• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.1035-1040
• /
• 2004

In the proto design stage of a new car, the performance of an occupant protection system is often evaluated by CAE instead of the real test. CAE predicts and recommends the appropriate design values hence reducing the number of the real tests. However, the existing researches using CAE in predicting the performances do not consider the uncertainties of parameters, in which inconsistency between the actual test results and CAE exists. In this research, the optimization procedure of a protection system such as airbag and load limiter is suggested for the frontal collision. The DACE modeling known as Kriging interpolation is introduced to obtain the meta model of the system followed by the tabu search method to determine a global optimum. Finally, the distribution of a suggested design is determined through the Monte-Carlo Simulation.

• 한국자동차공학회논문집
• /
• 제6권6호
• /
• pp.98-106
• /
• 1998

In this study a control law and performance potential of semi-active suspensions for a tractor/semi-trailer have been investigated. The control law for airbag semi-active suspensions modeled in this study is developed using feedback linearization and Linear Quadratic (LQ) optimal control method. Inherent nonlinearity of the airbag suspensions has been considered in the control law development. It has been shown that the proposed semi-active control law provides better performance than that of well known sky-hook damping control strategy.

• 마이크로전자및패키징학회지
• /
• 제22권4호
• /
• pp.105-109
• /
• 2015

이 연구에서는 자동차용 에어백 작동에 쓰이는 가속 센서에 대해, 그 실장 방법에 따른 신호 전달 차이를 해석하였다. 실장 방법은 기존에 쓰이는 하우징을 사용한 모듈 형태와, 센서를 직접 자동차의 구조물에 접합재를 사용하여 부착하는 두 가지 방법을 고려하였다. 신호 전달을 분석하기 위하여, 충격 실험 장비가 구축되었고, ㄷ자형 알루미늄 채널을 이용하여 그 표면에 기존의 모듈 채결 방법과 센서를 직접 부착하는 방법을 사용하여 시편을 제작하여, 충돌 실험 후 측정된 파형을 비교하여 그 차이를 분석하였다. 또한 유한요소법을 이용하여 충격 실험을 모사하였고, 계산 결과를 실험 데이터와 비교하였다. 그 결과, 기존의 모듈형태의 부착 방법보다, 이 연구에서 제시된 접착제에 의해 직접 부착된 센서가 측정한 신호가 상대적으로 잡음없이 깨끗하고 강한 것을 알 수 있었으며, 또한 에어백 센서와 같은 MEMS 센서는 부착 방법에 따라 주변의 간섭 효과에 의해 그 성능이 크게 변하는 것을 알 수 있었다.

• 한국자동차공학회논문집
• /
• 제21권2호
• /
• pp.104-113
• /
• 2013

New USNCAP has been carried out by NHTSA including front and side crash from MY2011. In this paper, test results for USNCAP Side crash were reviewed by statistical analysis. This review focused on side crash test results to investigate the effect of changes from new USNCAP side crash test protocol among 30 passenger cars. These results were summarized as followings. Total number of 5 star vehicles on the front seat dummy (16 vehicles, 53.3%) was slightly smaller than the rear seat's (17 vehicles, 56.7%) in MDB test. For the ES-2re dummy, chest injury, ie maximum rib deflection contributed to 66% in the mean value of $P_{joint}$. Pelvis injury was highly dependent upon performance up to 87% in the SID-IIs dummy cited on the rear seat in average $P_{joint}$. For Pole test, pelvis injury made contribution to the average performance to 83%. For standard deviation, it showed the largest value in the same body region as the mean value for each dummy. Overall front seat performance showed 14 vehicles, 44.6% with 5 star vehicles less than each MDB or Pole test result. This result showed that performances in MDB test were different pattern to Pole test on driver position. Number of 5star vehicles for overall side NCAP performance are 18 passenger cars (60%). Curtain airbag and driver thorax airbag were equipped in all test vehicles. One vehicle is equipped with thorax airbag in the rear seat. Results from two side tests considered as reliability problem, ie the cause for large standard deviation in side crash test. Consequently, the countermeasure for new USNCAP side crash test is essential to design the effective side structures for side collision and to control well dummy kinematics with curtain and thorax airbag in order to reduce chest and pelvis injuries.

• Journal of Power Electronics
• /
• 제14권1호
• /
• pp.183-193
• /
• 2014

Due to the requirements for high reliability and accuracy, safety issues for airbag ignition systems need to be studied. In this paper, a high-voltage piezoelectric converter is designed to improve these requirements in airbag ignition systems. The proposed converter includes an inverter drive circuit, a Rosen piezoelectric transformer (PZT), an output circuit and a feedback control circuit. The key components of the high-voltage piezoelectric transformer are analyzed in detail. In addition, the proposed converter system is simulated and implemented for testing. The experimental results show that when the power supply is turned on, the charging time is less than 800ms. Furthermore, the output voltage of this converter can be kept between 2.9kV and 3.1kV, under high-efficiency constant current charging mode and zero-voltage switching conditions.

• 한국자동차공학회논문집
• /
• 제21권6호
• /
• pp.100-107
• /
• 2013

Although automotive safety technologies have been developed steadily, the efforts for pedestrian protection still seems to be insufficient. In a car-pedestrian accident, the structures such as the engine under a hood, the lower part of a windshield and the A-pillar are the major causes of fatal pedestrian injuries. Recently, there have been several studies on the active safety system to reduce the pedestrian injuries. The safety system consists of an active hood lift system and a pedestrian airbag. In this research, the safety performance of the active hood lift system and the pedestrian airbag is investigated by using the finite element method. The finite element model of the system is set up based on the head impact test, and the impact analyses are performed. The necessity and the usefulness of the safety system are verified.

• 대한조선학회논문집
• /
• 제54권5호
• /
• pp.439-446
• /
• 2017

This paper deals with an experimental study of the dynamics of an underwater bubbles and shock waves, generated by rapid underwater release of highly compressed gas. Aribag inflators, which are used for automobile's airbag system, are used to generate the extremely-rapid underwater gas release. Experimental studies of the complex underwater bubble dynamics as well as underwater shock wave were carried out in a specifically designed cylindrical water tank. The water tank is equipped with a high-speed camera and pressure sensors. The high-speed camera was used to capture the expansion and collapse of the gas bubble created by inflators, while pressure sensors was used to measure the underwater shock propagation and magnitudes. The experimental results were compared against the results of explosion of pentolite explosive. Several physical phenomena that has been observed and discussed, which are different from the explosive underwater explosion.

• 한국자동차공학회논문집
• /
• 제17권1호
• /
• pp.176-181
• /
• 2009

The passenger airbag(PAB) designed for standard sized adults may induce unexpected results to children in out-of-position(OOP) postures. In this work, using MADYMO software, simulations of the OOP injury of children have been performed with respect to PAB design parameters and child dummy positions. The attention is focused on some details with respect to the injury of 3 and 6 year old children in two OOP postures. Among the various design parameters of the passenger airbag systems, four parameters are selected for the sensitivity analysis of the injury with the Taguchi method: bag folding pattern, vent hole size, position of the cover tear seam and the type of door tear seam. An optimal combination of the parameters is suggested.

• 오토저널
• /
• 제25권6호
• /
• pp.59-62
• /
• 2003

• 오토저널
• /
• 제13권5호
• /
• pp.35-41
• /
• 1991