• 제목/요약/키워드: alignments

검색결과 285건 처리시간 0.033초

Development of 3-Dimensional Sight Distance Model for Highway Alignments (3차원 입체선형을 고려한 도로시거산정모형 개발에 관한 연구)

  • Park, Je-Jin;Choi, Joo-Yong;Ha, Tae-Jun
    • International Journal of Highway Engineering
    • /
    • 제10권1호
    • /
    • pp.1-9
    • /
    • 2008
  • Five bases for of highways are sight distance, vehicle stability, driver comfort, drainage and aesthetics. Among these bases, the sight distance is the most critical one in the highway alignment design. It is certain that highways and drivers' observation actions are 3-dimensional in nature. But, the highway alignment design and the sight distance analysis have been performed on 2-dimensional planes because of various constraints and complexity of calculating 3-dimensional sight distance. The purpose of this study is to derive a model for determining exact available sight distance in 3-D combined horizontal and vertical alignments. Application of the model is illustrated using numerical examples. The proposed model should be useful in quantifying the criteria for 3-D highway alignments.

  • PDF

Differences of Onset Timing Between Vastus Medialis and Lateralis during Knee Isometric Contraction on Individuals with Genu Varum or Valgum (안굽이 및 밖굽이 무릎을 가진 젊은 성인들에게서 등척성 운동 시 안쪽넓은근과가쪽넓은근의 근수축 개시시간 차이)

  • Park, Seol;Lee, Woo-Jin;Park, Ji-Won
    • The Journal of Korean Physical Therapy
    • /
    • 제26권1호
    • /
    • pp.9-14
    • /
    • 2014
  • Purpose: The purpose of this study was to investigate how different knee alignments (genu varum and genu valgum) affected activations of quadriceps muscles with measurements of onset-time differences between vastus medialis and vastus lateralis during isometric contractions at both 30 and 60 degree knee flexion. Methods: Fifty-two adults (20 genu varum, 12 genu valgum, and 20 control) were enrolled in this study. Subjects with over 4cm distance between knee medial epicondyles were assigned to Genu varum, while subjects with over 4cm distance between ankles medial malleolus were considered as genu valgum group. Surface EMG was used to measure onset time of both vastus medialis and vastus lateralis during isometric contraction at 30 and 60 degree knee flexion. Results: The onset time of vastus lateralis was delayed in genu varum group, and that of vastus medialis was delayed in genu valgum group at both 30 and 60 degree knee flexions. Moreover, onset time difference at $30^{\circ}$ knee flexion between muscles was larger in genu valgum group than genu varum group. Conclusion: Subjects with genu varum or valgum activated quadriceps muscles with different orders pending on flexion degrees. Therefore, when quadriceps training program were planned to prevent pain or deformities, the findings that quadriceps were activated with different orders affected by knee alignments and joint degree at which trainings were performed, must be considered. If the selective training programs of quadriceps femoris are planned to prevent pain or deformities due to poor knee alignments, these should consider the subject's knee alignment condition.

Incorporating Genetic Operators into Optimizing Highway Alignments (도로선형최적화를 위한 유전자 연산자의 적용)

  • Kim, Eung-Cheol
    • Journal of Korean Society of Transportation
    • /
    • 제22권2호
    • /
    • pp.43-54
    • /
    • 2004
  • This study analyzes characteristics and applicability of genetic algorithms and genetic operators to optimize highway alignments. Genetic algorithms, one of artificial intelligence techniques, are fast and efficient search algorithms for generating, evaluation and finding optimal highway alignment alternatives. The performance of genetic algorithms as an optimal search tool highly depends on genetic operators that are designed as a problem-specific. This study adopts low mutation operators(uniform mutation operator, straight mutation operator, non-uniform mutation operator whole non-uniform mutation operator) to explore whole search spaces, and four crossover operators(simple crossover operator, two-point crossover operator, arithmetic crossover operator, heuristic crossover operator) to exploit food characteristics of the best chromosome in previous generations. A case study and a sensitivity analysis have shown that the eight problem-specific operators developed for optimizing highway alignments enhance the search performance of genetic algorithms, and find good solutions(highway alignment alternatives). It has been also found that a mixed and well-combined use of mutation and crossover operators is very important to balance between pre-matured solutions when employing more crossover operators and more computation time when adopting more mutation operators.

Kinematic Analysis of The Rider Postural Alignments According to The Fitting of Stirrups Lengths during Horse Walk of High Level Rider (승마 평보 시 숙련자의 등자길이 피팅에 따른 기승자세정열의 운동학적 비교분석)

  • Ryew, Che-Cheong;Hyun, Seung-Hyun
    • Korean Journal of Applied Biomechanics
    • /
    • 제24권4호
    • /
    • pp.329-338
    • /
    • 2014
  • The purpose of this study was to analyze of the rider postural alignments according to the fitting of stirrups lengths during walk of high level riders. Participants selected as subject were consisted of horse riders of high level (age: $47.66{\pm}3.51yrs$, height: $168.40{\pm}4.84cm$, body weight: $73.36{\pm}15.58kg$, low extremity length: $94.76{\pm}3.98cm$, career: $23.33{\pm}5.77yrs$) and walk with 3 types of stirrup lengths(ratio of low extremity 68.04%, 73.25%, 78.48%). The variables analyzed were consisted of the displacement of Y axis (center of mass, head, thigh, shank and foot), FR angle, LR angle, dynamic postural stability index (DPSI), coefficient of variation (CV%), and distance (X axis) of low extremity limb between right and left. The displacement of Y axis in COM, thigh, shank, foot limbs were not statistically significant, but movements of head showed greater distance of B type and C type than that of A type during 1 stride of walk. The FR and LR angle in trunk of horse rider, dynamic postural stability index and, coefficient of variation didn't show significant difference statistically according to the fitting of stirrup lengths. Also the distance (X axis) of low extremity in thigh and shank didn't show significant difference statistically in between right and left, but right and left foot showed greater distance in C type than that of B and A types during walk in horse back riding. The hip and ankle joint angle not statistically significant according to stirrups lengths, But knee joint angle showed more extended according to the increase of stirrups lengths during stance and swing phase in walk.

Sequence based Intrusion Detection using Similarity Matching of the Multiple Sequence Alignments (다중서열정렬의 유사도 매칭을 이용한 순서기반 침입탐지)

  • Kim Yong-Min
    • Journal of the Korea Institute of Information Security & Cryptology
    • /
    • 제16권1호
    • /
    • pp.115-122
    • /
    • 2006
  • The most methods for intrusion detection are based on the misuse detection which accumulates hewn intrusion information and makes a decision of an attack against any behavior data. However it is very difficult to detect a new or modified aoack with only the collected patterns of attack behaviors. Therefore, if considering that the method of anomaly behavior detection actually has a high false detection rate, a new approach is required for very huge intrusion patterns based on sequence. The approach can improve a possibility for intrusion detection of known attacks as well as modified and unknown attacks in addition to the similarity measurement of intrusion patterns. This paper proposes a method which applies the multiple sequence alignments technique to the similarity matching of the sequence based intrusion patterns. It enables the statistical analysis of sequence patterns and can be implemented easily. Also, the method reduces the number of detection alerts and false detection for attacks according to the changes of a sequence size.

Quasi-classical Trajectory Calculation of the Chemical Reactions Ba+C6H5Br, m-C6H4CH3Br

  • Xia, Wenwen;Liu, Yonglu;Zhong, Haiyang;Yao, Li
    • Bulletin of the Korean Chemical Society
    • /
    • 제33권2호
    • /
    • pp.589-596
    • /
    • 2012
  • In this paper, the reactive dynamics properties of the reactions Ba + $C_6H_5Br$ and Ba + m-$C_6H_4CH_3Br$ were studied by means of the quasi-classical trajectory method based on the London-Eyring-Polanyi-Sato potential energy surfaces. The vibrational distributions, reaction cross sections, rotational alignments of the products BaBr all were obtained. The peak values of the vibrational distributions are located at $\nu$ = 0 for the reactions Ba + $C_6H_5Br$ and Ba + m-$C_6H_4CH_3Br$ when the collision energies are 1.09 and 1.10 eV, respectively. The reaction cross sections increase with the increasing collision energy, which changes from 0.6 to 1.5 eV. The product rotational alignments deviate from -0.5 and firstly increase and then decrease while the collision energy is increasing, just like that of Heavy+Light-Light system.

Development of a Fast Alignment Method of Micro-Optic Parts Using Multi Dimension Vision and Optical Feedback

  • Han, Seung-Hyun;Kim, Jin-Oh;Park, Joong-Wan;Kim, Jong-Han
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 제어로봇시스템학회 2003년도 ICCAS
    • /
    • pp.273-277
    • /
    • 2003
  • A general process of electronic assembly is composed of a series of geometric alignments and bonding/screwing processes. After assembly, the function is tested in a following process of inspection. However, assembly of micro-optic devices requires both processes to be performed in equipment. Coarse geometric alignment is made by using vision and optical function is improved by the following fine motion based on feedback of tunable laser interferometer. The general system is composed of a precision robot system for 3D assembly, a 3D vision guided system for geometric alignment and an optical feedback system with a tunable laser. In this study, we propose a new fast alignment algorithm of micro-optic devices for both of visual and optical alignments. The main goal is to find a fastest alignment process and algorithms with state-of-the-art technology. We propose a new approach with an optimal sequence of processes, a visual alignment algorithm and a search algorithm for an optimal optical alignment. A system is designed to show the effectiveness and efficiency of the proposed method.

  • PDF

Intrinsic alignments of emission line galaxies at z ~1.4 from the FastSound redshift survey

  • Tonegawa, Motonari;Okumura, Teppei;Totani, Tomonori;Dalton, Gavin;Yabe, Kiyoto
    • The Bulletin of The Korean Astronomical Society
    • /
    • 제42권2호
    • /
    • pp.54.1-54.1
    • /
    • 2017
  • Intrinsic alignments (IA), the coherent alignment of intrinsic galaxy orientations, can be a source of a systematic error of weak lensing surveys. The redshift evolution of IA also contains information about the physics of galaxy formation and evolution. We present the first measurement of IA at high redshift, z~1.4, using the spectroscopic catalog of blue star-forming galaxies of the FastSound redshift survey, with the galaxy shape information from the Canada-Hawaii-France telescope lensing survey. The IA signal is consistent with zero with power-law amplitudes fitted to the projected correlation functions for density-shape and shape-shape correlation components, $A_{\delta+}=-0.0040\pm 0.0754$ and $A_{++}=-0.0159\pm 0.0271$, respectively. These results are consistent with those obtained from blue galaxies at lower redshifts (e.g., $A_{\delta+}=0.0035_{-0.0389}^{+0.0387}$ and $A_{++}=0.0045_{-0.0168}^{+0.0166}$ at z=0.51 from the WiggleZ survey), suggesting no strong redshift evolution of IA. The upper limit of the constrained IA amplitude corresponds to a few percent contamination to the weak-lensing shear power spectrum, resulting in systematic uncertainties on the cosmological parameter estimations by $-0.035<\Delta \sigma_8<0.026$ and $-0.025<\Delta \Omega_{\mathrm m}<0.019$.

  • PDF