• 대한지역사회영양학회지
• /
• 제7권4호
• /
• pp.578-584
• /
• 2002

This study was designed to investigate the association between the period of engraftment and the nutritional status of patient s undergoing bone marrow transplantation for acute myelogenous leukemia (AML). Nutritional status was evaluated by body mass index (BMI), percentage of ideal body weight (PIBW), percentage of weight loss, and serum albumin, total protein (T protein), hemoglobin (HGB) and hematocrit (HCT) levels on the day prior to transplantation and on the day of bone marrow transplantation. The periods of engraftment were determined by absolute neutrophil counts (ANC) above $500/mm^3$ from the day of bone marrow transplantation. The study subjects were 80 patients (55 males, 25 females) with acute myelogenous leukemia admitted to the University Hospital in Seoul. The result of this study is as follows : Tie nutritional status values of the majority of patients on the day prior to transplantation were in the normal range except for HGB and HCT ; however, during hospitalization, all of the levels of the nutritional status values were significantly decreased. The periods of engraftment of the abnormal group according to their BMI, PIBW, HGB and HCT levels on the day of bone marrow transplantation showed no difference when compared to the normal group. However, the periods of engraftment of the abnormal group, according to the percentage of weight loss, albumin, and T protein levels were significantly decreased when compared to the normal group. Therefore, the nutritional status of patients at the time of transplant had a noticeable influence on the periods of engraftment. Our results suggested that nutritional status is a critical factor of engraftment in BMT during pre-transplant and post-transplant. Futhermore, we recommend that the process of nutritional preparation for the transplant should initiate immediately after the transplant decision has been made.

• Journal of Periodontal and Implant Science
• /
• 제32권1호
• /
• pp.173-186
• /
• 2002

The purpose of this study was to evaluate effect of platelet rich plasma on the treatment of Grade II furcation involvement, with Demineralized Freeze-Dried Bone(Dembone(R)) and bioabsorable membrane(BioMesh(R)) in humans by digital subtraction radiography. 12 teeth(control group) were treated with Demineralized Freeze-Dried Bone(Dembone(R)) and bioabsorable membrane(BioMesh(R)), and 12 teeth(test group) were treated with Demineralized Freeze-Dried Bone(Dembone(R)), bioabsorable membrane(BioMesh(R)) and Platelet Rich Plasma. The change of bone density was assessed by digital subtraction radiography in this study. The change of mineral content by as much as 5%(vol) could be perceived in the subtracted images. The change of mineral content was assessed in the method that two radiographs are put into computer program to be overlapped and the previous image is subtracted by the later one. Both groups were statistically analyzed by Wilcoxon signed Ranks Test and Mann-whitney Test using SPSS program (5% significance level). The results were as follows: 1. In test group, the radiopacity in 3 months after surgery were significantly increased than 1 month after surgery(p<0.05). However. there were no significant difference between 1 month after surgery and 3 months after surgery in control group(p>0.05). 2. In test and control group, the radiopacity in 6 months after surgery were significantly increased than 1 month after surgery(p<0.05) 3. In test and control group, the radiopacity in 6 months after surgery were significantly increased than 3 months after surgery(p<0.05). 4. There were no significant difference between test group and control group at 1 month, 3 months after surgery, but radiopacity in test group were significantly increased than control group at 6 months after surgery(p<0.05). In conclusion, Platelet Rich Plasma can enhance bone density.

• Journal of International Society for Simulation Surgery
• /
• 제3권1호
• /
• pp.36-38
• /
• 2016

Fibrous dysplasia is a relatively rare disease but the management would be quite challenging. Because this is not a malignant tumor, the preservation of the facial contour and the various functions seems to be important in treatment planning. Until now the facial bone reconstruction with autogenous bone would be the standard. Although the autogenous bone would be the ideal one for facial bone reconstruction, donor site morbidity would be the inevitable problem in many cases. Meanwhile, various types of allogenic and alloplastic materials have been also used. However, facial bone reconstruction with many alloplastic material have produced no less complications including infection, exposure, and delayed wound healing. Because the 3D printing technique evolved so fast that 3D printed titanium implant were possible recently. The aim of this trial is to try to restore the original maxillary anatomy as possible using the 3D printing model, based on the mirrored three dimensional CT images based on the computer simulation. Preoperative computed tomography (CT) data were processed for the patient and a rapid prototyping (RP) model was produced. At the same time, the uninjured side was mirrored and superimposed onto the traumatized side, to create a mirror-image of the RP model. And we molded Titanium mesh to reconstruct three-dimensional maxillary structure during the operation. This prefabricated Titanium-mesh implant was then inserted onto the defected maxilla and fixed. Three dimensional printing technique of titanium material based on the computer simulation turned out to be successful in this patient. Individualized approach for each patient could be an ideal way to restore the facial bone.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제26권6호
• /
• pp.557-564
• /
• 2000

The bone graft materials can be grossly divided into autogenous bone, allogenic bone, xenogenic bone, and alloplastic material. Much care was given to other bone graft materials away from autogenous bone due to its additional operation for harvesting, delayed resorption and limitation of quantity. Demineralized freeze-dried bone(DFDB) and hydroxyapatite are the representatives of bone graft materials. As resorbable hydroxyapatite is developed in these days, the disadvantage of nonresorbability can be overcome. So we planned to study on the strength and the bone formation at the rats calvarial defects of DFDB graft and those of the composite graft with DFDB and resorbable hydroxyapatite. We used the 16 male rats weighting range from 250 to 300 gram bred under the same environment during same period. After we made the 6mm diameter calvarial defect, we filled the DFDB in 8 rats and DFDB and resorbable hydroxyapatite in another 8 rats. We sacrificed them at the postoperative 1 month and 2 months with the periostium observed. As soon as the specimens were delivered, we measured the compressive forces to break the normal calvarial area and the newly formed bone in calvarial defect area using Instron(Model Autograph $S-2000^{(R)}$, Shimadzu, Japan). The rest of the specimens were stained with H&E(Hematoxylin & Eosin) and evaluated with the light microscope. So we got the following results. 1. In every rats, there was no significant difference between the measured forces of normal bone area and those of the bone graft area. 2. In 1 month, the measured forces at DFDB graft group were higher than those of the DFDB and resorbable hydroxyapatite composite graft group(P<0.05). 3. In 2 months, there was no significant differences between the measured forces of DFDB graft group and those of the DFDB and resorbable hydroxyapatite composite graft group. 4. In lightmicroscopic examination, most of the grafted DFDB were transformed into bone in 1 month and a large numbers of hydroxyapatite crystal were observed in DFDB and resorbable hydroxyapatite composite graft group in 1 month. 5. Both group showed no inflammatory reaction in 1 month. And hydroxyapatite crystals had a tight junction without soft tissue invagination when consolidated with newly formed bone. 6. In both groups, newly formed bone showed the partial bone remodeling and the lamellar bone structures and some of reversal lines were observed in 2 months. From the above results, it is suggested that DFDB and resorbable hydroxyapatite composite graft group had a better resistance to compressive force in early stage than DFDB graft group, but there would be no significant difference between two groups after some period. And it is suggested that the early stage of bone formation procedure of DFDB and resorbable hydroxyapatite composite graft group was slight slower than that of DFDB graft group, but there would be no significant difference between two groups after some period.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제28권2호
• /
• pp.118-126
• /
• 2006

In oral and maxillofacial surgery, bone graft is very important procedure for functional and esthetic reconstruction. So, many researcher studied about bone graft material like autogenous bone, allograft bone and artificial bone materials. The purpose of this study is to evaluate the quantity of bone generation induced by $Grafton^{(R)}$ graft, human allogenic demineralized bone matrix. Total 24 sites of artificial bony defects prepared using trephin bur(diameter 8 mm) on parietal bone of six adult New Zealand White rabbits. Experimental group had six defect sites which grafted $Grafton^{(R)}$(0.1 cc). Active control group had nine defect sites, into which fresh autogenous bone harvested from own parietal bone was grafted and passive control group had nine defect sites without bone graft. After six weeks postoperatively, the rabbits were sacrificed. The defects and surrounding tissue were harvested and decalcified in 10% EDTA, 10% foamic-acid. Specimens were stained with H&E. New bone area percentage in whole defect area was measured by IMT(VT) image analysis program. Quantity of bone by $Grafton^{(R)}$ graft was smaller than that of autograft and larger than that of empty defects. In histologic view $Grafton^{(R)}$ graft site and autograft site showed similar healing progress but it was observed that newly formed bone in active control group was more mature. In empty defect, quantity and thickness of new bone formation was smaller than in $Grafton^{(R)}$-grafted defect. $Grafton^{(R)}$ is supposed to be a useful bone graft material instead of autogenous bone if proper maintenance for graft material stability and enough healing time were obtained.

• Archives of Plastic Surgery
• /
• 제33권6호
• /
• pp.688-694
• /
• 2006

Purpose: Reconstruction of the craniofacial defects can be carried out with autogenous tissues, allogenic implants, or alloplastic materials. Titanium mesh systems have been used for bony reconstruction in non load-bearing areas. They offer several advantages: immediate availibility without any donor site morbidity, easy handling, stable 3-D reconstruction, and low susceptibility to infection. The aim of this study is to evaluate the usefulness and complications of titanium mesh system in the reconstruction of the craniofacial defects. Methods: From Jan. 2000, to Dec. 2004, we performed reconstruction of craniofacial bone defects in 21 patients who had benign or malignant tumor and fracture events in the cranium, orbit, nasal bone, maxilla, zygoma and the mandible. The size of the defects ranged from $1.0{\times}1.5cm$ to $12{\times}10cm$. Two different mesh systems, micro-titanium augmentation mesh and dynamic mesh was used for bony reconstruction in non load-bearing areas. The patients were evaluated from 1 to 4 yrs clinically and radiographically with a mean follow up period of 1.5 yrs. Results: There were no serious complications, including wound infection, foreign body reaction, exposures or loos of the mesh, central infection and pathologic findings of bone around mesh exception of one patient, who had expired of skull base tumor recurrence. Long-term stability of the reconstructions and the overall functional and aesthetic outcome was excellent. Conclusion: Our experiences demonstrate that the Titanium mesh system is a relatively safe and efficient method in the craniofacial reconstruction and have broadens our choices of therapeutic procedures in the craniomaxillofacial surgery.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제32권6호
• /
• pp.524-529
• /
• 2006

For the repairing of bone defect, autogenous or allogenic bone grafting remains the standard. However, these methods have numerous disadvantages including limited amount, donor site morbidity and spread of diseases. Tissue engineering technique by culturing stem cells may allow for a smart solution for this problem. Adipose tissue contains mesenchymal stem cells that can be differentiate into bone, cartilage, fat or muscle by exposing them to specific growth conditions. In this study, the authors procured the stem cell from buccal fat pad and differentiate them into osteoblast and are to examine the bone induction capacity. Buccal fat-derived cells (BFDC) were obtained from human buccal fat pad and cultured. BFDC were analyzed for presence of stem cell by immunofluorescent staining against CD-34, CD-105 and STRO-1. After BFDC were differentiated in osteogenic medium for three passages, their ability to differentiate into osteogenic pathway were checked by alkaline phosphatase (ALP) staining, Alizarin red staining and RT-PCR for osteocalcin (OC) gene expression. Immunofluorescent and biochemical assays demonstrated that BFDC might be a distinguished stem cells and mineralization was accompanied by increased activity or expression of ALP and OC. And calcium phosphate deposition was also detected in their extracelluar matrix. The current study supports the presence of stem cells within the buccal fat pad and the potential implications for human bone tissue engineering for maxillofacial reconstruction.

• Tuberculosis and Respiratory Diseases
• /
• 제57권2호
• /
• pp.183-187
• /
• 2004

저자들은 30세 남자 환자에서 골수이식 후 발생한 만성 이식편대숙주질환에 의한 폐쇄성 세기관지염으로 인하여 발병한 이차성 재발성 기흉의 임상적 진단 및 스테로이드와 면역 억제제 치료 후 호전된 증례를 경험하였기에 이에 문헌 고찰과 함께 보고하는 바이다.

• 대한골관절종양학회지
• /
• 제9권2호
• /
• pp.139-147
• /
• 2003

목적: 양성 골종양을 치료하기 위해 골이식 대체물을 이식하였을 때 골 유합을 얻을 수 있는지 여부와 골 이식 대체물 중 황산칼슘(calcium sulfate)과 수산화인회석 (hydroxyapatite)을 이용하여, 골 이식술 후 유합 정도를 비교하여 골 치유 과정에 대한 두가지 골 이식 대체물의 차이점을 보고하고자 한다. 대상 및 방법: 양성 골종양 환자 중 병소의 소파술 시행 후 골 이식 대체물을 이식한 20례를 대상으로 술전후 단순 방사선 소견상 병소 크기, 신생골의 형성, 병소의 재발 여부와 이식 후 조직학적 소견을 관찰하였다. 결과: 총 20례 중 남자가 13례, 여자가 7례였으며 평균 연령은 15.8세(2~5), 술 후 평균 추시 기간은 3년이었다. 방사선 사진상 병소의 면적은 평균 30.7 $cm^3$였으며, 최종 추시상 전체 20례 중 19례에서 성공적인 결과를 보였으며, 1례에서 병소의 재발을 보였다. 나이, 병소 크기와 병변 종류에 따른 차이는 관찰되지 않았다. 결론: 황산칼슘은 생체 적합성이 뛰어나고, 골 전도 작용이 있으며 새로운 골형성에 비례하여 생체내로 흡수되는 특성을 보였고, 이에 반해 수산화인회석은 골 전도 작용이 있지만, 병변의 크기나 주위 환경에 따라 자가골, 자가 골수 이식, 이종골과 병행 사용시 양호한 골치환 결과를 얻을 수 있을 것으로 사료되며, 황산칼슘에 비해 더 느리게 생체내로 흡수되는 결과를 보였다.

• Journal of Yeungnam Medical Science
• /
• 제32권2호
• /
• pp.98-101
• /
• 2015

Bronchiolitis obliterans (BO), which is associated with graft-versus-host disease after allogenic hematopoietic stem cell transplantation, is a major obstacle to survival after bone marrow transplantation due to its gradual progress, eventually leading to respiratory failure. Pumpless extracorporeal interventional lung assist (iLA) is effective in treatment of reversible hypercapnic respiratory failure. In this paper, we present a 23-year-old female patient who underwent allogeneic peripheral blood stem cell transplantation (PBSCT) for acute lymphocytic leukemia. After 6 months, she complained of shortness of breath and was diagnosed with BO. Five months later, she developed an upper respiratory tract infection that worsened her BO and caused life-threatening hypercapnia. Since mechanical ventilation failed to eliminate $CO_2$ effectively, iLA was applied as rescue therapy. Her hypercapnia and respiratory acidosis showed significant improvement within a few hours, and she was successfully weaned off iLA after 12 days. This is the first case report of iLA application for temporarily aggravated hypercapnia of PBSCT-associated BO followed by successful weaning. This rescue therapy should be considered in ventilator-refractory reversible hypercapnia in BO patients.