• 한국항공운항학회지
• /
• 제19권1호
• /
• pp.1-6
• /
• 2011

The free-wing tilt-body aircraft is researched in the flight performance characteristics such as short take-off and landing capability, and reduced sensitivity to gust and center of gravity (CG) change. Due to the main wing separating from the fuselage, the high tiltable empennage, and the stub-wing strongly influencing from the propeller wake, the resulting vehicle aerodynamics and flight dynamics are quite different from those of a conventional fixed-wing aircraft. Using the governing flight dynamics model was studied previously, all of speed and body tilt angle is simulated to determine the flight envelope by a non-linear 3-DOF flight simulation analysis. Though flight performance and trimmability are studied, the flight model of free-wing tilt-body aircraft is to reduce the hidden risk and to achieve the successful flight test. It is analyzed the flight characteristics that distinguishes free-wing tilt-body aircraft from the conventional aircraft.

• 한국항공운항학회지
• /
• 제19권4호
• /
• pp.1-5
• /
• 2011

The free-wing tilt-body aircraft is researched in the flight performance characteristics for center of gravity (CG) change. All of speed, body tilt angle and center of gravity change are simulated to determine the flight envelope by a non-linear 3-DOF mathematical model. In flight, this aircraft configuration changes by the tiltable empennage. Then, flight dynamics distinguishes from those of a conventional fixed-wing aircraft. Though flight performance and trimmability are studied by CG change, the flight model of free-wing tilt-body aircraft is to reduce the hidden risk and to achieve the successful flight test. It is analyzed the flight characteristics by CG change that distinguishes free-wing tilt-body aircraft from the conventional aircraft.

• 시스템엔지니어링학술지
• /
• 제11권1호
• /
• pp.73-79
• /
• 2015

This paper describes boundary analysis for modeling Aircraft Carrier Sortie Generation System(CVSGS). An aircraft carrier, as a super system, is a warship going into battle by operating a number of aircraft on deck and it should be lay down a definition about aviation operations interacting between aircraft carrier and carrier air wing in small deck area. For this reason this paper models common aviation support system for generating sortie basic unit of carrier aviation operations unlike to general warship and defines boundaries between this system and aircraft carrier and carrier air wing. This paper analysis activities of aircraft carrier and embarked carrier air wing in carrier aviation operations, and analysis and defines boundaries Aircraft Carrier Sortie Generation System(CVSGS) to perform core functions in interacting between aircraft carrier and embarked carrier air wing.

• International Journal of Aeronautical and Space Sciences
• /
• 제17권1호
• /
• pp.45-53
• /
• 2016

This work is mainly done by too many manual operations in the aircraft structure design process resulting in heavy workload, low efficiency and quality, non-standardized processes and procedures. A top-down associated design method employing the template parametric technology is proposed here in order to improve the quality of design and efficiency of aircraft wing structure at the preliminary design stage. The appropriate parametric tool is chosen and the rapid design system of knowledge-driven aircraft wing structure is developed. First, a skeleton model of aircraft wing structure is rapidly built up through the template encapsulated design knowledge. Associated design is then introduced to realize the association between the typical structural part and skeleton model. Finally, the related elements are referenced from skeleton model, and a typical structural part reflecting an automatic response for design changes of the upstream skeleton model is quickly constructed within the template. The rapid design system proposed and developed in this paper is able to formalize the design standardization of aircraft wing structure and thus the rapid generation of different aircraft wing structure programs and achieve the structural design knowledge reuse as well.

• 대한기계학회논문집
• /
• 제19권3호
• /
• pp.615-622
• /
• 1995

It may be inefficient to conduct the aeroelastic analysis by using full-scale conventional finite-element analyses or experiments, from the initial design phase, for an aircraft wing which can be considered as the discontinuum complex structure with composite laminated skins. In this paper, therefore more efficient aeroelastic analysis has been conducted for a box-beam typed aircraft wing by using the equivalent continuum beam-rod model which is derived from the concept of energy equivalence. Equivalent structural properties of the continuum beam-rod model are obtained from the direct comparison of the finite-element matrices of continuum beam-rod model with those of box-beam typed aircraft wing. Numerical results by the continuum beam-rod model approach are compared with those by the conventional finite-element analysis approach to show that the continuum beam-rod model proposed herein is quite satisfactory as a simplified model of aircraft wing structure for aeroelastic analyses.

• 한국항공우주학회지
• /
• 제36권2호
• /
• pp.105-114
• /
• 2008

본 연구에서는 고정익과 회전익의 두 가지 모드로 운용되는 canard rotor wing(CRW) 항공기에 대한 사이징과 성능해석 프로그램이 개발되었다. 개발된 프로그램은 기존의 항공기 데이터를 이용하여 각 모드에 대한 검증을 수행하였고 정찰 임무형상에 대해 최적설계 문제를 정의하였다. canard rotor wing의 로터 최적화를 위해 고정익 모드와 회전익 모드에 대해 가중치를 이용한 다중목적함수를 구성하였다. 6개의 서로 다른 가중치와 설계제약조건에 대해 최적설계가 수행되었고 그 결과 개선된 로터형상을 도출하였다.

• 한국기계가공학회지
• /
• 제19권9호
• /
• pp.85-92
• /
• 2020

In this study, the automatic processing of the wing ribs of large aircraft was simulated. Specifically, in the simulation for the automatic processing of the fly ribs, the process of the automated loading device with a robot was examined, along with the wing rib processing and manufacturing automation processes. Moreover, the process time, corresponding to all the stages in the wing rib processing, was calculated. The results pertaining to the machining and manufacturing times of 34 wing ribs (Nos. 1-17), as obtained through the proposed simulation approach, indicated that the total machining time for the left and right wing ribs and rib guns was 537.7 h. The production time was calculated as 1,117.4 h. It is considered that the processing of the wing ribs of large aircraft can be automated in a factory, based on the results of the proposed simulation process.

• 항공우주기술
• /
• 제1권2호
• /
• pp.1-10
• /
• 2002

본 연구에서는 전진익 소형기 항공기 형상에 대한 공력해석을 수행하였다. 전진익 소형 항공기는 주익의 평면형상이 후퇴각을 가진 스트레이크(strake) 형태의 안쪽(inboard) 날개와, 전진각을 가진 바깥쪽(outboard) 날개가 결합되어 있는 형태로 구성되어 있다. 이와 같은 두개의 다른 형태의 날개 평면형상의 결합으로 킹크(kink)로 정의되는 날개의 불연속선이 존재하게 되어, 이 부분에 의한 날개 공력특성의 면밀한 분석이 요구되었다. 전진익 소형 항공기에 대한 기본적 공력계수의 산출 및 유동해석은 해석방법 간의 차이에서 기인하는 정확도를 분석하기 위해 4가지의 방법으로 계산을 수행하였다. 항공기 형상에 대한 격자생성의 용이성을 위해 중첩격자기법(Chimera grid)을 적용하였다. 본 해석을 통하여 전진익 소형기 형상에 대한 기본적인 공력계수의 도출과 함께 주익에 대한 공력특성이 분석되었다.

• 항공우주기술
• /
• 제10권1호
• /
• pp.175-182
• /
• 2011

100인승 이하의 쌍발 터보프롭 항공기의 날개 형상에 대한 최적 설계를 수행하였다. 최적설계는 2단계로 이뤄져 있는데 먼저 꼬리날개의 높이에 대한 방향안정성을 분석하였고 방향 안정성을 갖는 높이에 대해 순항조건에 대해 항력을 최소로 하는 날개의 최적형상을 결정하였다. 방향안정성 분석은 Vorstab를 통해 이뤄졌고, 최적형상은 Piano를 활용하여 결정하였으며 공력해석은 점성을 고려한 Fluent 코드를 활용하였다. 최적설계 결과 약 10 count의 항력을 감소하였다.

• Wind and Structures
• /
• 제31권1호
• /
• pp.15-20
• /
• 2020

The aircraft industry supports aviation by building aircraft and manufacturing aircraft parts for their maintenance. Fuel economization is one of the biggest concerns in the aircraft industry. The reduction in specific fuel consumption of aircraft can be achieved by a variety of means, simplest and more effective is the one to impose minor modifications in the aircraft main wing or the parts which are exposed to the air flow. This method can lead to a reduction in aerodynamic resistance offered by the air and have a smoother flight. The main objective of this study is to propose geometric design modifications on an existing aircraft wing which acts as a vortex generator and it can reduce the drag and increase lift to drag ratio, leading to lower fuel consumption. The NACA 2412 aircraft wing is modified and designed. Rigorous flow analysis is carried out using computational fluid dynamics based software Ansys Fluent. Results show that saw tooth modification to the main wing shows the best aerodynamic efficiency as compared to other modifications.