• 한국응용과학기술학회지
• /
• 제27권3호
• /
• pp.273-281
• /
• 2010

Nickel recovery method was studied by the wet process from the catalyst used in hydrogenation process. Nickel content in waste catalyst was about 16%. At the waste catalyst leaching system by the alkaline solution, selective leaching of nickel was possible by amine complex formation reaction from ammonia water and ammonium chloride mixed leachate. The best leaching condition of nickel from mixed leachate was acquired at the condition of pH 8. LIX65N as chelating solvent extractant was used to recover nickel from alkaline leachate. The purity of recovered nickel was higher than 99.5%, and the whole quantity of nickel was recovered from amine complex.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2015년도 추계학술대회 논문집
• /
• pp.196-197
• /
• 2015

ZnSe의 전기화학적 거동은 각각 다른 pH를 갖는 전해질에서의 linear sweep voltammogram 분석에 의해 체계적으로 고찰되었다. 제어된 조성을 갖는 칼코지나이드 ZnSe 박막이 complexing agent의 역할을 하는 citrate를 포함한 알카리 용액에서 전해 증착되었다. 다른 pH의 전해질에서 증착된 ZnSe 박막의 형상을 분석하고, 추가적으로 다른 pH의 전해질 및 어닐링 온도 변화에 따른 ZnSe 박막의 XRD분석이 이루어졌다.

• Natural Product Sciences
• /
• 제4권4호
• /
• pp.226-229
• /
• 1998

Methanolic extract of Cassia tora leaves was evaluated for its hepatoprotective activity in rats by inducing hepatotoxicity with paracetamol (acute model). The extract at a dose of 400 mg/kg orally exhibited significant protective effect by lowering the serum levels of transaminase (SGOT and SGPT), bilirubin, and alkaline phosphatase (ALP). The effects produced were comparable to that of a standard hepatoprotective agent.

• 약학회지
• /
• 제16권4호
• /
• pp.155-161
• /
• 1972

The hydrolysis of phenobarbital is decelerated in alkaline solution by betacyclodextrin. The betacyclodextrin inhibits the degradation of phenobarbital up to 1.5 fold in the system containing 1% betacyclodextrin. The degradation mechanism in systems containing betacyclodextrin is the same that in system without complexing agent, although the rate constants are different. The pH dependence of the hydrolysis rate deceleration is compared with the ionization percent of betacyclodextrin. The results indicate that a direct relationship does not exist between the ionization of betacyclodextrin. It seems reasonable therefore that the phenobarbital undergoes a stable complex with betacyclodextrin and complex formation would provide a better shield for the phenobarbital from hydroxyl ion attack.

• Archives of Pharmacal Research
• /
• 제12권2호
• /
• pp.119-124
• /
• 1989

Cotton xanthate, which was obtained by treating cotton with carbon disulfide in alkaline solution, was treated with the solution of polyvalent metal ions to produce cotton xanthate-metal chelates. This chelation reaction was readily and simply achieved, and antimicrobial agents with suitable structures could subsequently be coupled to the chelate with ease at moderate pH values and in aqueous solution. Metal ions used in present work include Cu(II), Zn(II) and Fe(III). Tetracycline, streptomycin, neomycin and pyrithion were used as antimicrobial/antifungal agents. Antibacterial activities were measured employing ditch plate method against G(+) Staphylococcus aureus, Streptococus faecalis, and G(-) Escherichia coli, Enterobacter aerogenes, and the fungus, Aspergillus niger. All the cotton xanthate-metal-antimicrobial agent chelates exhibited activities whereas the cotton xanthate-metal chelates themselves were inactive. Considering the extensive washing procedures and results from control experiments, possibility of the involvement of physical adsorption for the binding of drugs could be excluded.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2006년도 추계학술발표논문집
• /
• pp.9-14
• /
• 2006

Deinking is a series of unit operations designed to detach ink from cellulose fibers and separate the dispersed ink from the pulp slurry. Deinking chemicals are process aids that enable expensive mill equipment used in these unit operations to operate more efficiently. This paper presents an overview of ONP deinking efficiency with cellulolytic enzymes and synthetic collector in low alkalinity process. The deinking efficiency of old news print even in low alkalinity condition was enhanced with enzyme contained complex agent. The brightness of deinked pulp was increased with less residual ink particles and yield of deinked pulp was improved compared to the deinked pulp of conventional alkaline method.

• 한국염색가공학회지
• /
• 제11권3호
• /
• pp.23-31
• /
• 1999

In order to investigate the detergency of the mixture of compact detergent and bleaching agent to fabric stained with a coffee and a red wine, respectively, and a japanese wet stained fabrics, to evaluation of detergency was studied under various washing conditions. In order to study the effect of alkaline agent addition on the detergency, the soda ash was added in the compact detergent system. The results are as follows : In a low temperature washing condition, the alkalinity of washing liquor effected more the removal of the composite stained fabrics than that of oilic stained fabrics. For the colored stained fabric such as red wine stained sample, the influence of the repeated washing treatment on the detergency was not significant factor. On the other hand, the influence of the repeated washing treatment for the coffee stained and japanese wet stained fabric on the detergency was gradually increased.

• 펄프종이기술
• /
• 제35권4호
• /
• pp.34-41
• /
• 2003

The effect of wettability of deinking agents which formed with various nonionic surfactants against the pulp fibers and ink particles were studied, And the effect of flotation processes on the deinking were also investigated. The wettabilities of the deinking agents against the water and ink particles were measured by Washburn tube and sessile drop techniques, respectively. As the water absorption increased (i.e., hydrophilicity increased), the ink removal increased, which indicates that the ink removal is strongly affected by the detachment process due to the swelling of the pulp. Also, when the contact angle of air/ink/deinking agent increased, the hydrophobicity of the ink particles increased, the efficiency of the ink removal and the brightness increased.

• 한국세라믹학회지
• /
• 제52권6호
• /
• pp.479-482
• /
• 2015

The flue gas desulfurization (FGD) process is one of the most effective methods to reduce the amount of $SO_2$ gas (up to 90%) generated by the use of fossil fuel. Limestone is usually used as a desulfurizing agent in the wet-type FGD process; however, the limestone reserves of domestic mines have become exhausted. In this study, limestone sludge produced from the steel works process is used as a desulfurizing agent. Seven different types of additives are also used to improve the efficiency of the desulfurization process. As a result, alkaline additive is identified as the least effective additive, while certain types of organic acids show higher efficiency. It is also observed that the amount of FGD gypsum, which is a by-product of the FGD process, increases with the used of some of those additives.

• 한국응용과학기술학회지
• /
• 제28권2호
• /
• pp.146-151
• /
• 2011

In this study, by using oleic acid and polypropylene glycol, good natured antifoaming agent for suitable electronics process under the alkaline conditions were synthesized. For the synthesized mono and diesters, acid value, hydroxyl value was measured, and identified by FT-IR and $^1H-NMR$ spectroscopy. Surface properties such as surface tension, critical micelle concentration(cmc) for diluted aqueous solution was measured, and tested the antifoaming properties according to the difference of alkyl chain length, various concentration, temperature and pH. The surface tension of synthesized antifoaming agent, PPMO(Polypropylene glycol monooleate) was 24.3 dyne/cm, PPDO(Polypropylene glycol dioleate) was 23.7 dyne/cm. By increasing of the alkyl chain length, surface tension was decreased slightly, and showed good antifoaming properties at 0.06 wt% concentration and $50^{\circ}C$, pH 11. These synthesized compounds are expected to apply as a suitable antifoaming agents in the semiconductor and the PCB(Printed Circuit Board) manufacturing process.