• Journal of the Korea Institute of Military Science and Technology
• /
• v.16 no.6
• /
• pp.881-888
• /
• 2013

A basic study was performed to develop a mini gas generator by using a commercial automotive airbag inflater. The mini gas generator can be used for industrial and military application like a seat belt pretensioner. Some parameters were experimentally investigated to reduce the size of the inflater. Basic combustion tests were performed in the closed chamber and measured the pressure and the temperature behavior according to the design parameters. From the study, essential parameters were determined to design a mini gas generator.

• Journal of Auto-vehicle Safety Association
• /
• v.11 no.3
• /
• pp.13-18
• /
• 2019

According to the development of autonomous vehicles worldwide, the driver's posture may not be a normal posture but the various seating positions. Recently, a numbers of research activities has been focused to protect of driver and passengers in various seating positions as well as seating postures. In this paper, the occupant injury severity was evaluated with different seat positions, seatback angles and TTF times.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.9
• /
• pp.1019-1027
• /
• 2014

Vehicle-into-pedestrian traffic accidents show a very high mortality rate compared to their frequency of occurrence. Throughout the world, governments and insurance companies tend to establish and implement new safety standards for pedestrian protection. In order to improve the performance of pedestrian protection, the Korean government has evaluated the pedestrian safety of vehicles under the Korea New Car Assessment Program (K-NCAP) since 2007. The pedestrian protection performance has improved gradually, but it remains insufficient. A pedestrian protection system consisting of a hood lift system and a pedestrian airbag can be a solution to pedestrian safety. A pedestrian airbag design procedure based on a newly defined design scenario is introduced to reduce the head injury criterion of pedestrians. The proposed design scenario is discussed from a practical viewpoint and applied to manufacture pedestrian protection systems.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.22 no.1
• /
• pp.36-45
• /
• 2014

Pedestrian to vehicle traffic accidents show a very high mortality rate compared to the frequency of occurrence. In order to improve the pedestrian protection performance of the vehicle, the korean government added a "pedestrian safety" entry from the year 2007. The performance for pedestrian protection of current vehicles gradually improved compared to the past, but it is still insufficient. It was found that the pedestrian protection performance was very weak, such as the top of the bonnet, the A-pillar and under the front windshield. A application of an active hood and pedestrian protection airbags can be countermeasures for these weak points of pedestrian safety. The active hood and pedestrian protection airbags are designed and manufactured to apply to the top of the hood and to the bottom of the windshield. The manufactured system is equipped in a test vehicle and evaluated based on the Korea New Car Assessment Program(KNCAP) test procedures for the performance of pedestrian safety. As a result, the outstanding effect of pedestrian protection has been achieved by the active hood and the pedestrian protection airbag. The rates of pedestrian injury are reduced by 82.2% and 95.4%, respectively.

• Journal of Korea Multimedia Society
• /
• v.13 no.1
• /
• pp.66-75
• /
• 2010

We proposed an occupant sensing system using single video camera and ultrasonic sensor for the advanced airbag. To detect the occupant form and the face position in real-time, we used the skin color and motion information. We made the candidate face block image using the threshold value of the color difference signal corresponding to skin color and difference value of current image and previous image of luminance signal to gel motion information. And then it detects the face by the morphology and the labeling. In case of night without color and luminance information, it detects the face by using the threshold value of the luminance signal get by infra-red LED instead of the color difference signal. To evaluate the performance of the proposed occupant detection system, it performed various experiments through the setting of the IEEE camera, ultrasonic sensor, and infra-red LED in vehicle jig.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.8 no.3
• /
• pp.163-170
• /
• 2000

Accident statistics shows that the portion of fatal occupant injuries due to side impacts is considerably high. The side impact usually leads to a severe intrusion of side structure into the passenger compartment. Furthermore, the safety zone for the side impact is relatively small compared to the front impact. Those kinds of physics for side impact frequently result in a fatal injury for the occupant. Therefore, NHTSA and EEVC are trying to intensify the regulation for the occupant protection against side impact. Both the regulation and recent market trends are asking for an installation of side airbag. There are several types of system configuration for side impact sensing. In this paper, we adopt the acceleration-based remote sensing method for the side airbag control system. We mainly focus on the development of hardware and crash discrimination algorithm of remote sensing unit. The crash discrimination algorithm needs fast decision of airbag firing especially for high-speed side impact such as FMVSS 214 and EEVC tests. It is also required to distinguish between low-speed fire and no-fire events. The algorithm should have a sufficient safety margin against any misuse situation such as hammer blow, door slam, etc. This paper introduces several firing criteria such as acceleration. velocity and energy criteria that use physical value proportional to crash severity. We have made a simulation program by using Matlab/Simulink to implement the proposed algorithm. We have conducted an algorithm calibration by using real crash data for 2,500cc vehicle. The crash performance obtained by the simulation was verified through a pulse injection method. It turned out that the results satisfied the system requirements well.

• Journal of the korean Society of Automotive Engineers
• /
• v.17 no.2
• /
• pp.14-23
• /
• 1995

여기에서는 에어백의 수학적인 모델과 유한요소 모델에 대한 모델링 기법과 이에 대한 발달과정을 간략하게 고찰하고 설계에의 적용 예를 들어, 승객거동해석 시뮬레이션 및 설계를 에어백을 중심으로 서술하고자 한다. 1. 에어백 모델링 발달과정. 2. 에어백의 모델링에 관한 고찰. 3. 승객거동해석 시뮬레이션. 4. 설계의 적용 예. 5. 향후 전망.

• Proceedings of the Korean Fiber Society Conference
• /
• 2002.04a
• /
• pp.243-246
• /
• 2002

자동차 차체 제작을 위해서는 차체의 견고성과 승객의 안전성을 동시에 고려하여 너무 강하거나 너무 무르지 않은 재질의 선택과 차체 설계의 최적화가 요구된다. 본 논문에서는 차량 충돌 시 자동차의 안전도를 향상시키면서 차량의 손상을 최소화 함으로써 수리비를 절감하기 위한 목적으로 TPU(Thermoplastic Polyurethane Elastomer)에 공기를 채워서 만든 에어백 자동차 범퍼를 개발하였다. (중략)

• Proceedings of the Korean Fiber Society Conference
• /
• 2007.11a
• /
• pp.201-202
• /
• 2007

• Transactions of the Korean Society of Automotive Engineers
• /
• v.20 no.3
• /
• pp.13-19
• /
• 2012

The fatalities rate for passenger vehicles, vans, and commercial vehicles is 1.23, 1.90 and 2.46 deaths per 10,000 registered vehicles, respectively. This shows that vans and commercial vehicles are vulnerable compare to passenger vehicles. To evaluate the crashworthiness of van and Light Truck Vehicle(LTV), we carried out frontal offset crash test at 64km/h, 40% overlap as per IIHS(Insurance Institute for Highway Safety). The test result show that LTV is very poor to protect occupant at frontal crash cause there is no safety system such as airbag and pretensioner and front end length(distance from front bumper to steering wheel) is short. One of the van rated as the lowest rating even it is equipped with airbag, cause its safety cage was collapsed during the test. This result shows that the structural integrity is very important in terms of occupant protection.