• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.16 no.3 s.108
• /
• pp.247-254
• /
• 2006

This paper (Part II) provides the application results of the method presented in a companion paper (Part I) where the dynamic equation for rotating polar orthotropic disk is formulated and its solution method is considered. The natural frequencies and critical speed of polycarbonate CD are calculated to validate the present method and are shown to by very accurate. The critical speeds of typical GFRP and CFRP CD's are computed by aligning the fibers in radial and circumferential directions. The radially reinforced CFRP CD is shown to have the five times higher critical speed than that of the polycarbonate CD. The natural frequencies and critical speeds of disks with various elastic modulus ratios are obtained. The results show that the radially reinforced disk is more effective in increasing critical speed than the circumferentially reinforced disk.

• Communications for Statistical Applications and Methods
• /
• v.27 no.3
• /
• pp.269-284
• /
• 2020

This study compares two teaching methods in an introductory statistics course at a large state university. The first method is the traditional lecture-based approach. The second method implements a flipped classroom that incorporates the recommendations of the American Statistical Association's Guidelines for Assessment and Instruction in Statistics Education (GAISE) College Report. We compare these two methods, based on student performance, illustrate the procedures of the flipped pedagogy, and discuss the impact of aligning our course to current guidelines for teaching statistics at the college level. Results show that students in the flipped class performed better than students in traditional delivery. Student questionnaire responses also indicate that students in flipped delivery aligned with the GAISE recommendations have built a productive mindset in statistics.

• Korea Journal of Hospital Management
• /
• v.12 no.2
• /
• pp.93-111
• /
• 2007

The thrust in this paper is to discuss the dimensions of executive scanning process (ESP) that support continuous scanning activities by executives. Executive scanning is especially important for the healthcare organizations in these days since the environment they are faced with is extremely complex and dynamic. While much has been written about ESP, two important aspects have been underemphasized in the past. The first is a link to the strategic management process (SMP) or the issue of strategy-scanning alignment. The second is a feedback loop to verify the quality of information generated through scanning process. This paper discusses the improved ESP by adding these two features.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.18 no.2
• /
• pp.207-213
• /
• 2009

The bundling process is the final step in vegetable manufacturing, however, the process is a little difficult to be automatized, because vegetable has the physical properties of roughness, softness, and fragility etc. In this paper, we proposed an automatic bundling mechanism for vegetable based on the heat melt sticking. The proposed mechanism consists of three modules, one module is the moving part for aligning of the vegetable shape and adjusting of the vegetable tension, second module is the arm driving part for the vegetable binding and the band roll releasing, and third module is band joining, band cutting, and band feeding part for the vegetable binding continuously. Through this research, Using the SMO(SimDesigner Motion) module, we optimize condition of mechanical movement of the bundling mechanism. This bundling system designed in order to binding 288 bundle/hour.

• Asian Journal of Business Environment
• /
• v.5 no.2
• /
• pp.23-29
• /
• 2015

Purpose - This theoretical study develops practical recommendations for implementing a quality management system (QMS) in Kazakh organizations to ensure the effectiveness and safety of products and services. We discuss the improvement of Kazakhstan's quality standards based on the requirements of ISO 9000. Research design, data, and methodology - We provide methods for improving the quality standards system, ranging from research and development to the sale of products. We also propose to establish a special quality systems award to motivate enterprises toward product quality improvement. The study's methodological basis included Kazakhstan's legislative and regulatory Acts, and international and national standards defining QMS requirements for scientists worldwide to develop and implement a QMS for enterprises. Results - Aligning the QMS reduces Kazakh companies' costs for the detection and correction of defects, and the external and internal loss caused by the defects. Effective QMS also reduces management costs. Conclusion - This article can help increase the transparency of organizations for their leaders and (if necessary) the external environment, and improve the accuracy, quality, and timeliness of decision-making.

• Asian-Australasian Journal of Animal Sciences
• /
• v.14 no.11
• /
• pp.1628-1633
• /
• 2001

A goat ${\beta}$-casein gene was cloned and sequenced. Our previous study had determined the nucleotide sequences of the 5' flanking region and the structural gene including all 9 exons. In the present study, investigations were done on the regulatory sequences in the 5' flanking region of the goat ${\beta}$-casein gene by aligning and comparing it with the same gene from other mammals. The results showed that -200/-1 bp of the 5' flanking sequences contained six conserved clusters, in which the sites of gene expression regulated by the transcription factor and hormone might exist. It showed that fourteen glucocorticoid receptor elements, two cAMP responsive elements, two SV40 virus enhancer core sequences, two OCT-1 binding elements and one CTF/NF-1 binding element were dispersed in the 5' flanking region of goat ${\beta}$-casein gene. Our findings are perhaps valuable for the elucidation of the molecular mechanisms that control the expression of the goat ${\beta}$-casein gene.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.7 no.3 s.18
• /
• pp.30-37
• /
• 2004

For a proper operation of portable air defense IR terminal homing missile to the rapid intruding target, the boresight of an IR seeker of the missile should be accurately aligned with the gunner's aiming sight. Before a gunner fires the missile, he tries to keep the target within the circle of ASU ensuring the seeker to lock on the target correctly. In this paper, using an electrical seeker caging loop and IR detector signal characteristics, a precise aligning method between the seeker boresight and the LOS(Line of Sight) of ASU(Aiming Sight Unit) was studied. Although every seeker has slightly different SLA (Signal of Look Angle) output, we can get negligible alignment error through a fine tuning method of electrical caging signal. This alignment procedure was also adopted in K-PSAM system.

• Proceedings of the KSME Conference
• /
• 2000.11a
• /
• pp.559-563
• /
• 2000

In this paper we describe a method for aligning a robot gripper using image information. The region of gripper is represented from HSI color model that has major advantage of brightness independence. In order to extract the feature points for vision based position control, we find the corners of gripper shape using polygonal approximation method which determines the segment size and curvature of each points. We apply the vision based scheme to the task of alignment of gripper to reach the desired position by 2 RGB cameras. Experiments are carried out to exhibit the effectiveness of vision based control using feature points from polygonal approximation of gripper.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2002.08a
• /
• pp.655-657
• /
• 2002

The carbon nanotube emitters for field emission displays were fabricated by screen printing techniques. The pastes for screen printing are composed of organic binders, carbon nanotubes, and some additive materials. Then the pastes were printed on Cr-coated/Ag-printed soda-lime glass substrates. From the I-V characteristics, the turn-on field of SWNT was lower than that of MWNT. The decrease in the mesh size of screen masks resulted in decreasing the turn-on field and increasing the electron emission current. When the carbon nanotubes were mixed with glass frit, glass frit appeared to contribute to the vertically aligning of carbon nanotubes on glass.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2002.08a
• /
• pp.508-510
• /
• 2002

We studied the liquid crystal (LC) alignment capabilities and the generation of pretilt angles with ion beam exposure on a diamond like carbon (DLC) layer. A high pretilt angle of 3.5$^{\circ}$ with ion beam exposure on the DLC layer can be obtained. A high pretilt angle in NLC by ion beam alignment method on the DLC layer can be achieved.