• Journal of Korean Society of Water and Wastewater
• /
• v.23 no.2
• /
• pp.175-180
• /
• 2009

This study was conducted to improve biological degradation efficiency of toluene as a model volatile organic compound (VOC) using yeast Candida tropicalis and to suggest an effective method for bioreactor operation. The yeast strain was immobilized with polyethylene glycol (PEG), alginate, and powdered activated carbon (PAC). The yeast-immobilized polymer media were used as fluidized materials in an airlift bioreactor. Polymer media without PAC were also made and operated in another airlift bioreactor. The two bioreactors showed toluene removal efficiencies ranging 80-96% at loading rates of $10-35 g/m^3-hr$, and the bioreactor containing the polymer media with PAC achieved higher removal efficiency. Protein contents in the liquid phase showed that the bioreactor using the yeast-immobilized polymer media with PAC had a higher rate of microbial growth initially than that without PAC. In addition, the microbial growth rate inside of the polymer media with PAC was five times higher than that without PAC. Consequently, the polymer media containing the yeast strain and PAC could enhance removal efficiencies for VOCs, and the immobilization method improve microbial activity and stability for a long-term operation of biological systems.

• KSBB Journal
• /
• v.14 no.5
• /
• pp.534-538
• /
• 1999

For the optimization of operating conditions for plant cell suspension culture in bioreactors, effects of bioreactor types, various kinds of impellers, and aeration rates were examined using Nicotiana tabacum cells as a model system. Stirred tank bioreactor and airlift bioreactor were used for the comparison of bioreactor type. Growth rates in both bioreactors were lower than in shake flasks. In terms of final cell concentration, stirred tank bioreactor supported a little bit better growth compared to airlift bioreactor. Impeller type did not affect cell growth significantly, but it was apparent that cell size index decreased in the case of using hollowed paddle impeller. When the aeration rate was maintained at 0.3 vvm, cell growth was the best. At above 1.0 vvm, growth inhibition as well a browning was noticed. In addition, it was found that cell size index reduced proportionally to the increased of aeration rate.

• Journal of Korean Society of Environmental Engineers
• /
• v.31 no.8
• /
• pp.603-610
• /
• 2009

This research was performed to improve removal efficiency of toluene and methyl ethyl ketone (MEK) using Candida tropicalis, one of the yeast species. An airlift loop bioreactor (ALB) was employed to enhance the capability of mass transfer for toluene and MEK from the gas phase to the liquid, microbial phase. Polymer gel media made from PAC, alginate and PEG was applied for the effective immobilization of the yeast strain on the polymer gel media. The experimental results indicated that the mass transfer coefficient of toluene without polymer gel media was 1.29 $min^{-1}$ at a gas retention time of 15 sec, whereas the KLa value for toluene was increased to 4.07 $min^{-1}$ by adding the media, confirming the enhanced mass transfer of volatile organic compounds between the gas and liquid phases. The removal efficiency of toluene and MEK by using yeast-immobilized polymer gel media in the ALB was greater than 80% at different pollutant loading rates (5, 10, 19 and 37 g/$m^3$/hr for toluene, 4.5, 8.9, 17.8 and 35.1 g/$m^3$/hr for MEK). In addition, an elimination capacity test conducted by changing inlet loading rates stepwise demonstrated that maximum elimination capacities for toluene and MEK were 70.4 and 56.4 g/$m^3$/hr, respectively.

• KSBB Journal
• /
• v.14 no.4
• /
• pp.440-444
• /
• 1999

For the effecient production of clavulanic acid., a mutant strain Streptomyces clavuligerus KK was selected from Streptomyces clavuligerus ATCC 27064 through mutation with NTG. S. clavuligerus ATCC 27064 produced about 200 mg/L of calvulanic acid when the medium was composed of 1%(W/V) glycerol, 1.5%(W/V) soybean flour, 0.1%(W/V) $KH_2PO_4$, 0.2%(V/V) soybean oil. A selected mutant, S. clavuligerus KK, produced about 1150 mg/L of clavulanic acid in the same medium. After the addition of $MgSO_4$ to the basal medium, S. clavuligerus KK produced about 1550 mg/L of clavulanic acid, with shows about 1.3 times higher than that produced in the basal medium. In order to select the proper bioreactor for the production of clavulanic acid, a batch culture was performed in an airlift, a bubble column and an stirred tank bioreactors. In an airlift bioreactor, about 1350 mg/L of clavulanic acid was produced, in a bubble column bioreactor, about 1550 mg/L, in a stirred tank bioreactor, about 2200 mg/L, respectively. The production of clavulanic acid in stirred tank bioreactor was about 50% higer than that by an airlift and a bubble column bioreactors. According to this result, the stirred tank bioreactor was selected as a proper bioreactor.

• Journal of Environmental Science International
• /
• v.8 no.4
• /
• pp.479-483
• /
• 1999

Nitrifier consortium immobilized in polyvinyl alcohol was used for the removal of ammonia nitrogen from synthetic aquaculture water in the airlift bioreactor. At the aeration rate fo 0.15 vvm and bead packing volume fraction of 20%, airlift bioreactor was operated effectively for a removal of ammonia nitrogen and for a stability of operation. Ammonia nitrogen removal rate by airlift bioreactor was continuously increased with decreasing hydraulic residence time. At the HRT(hydraulic residence time) of 0.3 hour, ammonia nitrogen removal rate was 84.3 g/$m^3$.d and the highest ammonia nitrogen removal rate was 130.8 g/$m^3$.d when HRT was 0.1 hour.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.6 no.1
• /
• pp.72-74
• /
• 2001

Transgenic Nicotiana tabacum cells were cultivated for the production of murine granulocyte macrophage-colony stimulating factor (mGM-CSF) in both a stirred tank bioreactor and an airlift bioreactor with draft tube. Cell growth and mGM-CSF production in the airlift bioreactor were found to be better than those achieved in the stirred tank bioreactor. In the airlift bioreactor, 9.0g/L of cells and 2.2ng/mL of mGM-CSF were obtained (11.0g/L and 2.4ng/mL, respectively in shake flasks). Although the lag period was prolonged and mGM-CSF production was lowered by 33% in the stirred thank bioreactor as compared to the control culture, the maximum cell density was increased up to 12.0g/L due to better mixing by agitation at the higher cell density.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.36 no.6
• /
• pp.661-668
• /
• 2003

Performance of an airlift bioreactor (ABR) containing the immobilized microorganisms was evaluated in an integrated pilot scale recirculating aquaculture system stocked with Nile tilapia (Oreochromis niloticus) at an initial rearing density of $5\%$ and compared to a rotating biological contactor (RBC) for 40 days. The TAN concentration of rearing tank for ABR and RBC were maintained at $0.4\;g/m^3$ and $0.5\;g/m^3,$ respectively, The nitrite nitrogen was completely removed by the ABR. The ABR's aeration was more stable than the RBC's. On the whole, the feasibility of ABR as an aquacultural water treatment unit was recognized.

• Plant Resources
• /
• v.3 no.3
• /
• pp.219-222
• /
• 2000

For the purpose of establishing an efficient propagation through airlift bioreactor system of Zingiber of officinale Rosc. Korean native Seosanjong, the effect of different factors and bioreactor on cultured plantlets were investigated. The highest number of plantlets, fresh weight per plant was obtained from explants when cultured in MS liquid medium including 0.3 mg/L NAA and 2.0 mg/L kinetin for 40 days. A 10 L bottle type bubble bioreactor, compared with 250 mL Erlenmeyer flask, was more efficient, producing 4.7 plantlets or from 1.5 to 1.6 times more than did the Erlenmeyer flask. The results demonstrate the rapid mass propagation of airlift bioreactor to produce normal ginger.

• Journal of Plant Biotechnology
• /
• v.3 no.1
• /
• pp.1-5
• /
• 2001

Traditional culture technology of medicinal plants mainly depends on the field culture, which has many problems. With progress of modern culture technology, it has become possible to produce valuable secondary metabolites from medicinal plants. In this paper, we discuss about the pigment and saikosaponin production from too medicinal plants, Carthamus tinctorius and Bupleurum falcatum, through bioreactor culture system. A two-stage bioreactor culture system was established for the production of yellow and red pigments and saikosaponins by cell suspension cultures of Carthamus tinctorius and Bupleurum falcatum. In Carthamus tinctorius, balloon type airlift bioreactors and column type airlift bioreactors were employed for the tell culture and for the pigment production, respectively. The greatest pigment production was obtained on White medium supplemented with 4 mg/L kinetin, high levels of sucrose concentration and photosynthetic photon flux. In Bupleurum falcatum, adventitious roots were cultured in balloon type airlift bioreactors and the root growth was greatest on SH medium containing 5 mg/L IBA and 0.2 mg/L kinetin. HPLC analysis showed that the contents of main active saikosaponins a, c, and d in adventitious roots were almost the same as those in field cultured root.

• Journal of Microbiology and Biotechnology
• /
• v.17 no.7
• /
• pp.1071-1078
• /
• 2007

Using a 50-1 airlift bioreactor, for the effective production of tylosin from Streptomyces fradiae TM-224 using raw cornmeal as the energy source, various environmental factors were studied in flask cultures. The maximum tylosin concentration was obtained at $32^{\circ}C$ and pH between 7.0 and 7.5. When seed was inoculated after 24 h of culture, the maximum tylosin concentration, 5.7 g/l, was obtained after 4 days of culture. Various concentrations of raw cornmeal were tested to investigate the optimum initial concentration for the tylosin production. An initial raw cornmeal concentration of 80 g/l gave the highest tylosin concentration, 5.8 g/l, after 5 days of culture. Of the various nitrogen sources, soybean meal and fish meal were found to be the most effective for the production of tylosin. In particular, with the optimal mixing ratio, 12 g/l of soybean meal to 14 g/l of fish meal, 7.2 g/l of tylosin was obtained after 5 days of culture. To compare raw cornmeal and glucose for the production of tylosin in the 50-1 airlift bioreactor for 10 days, fed-batch cultures were carried out under the optimum culture conditions. When raw com meal was used as the energy source, the tylosin production increased with increasing culture time. The maximum tylosin concentration after 10 days of culture was 13.5 g/l, with a product yield from raw cornmeal of 0.123 g/g of consumed carbon source, which was about 7.2 times higher than that obtained when glucose was used as the carbon source.