• 대한화학회지
• /
• 제53권6호
• /
• pp.709-716
• /
• 2009

일정한 이온 세기의 알칼리 용액에서 과망간산에 의한 프포독심 프록세틸(Cefpodoxime Proxetil) 의 산화의 속도론적 경로가 분광광도법적으로 연구되었다. 그 반응은 과망간산 이온 농도에서 일차 속도론적으로 나타났으며, 프포독심 산과 알칼리 농도에서 단일 이하의 차수를 나타내었다. 용매의 이온 세기가 증가함에 따라 속도도 증가하였다. 산화 반응은 프포독심 산과 함께 복합체를 형성하는 알칼리-과망간산 종들을 통하여 진행된다. 반응물을 만들기 위해서 프포독심 산의 자유 라디칼과 과망간산의 다른 분자 사이의 빠른 반응에 이어서 다음 분해가 천천히 진행된다. 다양한 온도에서 반응의 조사는 제안하는 메커니즘의 느린 단계를 고려한 활성화 변수들의 결정할 수 있게 하고 일차 속도론을 따른다. 제안하는 메커니즘과 유도된 속도 법칙들은 관찰된 속도들과 일치하였다.

• 대한금속재료학회지
• /
• 제50권1호
• /
• pp.52-58
• /
• 2012

Hydrogen-delayed fracture (HDF) was analyzed from the deposited weld metals of 600-MPa and 800-MPa flux-cored arc (FCA) welding wires, and then from the diffusible hydrogen behavior of the weld zone. Two types of deposited weld metal, that is, rutile weld metal and alkali weld metal, were used for each strength level. Constant loading test (CLT) and thermal desorption spectrometry (TDS) analysis were conducted on the hydrogen pre-charged specimens electrochemically for 72 h. The effects of microstructures such as acicular ferrite, grain-boundary ferrite, and low-temperature-transformation phase on the time-to-failure and amount of diffusible hydrogen were analyzed. The fracture time for hydrogen-purged specimens in the constant loading tests decreased as the grain size of acicular ferrite decreased. The major trapping site for diffusible hydrogen was the grain boundary, as determined by calculating the activation energies for hydrogen detrapping. As the strength was increased and alkali weld metal was used, the resistance to HDF decreased.

• 콘크리트학회논문집
• /
• 제28권3호
• /
• pp.299-308
• /
• 2016

본 연구에서는 플라이애시와 고로슬래그시멘트를 혼합한 결합재에 알칼리 활성화제와 해수 및 증류수를 사용하여 제작한 경화된 시편에 대해 물리적 및 미세구조 특성을 분석하였다. 플라이애시와 고로슬래그시멘트의 결합재 혼합 중량비는 6:4, 7:3 및 8:2로 하였으며, 수산화나트륨과 규산나트륨을 결합재의 각각 5wt%로 하여 활성화제로 사용하였다. 재령 3, 7 및 28일에 대해 압축강도 및 흡수율을 측정하였으며, 재령 28일에 XRD, TGA 및 MIP 시험을 실시하였다. 배합수의 종류와 관계없이, 알칼리 활성화된 결합재는 고로슬래그시멘트 혼합비가 증가할수록 ettringite 및 C-S-H의 생성량이 많아졌으며, 또한 50 nm 보다 큰 공극들이 줄어듦에 따라 압축강도가 높아지는 결과를 보여주었다. 본 연구의 모든 배합에 대해서 공통적으로 확인된 반응생성물로는 C-S-H, $Ca(OH)_2$ 및 calcite인 것으로 나타났다. 해수를 사용한 시편들과 증류수를 사용한 시편들 내에 생성된 주요 반응생성물의 차이는 hydrocalumite인 것으로 나타났다. 각각의 결합재 혼합 중량비에 대해서 증류수 및 해수 사용에 따른 시편들의 압축강도에서는 배합수로 해수가 사용되더라도 증류수가 사용된 시편과 대체적으로 유사한 강도발현을 나타내었으며, 또한 재령에 따른 강도증진율이 증류수가 사용된 시편보다 뛰어난 경우도 확인되었다. 배합수로서의 해수 사용은 해수에 함유되어 있는 염화 이온(Cl-)이 결합되면서 생성된 hydrocalumite가 공극을 매우면서 시편 내의 총공극용적을 감소시키는 것으로 나타났다.

• 콘크리트학회논문집
• /
• 제25권3호
• /
• pp.261-269
• /
• 2013

이 연구에서는 산업부산물인 고로슬래그 미분말과 알칼리 활성화제(물유리, 수산화나트륨)를 사용하였다. 또한, 이를 활용하여 철근콘크리트 보에 적용하여 휨성능 평가를 하였다. 주요변수는 W/B, 알칼리 활성화제의 혼입비율, 혼화재의 종류 및 혼입유무로서 총 8개의 실험체를 제작하였으며, 재료 및 구조성능 평가를 위한 실험을 수행한 결과 다음과 같은 결론을 얻었다. 친환경 무기결합재 콘크리트는 초기 경화속도가 빠르며, 고강도 콘크리트의 가능성을 보였다. 또한, 이를 활용한 철근콘크리트 보는 기존 시멘트를 사용한 철근콘크리트 보와 유사한 거동과 파괴양상을 보였다. 친환경 무기결합재 콘크리트가 시멘트 콘크리트를 대체할 수 있는 기초연구로서 향후 건설소재 및 재료분야에 활용할 수 있을 것으로 사료되며, 이러한 특성을 바탕으로 콘크리트 2차 제품 생산과 구조부재를 PC화하여 활용할 경우 생산성 향상, 공기단축 등 효율이 상승될 것으로 보인다.

• Advances in concrete construction
• /
• 제9권2호
• /
• pp.207-215
• /
• 2020

This paper describes the experimental studies carried out to determine the properties of fresh and hardened concrete with Recycled Plastic Waste (RPW) as a partial replacement material for fine aggregates. In the experimental study, RPW was used for replacing river sand and manufactured sand (M sand) aggregates in concrete. The replacement level of fine aggregates was ranging from 5% to 20% by volume with an increment of 5%. M40 grade of concrete with water cement ratio of 0.40 was used in this study. Two different types of RPW were used, and they are (i) un-activated RPW and (ii) activated RPW. The activated RPW was obtained by alkali activation of un-activated RPW using NaOH solution. The hardened properties of the concrete determined were dry density, compressive strength, split tensile strength, flexural strength and ultrasonic pulse velocity (UPV). The properties of the concrete with river sand, M sand, activated RPW and un-activated RPW were compared and inferences were drawn. The effect of activation using NaOH solution was investigated using FT-IR study. The micro structural examination of hardened concrete was carried out using Scanning Electron Microscopy (SEM). The test results show that the strength of concrete with activated RPW was more than that of un-activated RPW. From the results, it is evident that it is feasible to use 5% un-activated RPW and 15% activated RPW as fine aggregates for making concrete without affecting the strength properties.

• 공업화학
• /
• 제3권4호
• /
• pp.710-716
• /
• 1992

에틸페닐카바메이트를 $120^{\circ}C$, 79 atm에서 전이금속촉매와 할로겐화 알칼리금속을 조촉매로하여 아닐린의 산화적 카르보닐화반응에 의하여 합성하였다. 산화제로서 산소를 사용하였으며 반응속도를 조사하고 활성화에너지를 추정하였다. 5시간 반응후 전환율은 100%, 선택도는 95%이었고 촉매로서는 Pd촉매가 Rh촉매보다 약간 효과가 좋았으며 조촉매로서의 효율은 KI>KBr>KCl 순이었다. $75^{\circ}C$에서 $120^{\circ}C$사이에서 온도의 증가에 따라 반응속도가 증가되었으며 반응은 겉보기 1차반응이었고 활성화 에너지는 5% Pd/C와 5% Rh/C에서 각각 5.647, 5,780 kcal/mol이었다.

• Carbon letters
• /
• 제18권
• /
• pp.49-55
• /
• 2016

Refuse-derived fuel (RDF) produced using municipal solid waste was pyrolyzed to produce RDF char. For the first time, the RDF char was used to remove aqueous copper, a representative heavy metal water pollutant. Activation of the RDF char using steam and KOH treatments was performed to change the specific surface area, pore volume, and the metal cation quantity of the char. N₂ sorption, Inductively Coupled Plasma-Atomic Emission Spectrometer (ICP-AES), and Fourier transform infrared spectroscopy were used to characterize the char. The optimum pH for copper removal was shown to be 5.5, and the steam-treated char displayed the best copper removal capability. Ion exchange between copper ions and alkali/alkaline metal cations was the most important mechanism of copper removal by RDF char, followed by adsorption on functional groups existing on the char surface. The copper adsorption behavior was represented well by a pseudo-second-order kinetics model and the Langmuir isotherm. The maximum copper removal capacity was determined to be 38.17 mg/g, which is larger than those of other low-cost char adsorbents reported previously.

• 한국미생물·생명공학회지
• /
• 제22권1호
• /
• pp.45-51
• /
• 1994

Antitumor polysaccharides were known to activate complement system and to increase specific serum proteins in mouse, and researcher reported that antitumor activity of polyasccharides might be correlated with their biological properties such as activation of complement system and increase of specific protein $L_{A}$, $L_{B}$ and $L_{C}$ within the mouse serum. In case of several Ganoderma lucidum, there was no correlation between their antitumor activities and their bioloical properties, but the antitumor activities against sarcoma 180 of the alkali extracted crude polysaccharide fractions of the Ganoderma lucidum IY 009. AS, T, AI and M were correlated with their bioloical properties such as anticomplementary activity and intensity of mouse serum protein $L_{A}$, $L_{B}$ and $L_{C}$.

• 한국세라믹학회지
• /
• 제48권6호
• /
• pp.610-616
• /
• 2011

The effect of curing temperature on basic geopolymeric reactivity and hardening behaviour of blast furnace slag were investigated using the mixture of pulverized slag and several alkaline solutions of relatively high concentration. For the pastes prepared at several different temperatures between 20$^{\circ}C$ and 90$^{\circ}C$, setting time and heat of reaction were examined while mineralogical and morphological examinations were performed for the hardened paste after curing period at same temperature. The geopolymeric reaction of slag was revealed to be accelerated strongly according to the curing temperature regardless of the sort and concentration of the alkaline solution. The increase of concentration of the alkaline solution within 9M and the existence of silicic ion in the solution also promoted the reaction severely. The mineral component and their ratio of the hardened paste were revealed to be influenced by the chemical species and silicic ion contained in alkaline solution rather than by the curing temperature. The higher temperature and longer period of curing stage were effective for the sustained formation of geopolymer and succeed improvement of density and uniformity of morphology of the final hardened body.

• 한국건축시공학회지
• /
• 제13권1호
• /
• pp.29-37
• /
• 2013

In this study, a zero-cement brick is manufactured by replacing cement with recycled aggregates and blast furnace slag powder. Experimental tests were conducted with standard sized samples of $190{\times}57{\times}90mm$ (KS F 4004), and this manufacturing technique was simulated in practice. Results showed that the zero-cement brick with 0.35 W/B had the highest compressive strength, but the lowest absorption ratio. This absorption ratio of zero-cement brick with 0.35 W/B was lower than the required level determined by KS F 4004. Hence, to increase the absorption ratio, crushed fine aggregate (CA) and emulsified waste vegetable oil (EWO) were used in combination in the zero-cement brick. It was found that the zero-cement brick with CA of 20% and EWO of 1% had the optimum combination, in terms of having the optimum strength development (12 MPa) and the optimum absorption ratio (8.4%) that satisfies the level required by KS. In addition, it is demonstrated that for the manufacturing of zero-cement brick of 1000, this technique reduces the manufacturing cost by 5% compared with conventional cement brick.