• 대한기계학회논문집A
• /
• 제25권6호
• /
• pp.923-929
• /
• 2001

Steering system is most important for vehicle in safety and driving feel. However, testing using real car to improve steering feel is often difficult in aspect to repeatability, safety and money. Repeatability in testing steering system is very important because steering feel for driver is variable according to the environment condition. And steering testing of vehicle is so dangerous that driver may not concentrate in testing. In this paper, the steering system simulator using front part of steering and suspension system was developed. We can test the electric power steering system for the light weight vehicle using this simulator cheap, safely and repeatably.

• Journal of the Korean Physical Society
• /
• 제73권10호
• /
• pp.1561-1565
• /
• 2018

The dielectric properties of the uniaxial relaxor ferroelectric $Sr_xBa_{1-x}Nb_2O_6$ with x = 0.75 were investigated along the polar [001] direction as a function of temperature. The capacitance maximum showed the frequency dispersion commonly observed in relaxors. Additional weak dielectric anomalies were observed in the paraelectric phase; they were only seen during the heating process and disappeared upon subsequent cooling. These were attributed to the existence of large polar clusters strongly pinned at defects and/or to random fields and their metastable characters. Aligning the ferroelectric domains along the polar axis at room temperature removed the high-temperature dielectric anomalies. The dependences of the capacitance and the dielectric maximum temperature on the magnitude of the poling field were investigated.

• 한국광학회지
• /
• 제12권5호
• /
• pp.414-417
• /
• 2001

Experimentally, the aligned direction of AFLCs in electro-optic cells having both the substrates rubbed along the same direction is skewed by a few degrees from the rebbing direction. To explain why, we proposed "Torsional Rigid Body Model" and interpreted their skewing angle as the action of short pitch with the large shear stress. That is, the azimuthal an anchoring strength (about 35 dyn/cm) in the cell is much larger than the maximum shear stress (about 10$^{-6}$ dyn/cm) for the original pitch and so forbids the optic axis to skew. On the side hand, the strength is smaller than the maximum shear stress (about 42 dyn/cm) for short pitch and then allows the optic axis to skew.

• 전력전자학회논문지
• /
• 제26권5호
• /
• pp.307-314
• /
• 2021

Even though the LCL filters have superior harmonic attenuation ability to L filters, stability has always been an issue. The system could be unstable because of the resonance phenomenon, especially when digital controller is used. Adding a notch filter to the compensator is one approach to solve the problem. Resonance phenomenon can be inhibited by aligning notch frequency to system resonance frequency. However, resonance frequency variation can be obtained because the actual system has a nonstationary characteristic. Therefore, the system could be unstable, where the system parameters are changed when the conventional notch filter is used. An adaptive digital notch filter that stabilizes the system even system parameters are changed. Simulation and experiment results are provided to verify the validity of the proposed adaptive filter.

• Computers and Concrete
• /
• 제23권5호
• /
• pp.311-320
• /
• 2019

The substructuring technique is one of the efficient methods for reducing computational effort and memory usage in the finite element method, especially in large-scale structures. Proper mesh partitioning plays a key role in the efficiency of the technique. In this study, new algorithms are proposed for mesh partitioning based on an element search technique. The computational cost function is optimized by aligning each element of the structure to a proper substructure. The genetic algorithm is employed to minimize the boundary nodes of the substructures. Since the boundary nodes have a vital performance on the mesh partitioning, different strategies are proposed for the few number of substructures and higher number ones. The mesh partitioning is optimized considering both computational and memory requirements. The efficiency and robustness of the proposed algorithms is demonstrated in numerous examples for different size of substructures.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제12권11호
• /
• pp.5304-5322
• /
• 2018

Since designing a feedback topology is a practical way to implement interference alignment at reduced cost of channel state information (CSI) feedback, six feedback topologies have been presented in prior works for a K-user multiple-input multiple-output interference channel. To fully reveal the potential benefits of the feedback topology in terms of the saving of CSI overhead, we propose a new feedback topology in this paper. By efficiently performing dimensionality-decreasing at the transmitter side and aligning interference signals at a subset of receivers, we show that the proposed feedback topology obtains substantial reduction of feedback cost over the existing six feedback designs under the same antenna configuration.

• 대한치과의사협회지
• /
• 제57권6호
• /
• pp.333-343
• /
• 2019

Many orthodontists face difficulties in aligning incisors in an esthetically critical position, because the individual perception of beauty fluctuates with time and trend. Temporary anchorage device (TAD) can aid in attaining this critical incisor position, which determines an attractive smile, the amount of incisor display, and lip contour. Borderline cases can be treated without extraction and the capricious minds of patients can be satisfied with regard to the incisor position through whole dentition distalization using TAD. Mild to moderate bimaxillary protrusion cases can be treated with TAD-driven en masse retraction without premolar extraction. Patients with Angle's Class III malocclusion can be the biggest beneficiaries because both sufficient maxillary incisal display, through intrusion of mandibular incisors, and distalization of the mandibular dentition are successfully achieved. In addition, TAD can be used to correct various other malocclusions, such as canting of the occlusal plane and dental/alveolus asymmetry.

• 전자통신동향분석
• /
• 제36권4호
• /
• pp.1-12
• /
• 2021

The competition to lead the next generation of mobile technologies, 6G, is underway while the deployment of 5G has not been implemented worldwide. ITU-R plans to develop technical requirements and standards after completing the 6G Vision by 2023. It can be considered too early to have a concrete view of the 6G core network architecture from this timeline. However, major stakeholders have started making their presence felt by publishing their views. From updated analysis on the technology and service trends proposed, we present a list of research directions on 6G core network from several perspectives: distribution of network functions to nearer edge locations; future fixed-mobile convergence, including low earth orbit satellites; highly-precise QoS guarantee; supporting an extremely wide variety of service requirements; AI-native automation and intelligence; and aligning with the evolution of radio access network.

• 식품과학과 산업
• /
• 제54권4호
• /
• pp.246-259
• /
• 2021

Various countries established Geographical Indication (GI) system to protect the right and traditionality of their native products. The regulations vary by country but can be divided accordingly: Protection by trademark systems such as in USA, Special Protection for Geographical Indication as in EU, Protection by both schemes as in China and Korea. Within the systems, countries provide diverse schemes such as PDO and PGI in EU depending on the scope of the product. However, GI system in Korea provides one definition which only protects products that express definite tie to its territory of origin, preliminary with the origin of the ingredient. It is necessary for the government and industry to seek ways to revitalize the local economy in the global market and increase the number of GI products by aligning GI systems with foreign countries and support mutual bilateral agreement.

• 국제학술발표논문집
• /
• The 6th International Conference on Construction Engineering and Project Management
• /
• pp.573-577
• /
• 2015

Safety is paramount for construction industry throughout the world. Human errors which contribute to more than half of construction accidents, could be proactively prevented through effective education and training methods. Although Virtual Reality (VR) and Augmented Reality (AR) have gained much attention in various disciplines, few studies applied them for construction safety education. This research presents a new approach in construction safety education by utilizing VR and AR. The vision of aligning teaching & learning strategies is examined in order to ensure the potential benefits of the new method. This innovative approach shifts safety education from "Listen, and I will forget. See, and I may remember" towards "Practice, and I understand".