVD growth of 삼Ie required b binary compound. I In this study, therefore, we have been carried out the growth of h-BN thin f films on silicon substrates using a single source precursors. Polycrystalline h-BN t thin films were deposited on silicon in the temperature range of $\alpha$)() - 900 $^{\circ}$C from t the organometallic precursors of Boron-Triethylamine complex, (CZHs)3N:BRJ, and T Tris(dimethylamino)Borane, [CH3}zNhB, by supersonic molecular jet and remote p plasma assisted MOCVD. Hydrogen was used as carrier gas, and additional nitrogen w was supplied by either aDlIDonia through a nozzle, or nitrogen via a remote plasma. T The as-grown films were characterized by Fourier transform infrared spectroscopy, x x-ray pthotoelectron spectroscopy, Auger electron spectroscopy, x-ray diffraction, t transmission electron diffraction, optical transmission, and atomic force microscopy.roscopy.

• Land and Housing Review
• /
• v.7 no.2
• /
• pp.77-85
• /
• 2016

The government has switched the purpose of housing policy, from the 'housing supply' to 'housing welfare', with the Housing Laws established in 2015 under evaluation that resident stability and resident standard were improved. But, as 'affordable' housing is gradually decreasing, residential environment has become more poor. Residential environment is a basic element for the child safety, health, and better education. This study explored that the poor resident environment had effect on the child, figured out the situation on housing poverty of domestic child and searched the situation of the residential policy of domestic and foreign child. The main results are as follows. First, the poor resident environment of childhood has a bad effect on the physical health, mental health, academic achievement and cognitive development. Second, 1.29 million children (11.9%) are living in condition of housing poverty below minimum resident standard and are concentrated in certain areas. Third, the policy on housing poverty of domestic child is almost absent and focuses on the elderly, young people. this study discussed political and practical solutions based on these research results. On the basis of these research results, as policy suggestions we proposed housing policy making based on the UN Convention on the Rights of the Child, evidence-based housing policy enforcement and, residential policy suggestions under the responsibility of central government, and as practical suggestions community working as the subject and related agency's solidarity from prevention activity of housing poverty and child advocacy point and we discussed way for issue and analyzed related laws, policies, commitments.

• Journal of Animal Science and Technology
• /
• v.48 no.2
• /
• pp.307-314
• /
• 2006

To search direct fed microbials, we isolated a Candida sp. from kefir grain. The isolated Candida sp. strain showed 99.8% of identity to the species of Candida kefyr by API 20C kit. Enzyme activity of Candida kefyr was higher in amylase (0.33±1.12μmol/min/mg) than that in phytase (0.052±0.98μmol/ min/mg) cellulase(0.051±μmol/min/mg) and xylanase (0.011±0.98mol/min/mg). The maximum numbers of Candida kefyr in growth curve were reached at 30 h fermentation. Candida kefyr showed high resistances to acidic environment, which was not perfectly extincted even at pH 2.0. And it showed high tolerance to bile salt which had almost 97.2% of survival in the presence of 1.0% bile salt.Especially, Candida kefyr showed high heat stability which remained 10% of initial microorganisms at 60℃. Candida kefyr was not generally inhibited by most of 11 antibiotic agent which contained tetracycline groups. These results suggest that the isolated Candida kefyr has a useful properties as probiotics.

• Horticultural Science & Technology
• /
• v.35 no.1
• /
• pp.98-107
• /
• 2017

A DNA profile database was constructed to investigate the genetic relatedness of 72 germplasm samples of Pyrus and related cultivars using microsatellite markers. Three P. pyrifolia, four P. commus, and one P. betulifolia cultivars with different morphological traits were screened using 387 pairs of microsatellite primers. A core set of 11 primer pairs was selected to obtain 133 polymorphic amplified fragments meeting three criteria: high polymorphism information contents (PIC), high repeatability, and distinct allele patterns. The number of alleles per locus ranged between 4 and 22. Average PIC was 0.743 (range: 0.557 - 0.879). Cluster analysis using the unweighted pair - group method with arithmetical average (UPGMA) separated the 72 pear cultivars and germplasm samples into four major groups: Chinese, European pears, and a cluster of 55 Asian pears that could be reclassify into two subcluster, I - $1^{st}$ and II - $2^{nd}$, according to pedigree information. Almost all of the cultivars were discriminated by 11 microsatellite marker genotypes. The microsatellite DNA profile database may be utilized as tool to verify distinctness, uniformity, and stability between candidate cultivar, and to verify in the distinctness of existing cultivars.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.22 no.1
• /
• pp.208-215
• /
• 2018

The causes of column shrinkage and the codes that have been studied up to now are discussed. The documents mentioned in the code deal with the drying shrinkage, creep, compressive strength and elastic modulus of the specimen, and the elastic deformation calculated from the structural analysis. However, the deformation due to the temperature caused by the long term monitoring is less than that caused by the factors generated by the previous studies. In the previous studies, it was found that dehydration shrinkage, creep, and elastic deformation were not considered for temperature-induced deformation, while for the specimen experiments, the temperature-related items were replaced with the humidity-related terms The compensation value by the proposed equation showed error of 4.9 mm in the upper direction and 1.0mm in the lower direction when calculating column shortening, and it was found that its value by the proposed equation almost coincided with the measurement value in Site. Therefore, it is necessary to further study the temperature that can be omitted in calculating the existing column shortening, to consider the influence factors, and to supplement the criteria for the temperature measurement of the structure as well as the specimen tests.