• 한국항공우주학회지
• /
• 제38권3호
• /
• pp.207-212
• /
• 2010

본 논문에서는 고정익 무인항공기의 그물망 자동착륙을 위한 나선형 강하궤적과 종말 유도기법을 설계하였다. 시야가 확보된 좁은 지역에서 착륙하도록 고정익 항공기의 나선형 강하궤적을 설계하였고, 나선형 강하의 끝점에서 그물망 입사방향을 향하도록 비행경로각 명령을 생성하였다. 종말유도 단계에서는 그물망 중심으로의 정밀한 유도를 위하여 시선각 정보 기반 의사추적 유도기법을 설계하였다. 고정익 무인항공기의 시스템 인식 모델을 이용한 6자유도 수치 시뮬레이션을 수행하여 제안한 나선형 착륙비행의 성능을 검증하였다.

• 제어로봇시스템학회논문지
• /
• 제14권7호
• /
• pp.629-634
• /
• 2008

This paper presents the flight test procedure and the results for the airspeed indicator calibration of a light airplane the name of ChangGong-91, which is the first type certified aircraft from Korean Ministry of Construction and Transportation, as a part of the flight test validation to get the certification. The flight tests for airspeed position error calibrations are conducted using tower fly by method in order to calibrate swivel head testboom which is attached to the right wing tip of the airplane. Also system to system method is applied in order to calibrate the airspeed indicator of the cockpit. The flight test is conducted at the basis of the 'Korean Airworthiness Standard' which is the regulation of Korean Ministry of Construction and Transportation. The airspeed error range for the testboom and the airspeed indicator are determined to $-0.75{\sim}+0.75$ knot and to $-4.0{\sim}+2.0$ knots, respectively. The calibration results are applied to ChangGong-91 Flight Operation Manual.

• 항공우주산업기술동향
• /
• 제6권2호
• /
• pp.133-142
• /
• 2008

헬기 시장진입 가능성을 수요측면, 산업구조측면, 인프라측면에서 검토하였다. 검토 결과 일부 부족기술의 확보와 금융과 헬기 관련 제도 등을 보완하면 내수를 중심으로 진입이 가능하다는 결론을 도출하였다. 헬기산업의 성장동력화를 위한 추진전략을 제시하고 전략 달성을 위하여 헬기수요의 지속적 창출, 핵심 부품 소재 육성 및 경쟁우위 기술력 확보, 인증 및 운용활성화 인프라 구축, 금융제도 개선 추진, 그리고 헬기 민 군 관 상시 정책조정기능 강화를 5대 추진과제로 제안하였다.

• 대한기계학회논문집
• /
• 제19권2호
• /
• pp.495-508
• /
• 1995

The self-excited vibrations of airfoil is related to the classical flutter problems, and it has been studied as a system with linear stiffness and small damping. However, since the actual aircraft wing and the many mechanical elements of airfoil type have various design variables and parameters, some of these could have strong nonlinearities, and the nonlinearities could be unexpectedly strong as the parameters vary. This abrupt chaotic behavior undergoes ordered routes, and the behaviors after these routes are uncontrollable and unexpectable since it is extremely sensitive to initial conditions. In order to study the chaotic behavior of the system, three parameters are considered, i.e., free-stream velocity, elastic distance and zero-lift angle. If the chaotic parameter region can be identified from the mathematically modeled nonlinear differential equation system, the designs which avoid chaotic regions could be suggested. In this study, by using recently developed dynamically system methods, and chaotic regions on the parameter plane will be found and the safe design variables will be suggested.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.381-388
• /
• 2003

The material deficiencies in the form of pre-existing defects can initiated cracks and fractures. The stress distribution and fatigue crack initiation life of engineering materials may be associated with the size, the shape and the relative location of defects contained in the component. The objective of this study is to investigate the effect of arbitrarily located hole defect around the rivet hole of a wing section in monolithic aluminum and Al/GFRP laminates under cyclic bending moment during a service load. The stress distribution and the fatigue crack initiation behavior near a rivet hole of on the relationships between stress concentration factor ($K_t$) and relative position of defects were considered. The test results indicated the features of different stress field. Therefore, the stress concentration factor ($K_t$) and the fatigue crack initiation behavior was illustrated different behavior according to each position of hole defect around the rivet hole in monolithic aluminum and Al/GFRP laminates.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.1402-1405
• /
• 2003

The main object of this study was evaluated by the delamination damage for fiber stacking angle. Therefore, this work need to compare the shape of delamination for a different fiber stacking angie. So this study uses a method of fatigue test which was created [0]$_2$,[+45]$_2$[90]$_2$. The extension of the delamination zone formed between aluminium alloy and glass fiber-adhesive layer were measured by an ultrasonic C-scan image. As a result, the shapes of delamination zone don't depend upon the crack propagation. We could know that the delamination zone grew interaction between stress flow of fiber layer and crack driving force. Hence, the existing study were applied to the stress transfer, fiber bridging effect, delaminantion growth rate should need to the develop useful factor because of change of fiber stacking angle.

• Advances in aircraft and spacecraft science
• /
• 제2권4호
• /
• pp.427-443
• /
• 2015

The present paper is the follow-on of a former work in which the influence of the gas-surface interaction models was evaluated on the aerodynamic coefficients of an aero-space-plane and on a section of its wing. The models by Maxwell and by Cercignani-Lampis-Lord were compared by means of Direct Simulation Monte Carlo (DSMC) codes. In that paper the diffusive, fully accommodated, semi-specular and specular accommodation coefficients were considered. The results pointed out that the influence of the interaction models, considering the above mentioned accommodation coefficients, is pretty strong while the Cercignani-Lampis-Lord and the Maxwell models are practically equivalent. In the present paper, the comparison of the same models is carried out considering the dependence of the accommodation coefficients on the angle of incidence (or partial accommodation coefficients). More specifically, the normal and the tangential momentum partial accommodation coefficients, obtained experimentally by Knetchel and Pitts, have been implemented. Computer tests on a NACA-0012 airfoil have been carried out by the DSMC code DS2V-64 bits. The airfoil, of 2 m chord, has been tested both in clean and flapped configurations. The simulated conditions were those at an altitude of 100 km where the airfoil is in transitional regime. The results confirmed that the two interaction models are practically equivalent and verified that the use of the Knetchel and Pitts coefficients involves results very close to those computed considering a diffusive, fully accommodated interaction both in clean and flapped configurations.

• 대한기계학회논문집A
• /
• 제32권12호
• /
• pp.1132-1139
• /
• 2008

The aim of this study is to apply shape optimization technique for the repair of aging airframe components, which may extend fatigue life substantially. Free-form optimum shapes of a cracked part to be reworked or replaced are investigated with the objective to minimize the peak local stress concentration or fatigue-damage. Iterative non-gradient method, which is based on an analogy with biological growth, is employed by incorporating the robust optimization method to take account of the stochastic nature of the loading conditions. Numerical examples of optimal hole shape in a flat plate are presented to validate the proposed method. The method is then applied to determine the reworked or replacement shape for the repair of a cracked rib in the rear assembly wing body of aircraft.

• 한국항공우주학회지
• /
• 제33권8호
• /
• pp.26-33
• /
• 2005

틸트로터 비행체 개념인 스마트무인기는 수직이착륙, 장기체공, 그리고 고속비행성능을 동시에 요구한다. 이와 같은 세 가지의 상반된 비행체 성능의 구현을 위해서는 비행모드별로 최적의 공력성능을 갖도록 하는 플랩시스템의 운용이 불가피하다. 스마트무인기의 플래퍼론을 설계하는데 있어서 다양한 후보 형상을 생성하고, 이들 형상에 대해 전산유동해석을 수행하여 각 형상에 대한 공력성능을 분석하였다. 이와 같은 공력성능과 실제형상의 구조적인 단순성을 고려하여 스마트무인기의 최종 플래퍼론 형상을 선정하였으며, 40% 축소모델에 대한 풍동시험을 통해 선정된 플래퍼론에 대한 성능을 검증하였다.

• 항공우주기술
• /
• 제3권1호
• /
• pp.1-8
• /
• 2004

본 연구에서는 MSC/NASTRAN을 이용하여 플러터, 돌풍응답 등의 공탄성 현상에 대한 해석 및 제어에 필요한 일반화된 비정상 공기력 행렬들을 계산하고, 이를 외부 프로그램에서 활용하기 위해 MSC/NASTRAN의 DMAP ALTER를 이용하여 외부 파일로 추출하는 방법을 제시하였다. 또한, 공탄성 해석 및 제어를 위한 지배방정식 구성을 위해 추출된 일반화된 비정상 공기력 행렬들을 최소상태 근사법을 사용하여 근사화하는 방법을 제시하였으며, 이를 단순화된 항공기 날개 구조물 모델에 적용하여 검증하였다.