• 펄프종이기술
• /
• 제44권4호
• /
• pp.51-61
• /
• 2012

The new alkali pulping process combined with electron beam treatment was applied to utilize hemp bast tissues as a new valuable fibrous resource. Hemp bast tissues have some chemical properties with high lignin contents and holocellulose not to be defiberized by alkali pulping only, compared with the bast tissue of paper mulberry. To make up for the weakness of traditional alkali pulping process, electron beams were directly irradiated into the swelled bast tissue of hemp in NaOH solution and distilled water, and then facilitated the defiberization of hemp bast tissues. The papermaking from hemp bast fibers manufactured by the combination pulping process showed good apparent density, formation structure and air permeability, and had some mechanical properties with lower tensile, tear, burst strength and folding endurance. It is finally concluded that the combination pulping process with electron beam treatment could be suggested a new alternative for non-woody fibers.

• 펄프종이기술
• /
• 제42권2호
• /
• pp.67-74
• /
• 2010

This study was carried out to investigate the pulping and papermaking characteristics of lotus (Nelumbo nucifera G.) leafstalk for the development of high performance paper. Anatomical and chemical properties of the lotus leafstalk were analyzed. The pulping and papermaking properties of the lotus leafstalk by conventional alkali and sulfomethylated pulping processes were also evaluated. The length and width of fibers were 0.06-3.32 mm (av. 1.23 mm) and 3.47-25.6 ${\mu}m$ (av. 20.7 ${\mu}m$), respectively. The length and width of vessel elements were 0.07-0.78 mm (av. 0.20 mm) and 14.1-330.0 ${\mu}m$ (av. 54.13 ${\mu}m$), respectively. The fiber length/fiber width ratio was 60.20. The extractives (cold water, hot water, 1% NaOH and ethanol-benzene) and lignin content of lotus leafstalk were higher than those of plant bast fiber. The contents of holocellulose, lignin, and ash were 73.8%, 24.3%, and 4.3%, respectively. The pulp yields based on pulping methods were sulfomethylated pulping av. 52%, and alkaline pulping av. 42%. The conventional alkaline pulping shows better pulp and sheet properties than the sulfomethylated pulping which was modified pulping processes. But the sulfomethylated pulping shows higher brightness than alkali pulping. In the consequence of FE-SEM observation, lotus leafstalk pulp consists of various kinds of thin walled fibers which have large amount of small pits.

• 펄프종이기술
• /
• 제42권2호
• /
• pp.88-94
• /
• 2010

Cattail (Typha L.) was used as a raw material for producing both bio-ethanol and pulp for papermaking at the same time. Pretreatments of cattail stems and leaves with acid ($H_2SO_4$) and alkali (NaOH) in three different addition levels were studied before soda pulping. The acid pretreatment gave reducing sugar of 15.2% of initial weight, but alkali pretreatment close to 1%. Soda pulping of the pretreated cattail gave 3% reduction in pulp yield and less bonding properties in paper; however, refining of the pulp from the pretreated cattail with alkali restored their fiber bondings up to that of the pulp from no-pretreated cattail at equivalent freeness.

• 펄프종이기술
• /
• 제31권3호
• /
• pp.96-104
• /
• 1999

Anatomical and chemical properties of three mulberry species (Morus spp) were analyzed as an alternative row material for the paper mulberry (Broussonetia kazinoki) . The pulping and papermaing characteristics of bast fiber and whole stalks by three different pulping processes, conventional alkali, alkali-hydrogen peroxide, and sulfomethylated, for the Hanji were investigated. The fiber dimension of M.bombycis was the biggest of the species. The fiber length of upper part and the fiber width and cell wall thickness of lower part were bigger than the others. The extractives and ash contents of bast fiber were higher than those of whole stalk , and holocellulose and lignin contents of whole stalk were higher than those of bast fiber. The pulp yields of M.alba bast fiber, M.bombycis whole stalk, and sufomethylated pulping were higher than the others.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2006년도 PAN PACIFIC CONFERENCE vol.2
• /
• pp.285-290
• /
• 2006

As an alternative method to solve air pollution problem and difficulty of pulp bleaching of kraft pulping process, NaOH-Urea pulping was applied. The properties of NaOH-Urea pulp were compared to those of NaOH and kraft pulps. Addition of urea in low alkali charges retarded delignification rate compared to NaOH pulping. But, in high alkali application, delignification was significantly enhanced not from the addition of urea but from the high alkalinity. It was disclosed that urea did not participate on delignification reaction by the experiment using lignin model compound. Compared to paper strengths at the same level of sheet density, NaOH-Urea pulp gave as almost same breaking length and tensile index as those of kraft pulp. Especially tensile energy absorption and burst index were higher than those of kraft pulp.

• 펄프종이기술
• /
• 제38권3호
• /
• pp.47-60
• /
• 2006

This study was carried out to investigate the sheet formation properties of Morus Hanjis, made of bast and whole stalk pulps by different pulping methods, such as alkali, alkali-peroxide and sulfomethylated pulping. Two species of Morus, M. alba and M. lhou, were used. Effect of morphological properties of pulp stocks on the sheet formation and its gray levels based on optical property were evaluated using an Image analyzer. In addition, the effect of fiber distribution index(FDI) which was calculated from tile data of Confocal laser scanning microscopy(CLSM) on the sheet formation and optical properties of Morus Hanji were also discussed. On the sheet formation, Hanji from whole stalk pulp was superior than that of bast pulp. The more the sheet formation improved, the more paper opacity decreased. In the aspect of Hanji's surface characteristics analyzed by an Image analyzer, the average gray level and its standard deviation of Hanji from the whole stalk pulp were rather lower than those of bast pulp because of better sheet formation of the former. However, high brightness Hanji showed high value of gray level. The sheet formation and paper opacity were increased with the decrease of standard deviation of gray level. From these results, gray level measurement could be used to predict the paper opacity as well as sheet formation. Sheet formation of whole stalk Hanji and its FDI measured by CLSM were higher than those of bast fibers. In conclusion, the sheet formation and opacity of Hanji could be evaluated by standard deviation value of Hanji's gray level using an Image analyzer and by fiber distribution index using CLSM.

• 보존과학회지
• /
• 제5권1호
• /
• pp.3-10
• /
• 1996

In this study, bast fibers, woody parts and whole woods were pulped separately by alkali, alkali-hydrogen peroxide and sulfomethylated processes and their papermaking characteristics for the special Hanji were evaluated. Also properties of new Hanji products obtained from mixed stocks of various ratios were discussed. Solfomethylated pulps were shown higher brightness and sheet strengths than those from alkali and alkali-peroxide pulps. On the mechanical properties of Hanjis mixed with bast-and woody-parts pulps, and with bast and whole stem pulps, handsheet strengths were decreased with the increasing contents of woody and whole stem pulps. Various Hanjis could make by various mixing of separated cooked Pulps. Especially an excellant Hwaseonji(calligrapy Paper) could be made by one stage cooking of whole stem of paper mulberry by sulfomethylated pulping method.

• Journal of the Korean Wood Science and Technology
• /
• 제33권4호통권132호
• /
• pp.60-65
• /
• 2005

어저귀 한지의 발묵특성을 장 단섬유의 혼합비율에 따라 비교 검토하여 화선지로써의 적용 가능성을 검토하고자 하였다. 제조한 한지의 발묵특성을 검토한 결과, 인피펄프 단독으로 초지한 한지는 발묵상태가 매우 불량하여 화선지용으로는 적합하지 않은 것으로 나타났으며, 목질부 단독으로 초지한 한지의 발묵상태가 시판 화선지류보다도 훨씬 우수한 경향을 나타냈다. 강도적인 측면을 고려한다면 설포메틸 펄프화법으로 처리한 단섬유인 목질부 펄프를 60% 혼합한 어저귀 한지가 화선지용으로 적합하다고 사료된다. 펄프화 방법에 있어서도 설포메틸 펄프화법으로 초지한 한지의 발묵상태가 우수하였다. 이렇듯 한지의 발묵상태는 장섬유와 단섬유의 혼합량 및 지합과 밀접한 관련이 있다.

• Journal of the Korean Wood Science and Technology
• /
• 제32권1호
• /
• pp.1-8
• /
• 2004

생장속도가 빨라서 단위면적당 Biomass의 생산량이 많은 어저귀(Indian mallow, Abutilon avicennae G.)를 원료로 하여 펄프화하였으며, 제조한 한지의 물리적·기계적·현미경적 특성에 관하여 비교 검토하였다. 제조한 한지의 특성을 살펴보면 광학적, 강도적, 현미경적인 특성에서 설포메틸 펄프화법이 우수한 결과를 나타냈고, 장섬유인 인피부 펄프에 대한 단섬유인 목질부 펄프의 혼입량 증가에 따른 변화에 있어 지질(밀도, 백색도, 불투명도, 지합)의 변화는 점차 증가했으나, 강도는 감소하는 경향을 나타냈다.

• 보존과학회지
• /
• 제4권1호
• /
• pp.43-52
• /
• 1995

This study was carried out to investigate the papermaking characteristics for New Hanji (Korean Paper) products from paper mulberries by new pulping processes. So far wood ash extractives or NaOH only have been used for cooking chemicals at the atmospheric condition. Also bast fibers only have been used as raw materials for Hanji, In this study, as the alternatives to the conventional cooking, alkali, alkali-peroxide and sulfomethylated cookings were applied at the pressurized condition for Hanji pulping, Also bast fibers, woody parts and whole woods are attempting for being utilize as new raw materials for special Hanji. Anatomical and chemical properties of 3 paper mulberry species and their pulping characteristics were analyzed.