방사선 조사 전분류의 확인방법 연구의 일환으로 0, 1.5, 3.0, 4.5 및 6.0 kGy의 감마선을 조사한 옥수수 전분, 고구마 전분 및 감자 전분을 대상으로 일정 조건에서 조사선량별 점도를 Brookfield DV-III programmable rheometer를 사용하여 측정하였다. 전분 현탁액의 농도를 옥수수 전분 8.0%(건물량 7.2%), 고구마 전분 8.5%(건물량 7.3%) 및 감자 전분 9.0%(건물량 7.3%)로 조제하여 100rpm에서 점도를 측정한 결과, 모든 시료에서 조사선량이 증가함에 따라 점도가 유의적으로 감소하였고 (p<0.05), 각각 $R^2$ 0.9754, 0.9618 및 0.9888의 높은 상관성이 확인되었다. 또한 1.5 kGy 조사선량에서도 옥수수 전분 34%, 고구마 전분 57%, 감자전분 51%의 점도 감소가 일어나 저선량 조사의 경우에도 뚜렷한 점도 변화가 관찰되어 방사선 조사 전분류의 확인방법으로써 적용 가능성이 높은 것으로 나타났다. 점도 측정에 의한 조사여부 판별의 신뢰도를 높일 수 있는 보조적인 확인 marker로써 용해도, 팽윤력, 청가 및 알칼리수를 검토한 결과, 조사선량이 증가함에 따라 용해도 및 알칼리수는 유의적으로 증가(p<0.05)한 반면, 팽윤력은 유의적으로 감소(p<0.05)하는 경향이 확인되었다.
Poly(vinyl alcohol) (PVA)/gelatin(GEL) 블렌드막을 고전장하에서 제조한 후, 팽윤거동 및 이온투과 특성을 연구하였다. 알칼리 금속염(LiCl, NaCl, KCl)에 대한 투과 실험 결과, 인가된 전장의 강도가 10 kV까지 증가하면 막의 곡로율이 감소하여 이온 투과도가 증가하지만, 10 kV이상이 되면 막의 결정화도의 증가 영향이 커져 투과도는 감소하였다. 완충용액에 대한 팽윤 실험에서 pH 6을 기점으로 산성영역 혹은 염기성 영역으로 갈수록 하전기간의 반발로 인하여 팽윤도가 증가함을 관찰하였다. 제조된 블렌드막의 KCl 투과도 계수는 pH 6에서 극대값을 보였고, 산성 혹은 염기성 영역으로 갈수록 급격히 감소되는 것을 확인하였다. 이러한 거동은 막내 존재하는 관능기들이 해리함에 따라 용해도 증가 영향보다는 Donnan 배제효과가 우세하게 작용하기 때문인 것으로 생각된다. 특히 온도에 따른 투과거동에서 $40^{\circ}C$를 기점으로 KCl 투과도 계수가 약 5배 정도 급격히 증가함을 보여주었다.
Physicohemical properties of corn starches isolated from non-glutinous and corn grains fol-lowing γ-irradiation up to 10kGy were investigated. Blue value, water binding capacity and swelling power decreased, while alkali number ad solubility increased by γ-irradiation , which was more pronounced in glu-tinous corn starch than in non-glutinous corn starch. The optical transmittance increased with an increment of heating temperature and applied irradiation doses. No significant difference was observed in Hunter's color value between both starches isolated from non- irradiated and irradiated and irradiated corn grains. Amylograph viscosities decreased remarkably as dose levels increased. The overall effects of γ-irradiation was more distinguished in glutinous starch than in non-glutinous starch.
To develop a production method for modified starches with less pollution, pH adjustment and gamma irradiation were applied to commerical corn starch. Blue values were significantly decreased , while alkali number, optical transmittance and solubility markedly increased when gamma irradiation was applied to pH 2 adjusted corn starch. Water binding capacity and swelling power at pH 5 were the highest among the samples. Gelatinization viscosity was considerably affected by gamma irradiation and pH of the starch. Gamma irradiation of pH 2 adjusted starch showed the lowest peak viscosity and the best cooling stability among the tested samples . Therefore, the production of modified starch with low viscosity as well as with sufficient viscosity stability seems feasible by controlling the pH of the starch and gamma irrdiation.
대한화장품학회 2003년도 IFSCC Conference Proceeding Book II
/
pp.192-199
/
2003
Trimethylglycine, commonly named betaine, is the most simple amphoteric molecule. It is completely vegetal (1,2), as it is produced in the sugar industry by industrial chromatography of molasses. While abundantly used in foods and diet supplements, many interesting applications in cosmetics have recently been investigated, like its capability to increase the volume and stability of foams in surfactant solutions. For its special chemical structure (it is the internal salt of a weak acid and a strong alkali) trimethylglycine is a solvent and buffering agent for strong acids and Lewis' acids. It allows to improve the efficiency of $\alpha$- and $\beta$-hydroxy acids in increasing the physiological rate of epidermal cell renewal, while keeping a low skin-irritation level. In oral care cosmetics, it acts as a mucous membrane protectant (3). For its special water co-ordination capability, its solubilising power, polymer swelling capability, after-feel improvement in hair products, skin moisturization and elasticity enhancing properties, trimethylglycine provides unusual characteristics to many products intended for skin maintenance (4).(omitted)
The recycling rate of recovered paper in Korea is the highest in the world, 92%, but remanufacturing yield is low due to the extremely poor quality of the paper. The poor quality, in turn, influences to the reject amount in deinking process. To increase the yield of old newspaper recycling process, hydrophobic degree of inorganic pigments of deinking stock must be reduced. To determine the hydrophobicity, Pitch Potential Deposit Tester (PDT) was newly designed and applied with respect to the SB latex property of various quality used in Korea; its hydrophobic degree according to Tg, gel content, charge and particle size of latex and optimum designing condition of SB latex. And below are the conclusions: 1. The reason of excessive reject from old newspaper deinking process for total amount of printed ink is loss of inorganic pigments. When lipase, a biochemical catalyst, was applied with the purpose of preventing inorganic pigments loss about more than 70% of total reject weight and promoting hydration of pulp for deinking, deinking process yield of pre flotation secondary stage increased remarkably without any changes of deinking efficiency. 2. Lipase improved deinking stock by cutting ester linkage on surface of hydrophobic materials to promote its hydration. From this, it reached the conclusion that hydration degree of stock exercises significant effect on flotation deinking process yield. 3. Inorganic alkali promotes hydration of deinking stock. But there have been needs for more fundamental measures other than inorganic alkali of promoting hydration for yield improvement. For this, this study intended to find out reasons of chemical properties change on surface of hydrophobic material by change of pH. 4. Pitch Deposit Test (PDT) was performed for understanding principle of why surface of coating flake from OMG is hydrophobic and why it becomes hydrophilic when pH of stock is alkaline. As a result of this test, it is determined that swelling property by change of pH of latex film, which were used as coating adhesive is the reason for hydrophobic change. 5. Hydrophilicity of coating flake increased with hydrophilic pigments. And as more of SB Latex adhesive was used and higher of calcium hardness of stock became, its hydrophilicity decreased. SB Latex adhesive film is reformed by mechanical friction. For having hydrophilicity under neutral pH, strong bruising action such as kneading is required. 6. Because swelling of adhesive film decreases as Tg of SB latex gets lower and mean diameter gets smaller, it shows hydrophobicity under neutral pH. This lowers hydrophilicity of coating flake, which leads to easy elimination with flotation reject on DIP process. Therefore, for improving future flotation yield, it is necessary to develop to use eco-friendly clean SB latex by raising Tg and increasing mean diameter for recycling, and as a result, to reduce excessive loss of coating flake as a reject from deinking process.
6개 품종의 감자에서 분리한 전분의 물리화학적 특성을 조사하였다. Arkula에서 분리한 전분은 다른 품종에 비해 회분 함량이 훨씬 낮았다. 분리 전분입자의 형태는 난형과 구형이었고, 평균입경은 $25{\sim}26.9{\mu}$였다. 전분의 무기질 성분중 인산과 칼륨이 가장 중요한 성분이었다. 분리전분의 아밀로스 함량은 $32{\sim}27.2%$의 범위였고, blue value와 alkali number는 각각 $0.42{\sim}0.45$, $5.8{\sim}7.7$ 정도였다. 아밀로그람에 의한 호화 개시온도는 $63.5{\sim}68^{\circ}C$의 범위였고, Noot Sack이 모든 지표에서 가장 높은 값을 나타내었다. 팽윤력과 용해도는 $50^{\circ}C$까지는 큰 변화가 없었으나, 그후 급격히 증가했다.
감마선 조사기법을 사용하여 새로운 건식공정의 공업용 변성전분 생산 기술개발을 위한 기초연구로서, 시판 옥수수 전분에 직접 감마선을 조사하여 감마선 조사 전분(0-110 kGy)의 이화학적 성질을 검토하였다. 감마선 조사선량이 증가함에 따라 blue value가 직선적으로 감소하였으며, alkali number와 용해도는 크게 증가하였다. $65-95^{\circ}C.$의 온도범위에서 전분용액의 광투과도 또한 감마선 조사선량이 증가함에 따라 현저히 증가하였으며, 물결합능력과 팽윤력은 각각 30 kGy 및 10kGy에서 최대값을 나타내다가 다시 감소하는 경향을 나타내었다. 비조사 전분에 비해 감사선 조사 전분의 호화점도는 현저한 감소 현상을 나타내었다. peak 점도의 경우 7,000 B.U.(비조사 전분)에서 60 B.U.(110kGy)로 그 값이 100배 이상 현저히 감소하였으며 $30^{\circ}C$의 냉각점도도 약 300배 이상 급격한 감소를 나타내었다. 현재 시판중인 산처리 전분은 30kGy의 감마선조사 전분과 유사한 특성을 나타내었으며, 산화전분은 100kGy의 감마선 조사전분과 유사한 성질을 나타내었다.
입자 분포가 균일하며, 마이크론 크기를 가지는 중공 유기 안료에 대한 합성 방법을 연구하였다. 코어-쉘 합성 방법에 의해 다양한 크기의 중공 유기 안료를 합성할 수 있었으며, 각각의 코어 크기 및 분자량에 따른 최종 입자 크기 변화 및 반응 중 코어의 중화 시간에 따른 은폐율 변화에 대한 실험을 진행하였다. 그 결과 사용한 코어 크기가 클수록 최종 입자 크기는 증가되며, $1.0{\mu}m$ 이상의 마이크론 크기를 가지는 중공 유기 안료를 합성하기 위해서는 적어도 200 nm 이상의 코어를 사용해야 함을 알 수 있었다. 또한, 사용한 코어 크기가 클수록 중공 부피비가 증가되나, 은폐율을 높이기 위해서는 코어의 분자량을 줄이거나, 코어의 알카리 팽윤 단계에서 중화 시간을 증가시켜 주어야 한다. 그리고, 반응 중 교반 속도 및 합성 고형분이 마이크론 크기의 중공 유기 안료 합성에 끼치는 영향을 알아보았다.
알칼리 침지법에 의하여 박피한 밤 전분과 박피하지 않은 밤 전분의 이화학적 특성, 가열 및 알칼리에 의한 호화특성을 각각 분석한 결과는 다음과 같다. 물결합력은 박피한 A전분의 경우86.9%, 박피하지 않은 B전분은 80.66%로 박피한 A전분이 더 높은 물결합력을 나타냈다. A전분과 B전분의 팽윤력은 $60^{\circ}C$에서 급격히 증가하기 시작하여 $80^{\circ}C$까지 증가하다가 그 이후는 완만하게 변하였고, 용해도는 $60^{\circ}C$에서부터 증가하기 시작하여 온도가 상승함에 따라 점점 증가하는 특성을 보였으며, A전분이 B전분보다 팽윤력과 용해도가 더 높게 나타났다. 요오드 반응은 A전분이 B전분보다 더 높게 났다. X-선 회절도는 A전분은 $C_b$도형, B전분은 B도형으로 나타났고, 상대적 결정화도는 A전분이 36.2%, B전분은 37.0%로 B전분이 더 높게 나타났다. DSC에 의하여 측정한 호화온도 및 호화엔탈피는 A전분의 경우 $66.95^{\circ}C{\sim}77.5^{\circ}C$, 2.04 cal/g, B전분의 경우 $67.09^{\circ}C{\sim}77.5^{\circ}C$, 2.29 cal/g으로 나타났다. 6.5% 밤 전분의 아밀로그램 특성은 A전분보다 B전분이 호화개시 온도가 더 높았고, peak viscosity, break-down, setback은 A전분이 B전분보다 더 높았다. 알칼리에 의한 호화특성에서 A전분이 B전분보다 점도, gel 부피 및 광투과도가 더 높게 나타났다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.