• 한국가시화정보학회:학술대회논문집
• /
• 한국가시화정보학회 2006년도 추계학술대회 논문집
• /
• pp.17-20
• /
• 2006

Passenger safety is fundamental factor in automobile. Among much equipment for passenger safety, the air bag system is the most fundamental and effective device. Beside of the front air bag system which installed on most of all automobiles, a curtain-type air bag is increasingly adapted in deluxe cars fur protecting passengers from the danger of side clash. Curtain type airbag system consists of inflator housing, fill hose, curtain airbag. Inflator housing is a main part of the curtain-type air bag system for supplying high-pressure gases to deploy the air bag-curtain. Fill hose is a passageway to carry the gases from inflator housing to each part of curtain airbag. Therefore, it is very important to design the vent holes of fill hose for good performance of airbag deployment. But, the flow information from vent holes of fill hose is very limited. In this study, we measured instantaneous velocity fields of a high-speed flow ejecting from the vent holes of fill hose using a dynamic PIV system. From the velocity Held data measured at a high frame-rate, we evaluated the variation of the mass flow rate with time. From the instantaneous velocity fields of flow ejecting from the vent holes in the initial stage, we can see a flow pattern of wavy motion and fluctuation. The flow ejecting from the vent holes was found to have very high velocity fluctuations and the maximum velocity was about 480m/s at 4-vent hole region. From the mass flow rate with time, the accumulated flow of 4-vent hole has occupied about 70% of total flow rate.

• 대한기계학회논문집A
• /
• 제37권1호
• /
• pp.129-135
• /
• 2013

자동차 측면 충돌사고는 충격흡수공간이 충분하지 않기 때문에 정면 충돌사고와는 달리 발생빈도에 비하여 탑승자의 상해비율이 매우 높은 경향을 나타낸다. 측면 충돌사고 발생시 탑승자를 보호하기 위하여 전세계 각국에서는 자동차안전기준 및 안전도평가 등의 법규를 시행 및 강화하고 있다. 그러나 차체 자체의 충격흡수력을 이용한 수동 안전방식으로는 협소한 공간에 기술을 적용하는데 한계가 있다. 커튼 에어백은 측면 에어백과 함께 현재로서는 측면충돌시 탑승자를 보호하는 가장 효과적인 시스템이다. 본 연구에서는 측면 충돌사고 발생시 탑승자의 머리상해지수를 감소시키기 위한 커튼 에어백의 최적설계를 수행하였다. 충돌 시뮬레이션을 바탕으로 직교배열표와 일원표, 그리고 반응표면법을 순차적으로 적용하고 각각의 결과에 대하여 확인실험으로 검증하여 커튼 에어백의 최적설계를 수행하였다.

• 소성∙가공
• /
• 제18권2호
• /
• pp.172-176
• /
• 2009

In this paper, new aspherical surface polishing mechanism is suggested to polish aspherical glass lens mold by both airbag polishing tool and reverse-rotational eccentric motion. Up to now, conventional aspherical lens polishing method by the small tool polishing uses the aspherical surface profile and the trajectory of the polishing tool is also controlled. However, full contact concept by airbag polishing tool and no position control make the easy polishing setup and does not need aspherical design profile. An aspherical lens polishing machine was made for this study and a tool mark removal experiment fur the fine-grounded lens mold was successfully performed.

• 한국자동차공학회논문집
• /
• 제4권5호
• /
• pp.9-15
• /
• 1996

A silicon microaccelerometer is designed and fabricated using silicon epitaxial layers for automotive electronic airbag applications. A cantilever structure is chosen for high sensitivity and piezoresistive detection method is adopted for circuit simplicity and low cost. An optimum design is used to find optimum microstructure sizes for maximum sensitivity subject to performance requirements and design constraints on natural frequency, damping ratio, maximum allowable stress and microfabrication limitations. The microaccelerometer is fabricated by micromachining processing steps, composed of material-selective and orientation-dependent chemical etching techniques. Fabricated prototype shows a sensitivity of 88.6$\mu\textrm{V}$/g within a resonant frequency of 1.75KHz. Estimated performance of the microaccelerometer is compared with measured one. Discrepancy between the theoretical values and the experimental values is discussed together with possible sources of the errors.

• 한국자동차공학회논문집
• /
• 제21권6호
• /
• pp.8-15
• /
• 2013

Wide range frequency pulses occur in a car crash test. Until now, low frequency under 400Hz has been used to determine an airbag deployment criteria. Also, FIS (Front Impact Sensor) has been used to detect the crash pulse in early stage. Nowadays, technology to determine an airbag delpoyment criteria by using a high frequency crash pulse without FIS is being focused on. In this paper, the signal transmissibility of high frequency pulse for two different cars was studied. Also, signal transfer test of high frequency pulse was done by using a high speed ball impact. Signal runtime of the frontal impact is compared with that of the side impact. The signal transmissibility difference due to the car structure difference was discussed and structure change for improving the signal transmissibility was proposed.

• Journal of Multimedia Information System
• /
• 제3권3호
• /
• pp.69-76
• /
• 2016

Currently, research on more convenient and safer cars for drivers and passengers, the intelligent cars, are being actively conducted. The researches involve designing systems that intelligently minimize physical damages caused by car accidents, not just pursuing passive safety measures like airbags or safety belts. However, there are many cases around the world where airbags cannot be activated in times of accidents and it is difficult for consumers to check if their airbags will be activated, especially for the old-style cars. Thus, in this paper, a base technology for an application that can determine whether the airbags will actually be actuated at a critical moment based on the mechanical calculations is being introduced.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2003년도 The 8th Asian Symposium on Precision Forging ASPF
• /
• pp.86-89
• /
• 2003

Airbag is important part for ensuring the driver and passenger's safety. The generator parts are typical parts difficult to be formed. BRIMET developed precision forming technologies for these parts and the technology has been applied in batch production. The parts produced by these technologies have been installed in some domestic trade mark cars. The technologies all have applied for patent.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2003년도 봄 학술발표회 논문집
• /
• pp.299-304
• /
• 2003

The design of an occupant protection equipment has been considered as the important process in developing a new car since the crash performance plays an important role on the market. The cost is increased when an unexpected real test is carried out in the proto-design stage. Thus, the exact prediction of a crash performance can reduce the number of full-car test. In this research, the robust design of an airbag system considering the frontal crash is suggested to predict the more reliable responses. On the contrary, most existing researches do not consider the uncertainties. The uncertainties treated in this research are the tolerances of the vent hole, the time to fire and the length of a strap in airbag and the tolerance of the load limiter load in seat belt. The Taguchi method is utilized to determine the robust optimum of each parameter

• International Journal of Automotive Technology
• /
• 제7권2호
• /
• pp.195-199
• /
• 2006

According to the United States FMVSS 208, every passenger car on the market after September of 2006 must install a safety system, which can deploy the airbag with different intensity or suppression based on the passenger type, to reduce infant and child injuries from airbag deployments. The Weight Classification System, which has been developed by Hyundai Autonet, is a system that classifies the person occupying the passenger seat. To overcome sensing problems due to the weight sensors small voltage, the Distributed Systems Interface is adopted.

• 한국자동차공학회논문집
• /
• 제21권5호
• /
• pp.130-135
• /
• 2013

Until now, passenger airbag design is based on the referred car design and many repetitive crash tests have been done to meet the crash performance. In this paper, it was suggested a new design process of passenger airbag. First, key performance factors were determined by analyzing the injury risk effectiveness of each performance factor. And it was made a relationship between injury risk and performance factor by using the response surface model. By using this one, it can be predicted the injury risk of head and neck. Predicted injury risk of optimal design was obtained through this injury risk prediction model and it was verified by FE analysis result within 18% error of head and 9% error of neck. It was shown that a target crash performance can be met by controlling the key performance factors only.