• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.15 no.5
• /
• pp.419-422
• /
• 2002

We studied the nematic liquid crystal (NLC) aligning capabilities using the new alignment material of a diamond like carbon (DLC) thin film. A high pretilt angle of about $3.5^{\circ}$ by ion beam(IB) exposure on the DLC thin film surface was measured. A good LC alignment by the IB alignment method on the DLC thin film surface was observed at annealing temperature of $200^{\circ}C$, and the alignment defect of the NLC was observed above annealing temperature of $220^{\circ}C$. Consequently, the high NLC pretilt angle and the good thermal stability of LC alignment by the IB alignment method on the DLC thin film surface can be achieved.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.13 no.2
• /
• pp.157-162
• /
• 2000

The electro-optical characteristics of TN(twisted nematic)-LCD(liquid crystal display) with photo-dimerized on a PMCh(poly(4'methacryoyloxylchalcone)) surface using a new photo-dimerization method was studied. The excellent voltage-transmittance(V-T) curve of TN-LCD with photo-dimerized on a PNCh surface for 1 min. using a new photo-dimerization method was observed. Also, the voltage-hold-ing-ratio(VHR) of TN-LCD with photo-dimerized on a PMCh surface using a new photo-dimerization method is higher than that of conventional photo-dimerization method. Consequently, we suggest that the new photo-dimerization method. Consequently, we suggest that the new photo-dimerization method for LC aligning is the most promising rubbing-free techniques.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2017.10a
• /
• pp.127-128
• /
• 2017

Firstly, medial rotation and lateral rotation is when moving a hand inward and outward, while raising a hand with the elbow parallelizing to body, while the shoulder aligning with the body. We would like to identify treatments when either medial rotation or lateral rotation causes pain, or when the rotation lacks of measurement angle, when measured.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.396-396
• /
• 2007

We investigated the liquid crystal (LC) aligning capabilities and electrooptical characteristics of semi-transparent silver paste electrodes substituting indium tin oxide (ITO) electrodes. Experimental results show that a uniform vertical LC alignment and a large pretilt angle were achieved using the semi-transparent silver paste. The vertical alignment mode based on the semi-transparent silver paste electrodes showed appropriate electro-optical characteristics and a high transparency in comparison with that based on the ITO electrodes. These results indicate that the semi-transparent silver paste electrodes of liquid crystal displays could substitute the ITO electrodes.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.65 no.3
• /
• pp.224-234
• /
• 2016

This study developed the conductivity pattern of solid surface using laser direct pattern and compound polymer material technology. For development direct patterning system of solid surface, we used the laser power stabilizer, the dynamic focusing, 3D scanner S/W and the auto aligning techniques. Also For conductivity pattern, we are developed compound polymer material with additive by electro-less plating. These technologies are already used commercially. However operation and control integrated system for direct patterning of solid surface are not yet developed. The objective of this paper is to introduce the laser direct structuring for simple process improvement instead complex PCB process, and develop the operating stability and integration system. Also we implemented new application of laser direct structuring through sample manufacture.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.11a
• /
• pp.80-83
• /
• 2003

We have investigated the generation of pretilt angle for a nematic liquid crystal (NLC) alignment with in-situ photoalignment method on polyimide (PI) surfaces using thin plastic substrates. The LC aligning capabilities and pretilt angle of the thin plastic substrates by in-situ photoalignment method were better than that of the glass substrate by general photoalignment. Also, the LC pretilt angle increased with increasing healing temperature and exposure time.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.11a
• /
• pp.502-505
• /
• 2003

We synthesized high thermal photoalignment material with hydroxyl aromatic polyimide, and studied the liquid crystal (LC) aligning capabilities on the photopolymer layers. Also, electro-optical (EO) performances for the twisted-nematic (TN)-liquid crystal display (LCD) photoaligned with linearly polarized UV exposure were investigated. A good LC alignment with UV exposure on the photopolymer surface can be obtained. However, the low pretilt angles were obtained below $1^{\circ}$. The Voltage-transmittance (V-T) curve without backflow bounce in the photoaligned TN cell with UV exposure was observed. The response time of photoaligned TN cell was measured about 24 ms.

• Journal of the Korean Society for Precision Engineering
• /
• v.30 no.1
• /
• pp.105-112
• /
• 2013

This paper presents the structural design and finite element analysis of precision stage based on a double triangular parallel mechanism for precision positioning and large force generation. Recently, with the acceleration of miniaturization in mobile appliances, the demand for precision aligning and bonding has been increasing. Such processes require both high precision and large force generation, which are difficult to obtain simultaneously. This study aimed at constructing a precision stage that has high precision, long stroke, and large force generation. Actuators were tactically placed and flexure hinges were carefully designed by optimization process to constitute a parallel mechanism with a double triangular configuration. The three actuators in the inner triangle function as an in-plane positioner, whereas the three actuators in the outer triangle as an out-of-plane positioner. Finite element analysis is performed to validate load carrying performances of the developed precision stage.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.10a
• /
• pp.882-884
• /
• 2005

A new rectangular shape microlens array having high sag for solid-state lighting is presented. Proposed microlens, which has high sag, over $375{\mu}m$ and large diameter, over 3 mm can enormously enhance output optical extraction efficiency. Rectangular shape of microlens can maximize the fill factor of light-emitting-diode (LED) package and minimize the optical loss at the same time. This wafer level microlens array is fabricated on LED package. It has many advantages in optical properties, low cost, high aligning accuracy, and mass production.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.10a
• /
• pp.390-393
• /
• 2005

he FPCs(Flexible Printed Circuit) are currently used in several electronic products like digital cameras, cellular phones because of flexible material characteristics. Because the FPC is usually small size and flexible, only one FPC should not enter chip mounting process, instead, several FPCs is placed on the large rigid pallette and go to the chip mounting process. Currently the job of mounting FPC on the pallette is carried by totally manual way. Thus, the goals of the research is develop the automatic machine of FPC mounting on pallette using vision alignment. The procedure of operating machine is firstly to measure alignment error of FPC, correct alignment errors, and finally mount well-aligned FPC on the pallette. The vision technology is used to measure alignment error accurately, and precision motion control is used in correcting errors nd mounting FPC. The two picker heads handling two FPC together is used to increase the productivity.